88 models
This tape dispenser is a one-piece, foldable design similar to 3M's tape holder, but enclosed. There are two versions for 1in and 2in wide tape rolls.
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
This insertable bin is 2x2 units footprint, and one unit high. It's stackable, and compatible with Auer (tested), and might be compatible with more of the similar systems. Pictures show dual colour prints - the files attached do not have…
Print approx. €6.68–€8.17 excl. taxPreliminary estimate for PETGSource material: PET
I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…
I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…
A beverage can dispenser made of strong stackable modules that can hold any amount of a beverage you would like to have on hand. Either in your fridge or elsewhere. I wanted it for my redbull addiction, but I used parametric design so I…
This design is based on Fukar's design: https://www.thingiverse.com/thing:3245139 My additions/modifications are: Mounting options for both screws and magnets (10x2mm magnets) This design prints in one piece, which increases part strength…
Battery holders/dispensers for IKEA Skadis peg board. 18650 Holds up to 9 batteries, works with protected cells as well. Both sides need to be printed. Pegs in the holder are ofset by 20mm to mount properly and not take up too many peg…
The print is fairly straight forward. You have to print the two “inside” parts and then print two mirrored (you can mirror it in your slicer) copies of the outside panel and glue it together. The letters are optional but certainly add…
These stackable tea dispensers hold 25 teaspoons of your favorite loose tea and dispense them one teaspoon at a time with each pull of the sliding “drawer”. The last cross-section photo show how the slider cavity fills up when the slider…
These functional and practical 3D prints are new and improved over my original design. Thanks to feedback from user @SteveS42 and others on my first design, I think you'll find this version works much better. I have included several 3MF…
I love the can dispenser by @Enigma , but it did not fit my refrigerator. So I created a parametric Fusion 360 model, that could be scaled to different lengths. When using the parametric model, be careful, and change the length in baby,…
I designed these battery dispensers to mount on pegboard with holes spaced 25.4mm / 1 inch on center. Each holds many cells, is loaded from the top and dispenses from the bottom front with plenty of room to grab batteries. They're fun to…
PET BISCUIT DISPENSER and WATER DISPENSER BOWL (still in development 5 years later) NEWEST Updated to V6.0a Added a full new thread that supports mason jar perfectly Vers 5.0 Altered the angle of the dispensing chute and opening, plus…
I love the battery dispensers by makingwithsteve on Thingiverse, but I found that gluing them together was a little too finicky for me. I decided to add some pins to the original model and make it all a snap together print with no glue…
key to open the toilet paper dispensers in public restrooms
FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…
Just like the original model: print out all the parts of the size you'd like : AA or AAA. Preparation Use a pair of needle nose pliers and twist to take out the built-in support. Start from the outside edges and move in toward the back,…
Designed some AA & AAA battery dispensers that mount onto my peg board. Will be entering it into Prusa's "Practical and Functional Models" contest. I am willing to send you the .STEP file for the peg board connector since mine is specific…
Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.
A few screws are needed for assembly, as shown in the picture. A good location to mount them is in a utility room or garage.
This is a remix of Bruce's Winchester sized primer dispenser along with the original CCI sized dispenser at https://www.thingiverse.com/thing:2939986 I added pegboard pegs on the back of each so I can hang them to make room on my…
Design allows for easy refills. The hole in the back was added for an easier dispensing experience. If you work with 35 mm petri dishes, it's likely that they have lips that help them stack on top of each other. These lips may sometimes…
Update 2022-11-16 : A new and improved version has been uploaded. https://www.printables.com/model/318791-handy-magnet-dispensers-v2 This version is deprecated. Please see the new version linked above. These functional and practical 3D…
I started this battery dispenser project with the following design goals: It should enable a FIFO (First-In, First-Out) system It should hold 24 batteries ("value pack" sized) It should have a front-loading slot (at the top) It should be…
You can print a key using both a 0.4 and 0.6 mm nozzle. Lay it with the handle flat on your printbed. Supports may be needed, but a key printed this way will be more durable than one printed vertically.
I cut the model to keep the Mason Threads and made the bowl smaller to fit on a 180mm x 180mm x 180mm Build Volume.
Thank you GarageMonkeySan for this well designed and practical tool! The original, and this remix, are shaped for fridges that dispense water separate from the ice. **If you have a combo Ice/Water dispenser, which many modern fridges do,…
This dispenser design was updated on the 11.04.2022 the new video: https://youtu.be/i5p_7xmLVT8 I would print all the parts in PLA with 4 parimerters and an infill of 5% you need: 10 woodscrews ~3mm x 18mm (or just see what screws roughly…
added C battery model 2026-03-31 Assembly is easy, but to keep the part simple to print when you put the two pieces together some sort of glue is recommended. I used two drops of superglue in the corners to hold the Ramp and Frame in…
A compact bathroom tray for soap dispensers and other bathroom bottles. Dimensions 77mm by 217mm . Fits three regular size bathroom bottles, such as mouthwash, cleanser and soap dispenser. Printed with: 0.15 layer height Polyterra White…
Multi-Usage Design This means the design is made for simple 3d print them by also keeping the opportunity to just change some parts to fit different tapes. Current STL design here is for a tape with ID=77mm and a width of 20mm. The green…
Use these super cute piping bag organizers to keep your piping bags tidy and readily accessible, with two fingers you can quickly pull any size piping bag out of the container and the next is ready to go. There are three sizes of…
Stackable Can Dispensers for 400ml Standard Cans
Drip catcher / drip tray for soap dispensers, if the soap dispenser doesn't hold the soap properly and it doesn't always run onto the sink, printed in PETG / PLA, to be glued on with double-sided tape or similar adhesive methods. Simply…
3D-print against proprietary solutions We share the restrooms in our hackerspace with other tenants on the same floor. Once a week the cleaning staff does their thing (except refilling the soap, but that's another story), including…
Drip catcher for wall-mounted automatic hand sanitizer dispensers. Print instructions Category: Household Summary Drip catcher for wall-mounted automatic hand sanitizer dispensers. Print Settings Printer Brand: Creality Printer: Ender 5…
A simple remix to add a glass window to the dispensers
AAA and AA Western Revolver Styled Battery Dispensers Just messing around in Fusion and made this Revolver style battery holder to keep six AAA batteries to hand. In three pieces, easy to print with no supports needed. Slot the Barrel…
Print with only touching-buildplate supports. Knob press fits on after inserting the dispensing drum. Depress the detent with a screw driver or something stick-y when inserting the drum, until it fully seats down. Lay it on the opposite…
Reworked from Battery dispenser AA & AAA by literally scaling adding a little support to strengthen and amending text. Category: Organization
OVERVIEW The large dispensers can store rolls that have a 3" (76mm) internal diameter and up to 5 ½" (140mm) external diameter. The variants support the following widths: ¼" (6mm); ½" (13mm); ¾" (19mm); 1" (25mm); 1 ½" (38mm); and 2"…
These models are designed to hold Ball brand reusable canning jar dispensers, both small and large sizes. They can stack up to 6 lids in each dispenser. A lip at the bottom helps to hold lids in while moving or using the dispensers.…
See the drawing for details, this should fit common UK towel dispensers found at commercial sites _______________ We upload those models for personal use only, free of charge - to promote our website : https://www.phoenixsystemsuk.com If…
--V1.2-- Added _TS for those who wants to print without corner brims and smaller spindle to accommodate wire spools with smaller internal diameter. --V1.1-- Adjusted fittings of conical ends to the spindle. --V1-- Too many wire spools,…
Like the original design print the outside twice and the inside once. There is also a battery icon which can be attached to the front.
Abroller für Tesafilm Rollen
Introducing the fascinating "Snail-inspired Tape Organizers and Dispensers" model—an incredible creation designed to revolutionize your tape management experience. This dispenser takes inspiration from the snail's unique characteristics,…
Stubby, less space inside DOES mean you have to refill it more often, but it also means that it will have less time to cake and stick all together, and always fresh Various spices and a plain design Let me know if you need a different top…
these dispsencers are made for Nespresso's Verto pods/capsules. Made for any sizes of pods
STL files are included for CR2016, CR2025, CR2032, and CR2477 coin cells. The caps should be printed with supports for the coin cell slot. I've found that organic supports work best. They can be a bit tricky to remove from the narrower…
Dimensions: 17 x 6.5 x 14 cm Material: PLA
Dispensers for the 500 and 170 count boxes.They work with the old and new boxes.Please feel free to rate and review.
The ring on our cup dispensers is unfortunately broken, and it would be a shame to order a new dispenser just for this reason. Simply replace it, and you're good to go. It works for large cups starting from 650ml. Deutsch: Der Ring an…
Replacement Wipe-Down Blade for 2" Uline Tape Dispensers. I printed it from PETG to allow it to flex without breaking when pressing down on a box or tape.
Some of the battery types, combination of battery types, and dimensions didn't support my needs so I made my own battery dispensers. Models were made in FreeCAD and can be used to modify depth, height, battery types, and combination of…
I got tired of trying to fill water bottles from the ice dispenser on our Samsung fridge. We have gone thru the same issues with a variety of other brands at friends, family and rental houses. Grandkids spraying ice on hardwood floors was…
Dispensers for US rolled (100 stamp) postage The model includes plain and embossed dispensers (1st class, extra oz).
Modern Hexagon Tape Dispenser Design Created from Scratch Designing this model was quite the challenge. Starting off I knew I wanted a modern look while in some way changing the normal function of a tape dispenser. So, I strived to place…
Keep the magic alive while refilling your soap dispenser without disturbing the fish or turtle on the insert inside the bottle.
Please roast me if this does not fix the issue for you
SKADIS Flux & Solder Paste Holder (4x Dispensers) Tired of flux or solder paste syringes rolling around your desk or falling over? This SKÅDIS-mounted holder keeps up to 4 dispensers secure, upright, and always within reach Features Holds…
I reworked the files in SolidWorks to make it parametric to create other sizes and change the shape of the slot in the top. I'll be adding more files/sizes as needed. Size reference: 2x7 fits gallon bags
Display and store teabags. Choose either 70mm and 90mm width. Print with Tree Support 17 Feb 2026 UPDATE: Increased window size for teabag display. 19 Mar 2026 : added teabag tweezers, for easy teabag retrieval
This design has been created to organize the magnet dispensers designed by Brian Dean in an upright position to optimize space consumption in my drawers. A modular design allows to arrange the baseplates in a linear order. FreeCad-File…
Printed with silver PLA: Extruder: 210 °C Bed: 60 °C
If your mom asks you for something to hold her Tuppwerware oil and vinegar containers , would you not design it? :D
There are two versions as a step-file and the Fusion360 Model. For other batteries beside AA and AAA you can adjust the parameter settings in the Fusion360-file. The parameters should be adjusted in several steps so that the model can be…
Gridfinity holders for Tesa tape dispensers and pencil sharpeners
***WILL NOT WORK WITH TAMIYA STANDARD MASKING TAPE*** Created a tape dispenser for Kamoi Masking Tape. I BOUGHTthis tape on Amazon as a alternative to Tamiya masking tape. When I bought the taper I realized that the tamiya dispensers…
Optimized replacement for smooth unrolling This is a custom-made replacement insert for common kitchen foil or plastic wrap dispensers (especially the magnetic, refillable models with an integrated cutter). The original insert of many…
Gridfinity holders for scissors and correction tape dispensers
Full Description: One-piece 3D-printable holder designed specifically for cylindrical automatic/touchless liquid soap dispensers that measure approximately 3 inches (76.2 mm) in diameter - including popular models such as the OHIFAST 12.8…
Many center-pull paper towel dispensers eventually lose their ability to cut the paper properly because the original plastic teeth become dull or worn down. When the grip fails, you often end up pulling out much more paper than you…
A wall-mounted battery organizer made of separate modules. Load batteries in the top and take them from the tray at the bottom. A 10° ramp rolls the next battery forward, one at a time. Features Fill gauge: a sight window with numbered…
added C battery model 2026-03-31 Assembly is easy, but to keep the part simple to print when you put the two pieces together some sort of glue is recommended. I used two drops of superglue in the corners to hold the Ramp and Frame in…
I got tired of trying to fill water bottles from the ice dispenser on our Samsung fridge. We have gone thru the same issues with a variety of other brands at friends, family and rental houses. Grandkids spraying ice on hardwood floors was…
***WILL NOT WORK WITH TAMIYA STANDARD MASKING TAPE*** Created a tape dispenser for Kamoi Masking Tape. I BOUGHTthis tape on Amazon as a alternative to Tamiya masking tape. When I bought the taper I realized that the tamiya dispensers…
FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…
Dispensers for US rolled (100 stamp) postage The model includes plain and embossed dispensers (1st class, extra oz).
Please roast me if this does not fix the issue for you
I reworked the files in SolidWorks to make it parametric to create other sizes and change the shape of the slot in the top. I'll be adding more files/sizes as needed. Size reference: 2x7 fits gallon bags
Use these super cute piping bag organizers to keep your piping bags tidy and readily accessible, with two fingers you can quickly pull any size piping bag out of the container and the next is ready to go. There are three sizes of…
Optimized replacement for smooth unrolling This is a custom-made replacement insert for common kitchen foil or plastic wrap dispensers (especially the magnetic, refillable models with an integrated cutter). The original insert of many…
I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…
![Skadis Mountable Battery Dispensers (AA, AAA, 18650) [Remix]](https://media.printables.com/media/prints/249888/images/2246798_75dcb08f-f2a9-4a08-b0c6-adff86645ce4/skadis_battery_dispensers.jpg)
