336 models
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
Good for vase mode and scaling too! Uses Fibonacci sequence to create the pattern. Enjoy!
Drippy bucket, its now leaking paint onto your desk. Bigger drips and large and small paint leak's. PSA: I am not responsible for damage to any of your property from leaking paint! Inserts for the Drippy bucket found here.…
Remix of the famous ‘Drippy Bucket’ I loved the design so much but it was taking more than 12hrs to print just the bucket and drippy. I wanted something which was a slim version of the same so I made on (made one completely from scratch).…
A preparation used to facilitate the dripping of unused resin from the platform back into the tray. It is simple to use, just remove the platform from the beam and slide it onto the fixture, which clips onto the beam.
Mini Drippy Weed Drum - Scaled down 1/8ths 3 Parts
Update: Widen the hole a bit, making it easier to mount the tootbrush. New version do not need any supports. Small head stand for standard electric toothbrush heads. Since the brushes tend to drip some leftover toothpaste, I included a…
Print profile 0,20mm SPEED (Input Shaper) No glue needed, all snap connections, and I recommend printing in PLA for dimensional stability, however others have had success with PETG as well. As described by the original author
Hello, Today I have for you a Stain dripping from the edge . It is suitable as a decoration for Halloween! It is like slime :-D. For proper functionality, you need to use a Printing Profile! I used PLA/PETG as the material. No need to use…
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
This dripper stand is made specifically for the Hario size 02 plastic dripper, but I've provided my original Fusion 360 file (f3d) which is fully parameterised. The provided version of the .3mf and .stl has an inside diameter of 50mm. If…
No more wasted dish washing liquid! 👍💰 Print instructions: Material: PETG Layer: 0,15 mm Perimeters: 2 Infill: 25% Supports: No Brim: Optionally This model requires some special settings, more details in the attached 3MF file. Custom…
I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
A simple 20×12 cm wall shelf with additional braces for improved rigidity. You will need 3 M3 screws and nuts for the assembly. A solid ("one piece") version is available as well. For the best possible finish print as shown on the…
Fits into the bottom and top of the “wall-honeycomb-part.stl”. I have mine held together using the tri-hollow inserts where the borders connect, and then a dual-hollow insert on the ends. I may end up modifying the pieces into a left and…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
A decorative "dripping" (or "melting") brim attachable to the original honeycomb wall by RostaP . It's available as a single solid piece (16 hexagons, 333×77×8 mm) and split in 2 parts (8 hexagons, ~170×77×8 mm each) fitting a regular…
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…
Inspired by the drippy bucket I wanted to challenge myself to designing a dripping ice cream cone. From this I wondered how it could be used practically and thus spawned the drippy shifter. This design is made up of multiple parts with…
Drippy Tissue Box For tissue boxes with max. 230 x 115 x 65 mm 0.20mm Standard support only for main part PLA / PETG
Here’s a fun little illusion piece I designed—looks like a bright puddle dripping down the edge of your shelf or cabinet. It’s a single-piece print that creates the effect of spilled paint, slime, or wax frozen mid-drip. I printed mine in…
Hey guys, This is my first model ever published so please adjust your expectations to the learning curve:) This is as buildplate holder for Reality Halot Mage. I had those in the past for my other printers and I've experienced the…
Printed in PLA layer hight 0.15mm Made also a nice key, so the opening of the piggy bank is more authentic.
USS Dripper – Universal Liquid Transfer Funnel No space for waste. The USS Dripper is a two-part funnel designed to make transferring the last remains of thick fluids (like laundry detergent) from one bottle to another easy, clean, and…
HALOT-MAGE PRO Buildplate holder for dripping
I designed components for my greenhouse irrigation system. It fits regular 1/2" (13 mm) hose and 4.6 mm hose (tested on Gardena irrigation 4.6 mm hose). Dripper endpoints are adjustable so them allow to set the desired amount of water for…
i wanted Multi-purposes box with cover and the same design with Self-watering SO i came with this and big thanks to the original design https://www.prusaprinters.org/prints/73258-drippy-bucket-with-divider-insert which helps me alot Happy…
This is the version 2 which utilize all of your feedback together. While it is not recommended to print in 1 piece as the layer adhesion will reduce part strength and make it easy to break. Two part are separated as the original version…
12/26/2025 Added V3 3 layer wall version after noticing that certain fillaments would break at the 2 layer transition point. Tolerances are tight! If it does not fit on the first try, scale up 1%. Material: PLA or PETG Layer Height: 0.2mm…
Printed holder for origami dripper. Similar dimensions to the original transparent holder, it fits for sure for glass servers from Hario. You have to turn the model over and you can print without supports. I printed on Anet A8.
Il modello è una carina rivisitazione dei celebri ed utilissimi contenitori per il Pegboard IKEA Skadis. Aggiungono tanto colore:) I just designed the container as much the same as possible to the original from IKEA and added the emboss…
I made a remix of the Drippy Box without handles and a little bit bigger, so all my daily chargers and cables find a good looking place… The measures are at 100% ~ 15x10x9,5cm. ___________________________________ My print settings:…
Holder for dripping resin from the printing plate. The holder is for the Creality Halot R6 printer. Print settings: PETG Resolution: 0.20 mm Infill: 20% Support: YES ---------------------------------------------------------- Držák na…
Micheal Myers wall Decor Flat Back 4mm to 6mm thick 2 walls 15% infill no supports Find my complete Halloween Horror movie Sign collection at All the 3D models of thegreatgoogone・Cults (cults3d.com)
Of course inspiration comes from the infamous Drippy Bucket. Liked it so much I wanted to see what other objects could benefit from this beautiful concept! Low and behold my first attempt with the DRIPPY MUG. I made three different…
Skadis Drippy Bucket but modified not to require supports. It has a hook system that can be printed separately. Print 2 of the hooks. This just includes the bucket and the hooks. Refer to…
This is a slight remake of Chiquiruli 's beautifully-designed model . The only changes are: Addition of a hole to the arm, to allow for screwing in… … a printable screw, to secure the arm to the printer in a more stable fashion (in the…
Remix of Drippy Bucket, but without logo on bottom
This is dripper I designed for my hydroponics system. I use it with 10 cm (4 inch) rockwool cubes. External diameter is 7 cm. Printed in two parts: dripper and hose connector. Hose connector has to be glued to dripper. Holes has to be…
Here is a self watering planter insert for the Drippy Bucket from davemoneysign. The only thing you need is some cotton or tissue to put at the bottom of the planter. Can be printed with PLA without any support (with PETG I think it might…
Small dripper or sprinkler (depending on the pressure in tube) for Gardena micro-drip systems. Print Settings Printer: Alfawise U20 Rafts: No Supports: No Resolution: 0.1 Category: Outdoor & Garden
For its new printer, Anycubic Photon Mono 4 has developed a hanging device for the table so that the resin drips better into the tub. Please note that the table is not just tilted by 30 degrees, but it is tilted to the side by 4 degrees…
I designed an angled mount for the Form4 resin printer so the excess resin can drip back into the tank and isn't lost in the washing station. There are two files for printing with filament and the hollowed version for the resin printer.…
A remix of the insert of the round "drippy bucket". This one has different levels (heights) to cope with your stuff of different sizes. Six compartments with a height of (roughly) 10, 9, 8, 7, 5 and 3 cm.
I really like the design of this model, so I adapted it for my honeycomb storage wall. It has three connectors on the back, but for light stuff like brushes, the top two will do fine. Added a paint brush (sub) insert which fits in the…
Remix of the famous drippy bucket, changed de dimensions to make it more suitable for a toothbrush holder, also can be used as small pen container. Original model: https://www.prusaprinters.org/prints/73118-drippy-bucket Print setting…
Tall Drippy Bucket Piggy Bank with Screw on Lid. This prints best with a 0.4mm nozzle, up to 0.3mm layer height. The threads do not print well with a 0.6mm nozzle.
3D files for DRIPPUH - Drone Racing Innovation Platform for Precision Utilization and Handling
T-Stück für Tröpfchenbewässerung mit 1x6mm und 2x4mm Schlauchanschluss. T-piece for drip irrigation with 1x6mm and 2x4mm hose connection.
A simple water dripper for a stackable sphagnum moss pole. Sits in the inner diameter of the stacking part of the pole. Uses a series of small funnels to slowly feed water onto the top of the moss, which IDEALLY should allow the water to…
Keep your houseplants irrigated while you are away. Designed for simplicity and reliability, this model provides a steady water supply to your plants without complicated systems or expensive equipment. Simply fill it with water, insert it…
Allows you to hang the table at a 45-degree angle. This allows the resin to drip without your involvement.
watering your plants is easier than ever. with this bottle cap that goes into the ground next to your plant it can keep
Remix of the drippy pail. No Lugs and No logo
Different insert fit & smaller diameter version
This is another divider insert for davidmoneysign's fantastic Drippy Bucket model. It has the same dimensions as his original insert, as well as the inserts designed by SpeakingOfBrad. This divider features two main sections, plus a…
Hello, Today I have a Sponge Drainer for your dishes. It is convenient so that you don't have water everywhere. It is very nice and cute. Then the children will love the dishes! :-) I used PLA/PETG as the material. No need to use…
Remix of Flashhawks design however this one allows you to fit the case over the printer while it drip
I created these left and right corner pieces to align with the side border pieces from @OwLArt's border remix below: https://www.printables.com/model/434926-borders-for-honeycomb-storage-wall-smallest-size
Davemoneysign made the incredible drippy bucket. Robin made a remix with a screw top lid that is no longer available. I stretched the remix to make it taller. My daughter stores crayons in the drippy buckets. The screw top lid remix was…
The project was created as an educational aid for my students, so that they remember once and for all what colors are used for printing in offset printing.
I liked Printuin's drippy bucket remix for Ikea Skadis, but found the pegs were too snug to easily fit on my print. I very slightly trimmed the pegs and now it fits great.
This adapter solves the wiggling problem in the Origami Wooden Holder.
Holder for three brushes with space for dripping color. The entire drip space is lined with a raised trim that prevents further drainage in unwanted places. The holders themselves are equipped with a sloping surface for the least possible…
Collapsible V60 Coffee Dripper for taking your joy of brewing everywhere! Compact size yet still elegant design!
LiquiForm: The Snack/Dip Bowl transforms everyday serveware or a catchall tray into a striking piece of art. Designed to look like it’s frozen mid-melt, this bowl drips and oozes organically into smooth, rounded tendrils that pool at its…
This is a remix from my design of the Pusi Negotiator , but redesigned to fit the Sworksdesign Bottomless Dripper . Also included is a file for the Glass version of the Bottomless Dripper . Note on nomenclature: Pusi (푸시) is the Korean…
Be aware this stand may require some tuning/sanding before you get the final product. Printed parts: Holder (PLA is no recommended, PETG is fine for my first trial, but may eventually soften. I use ABS at the end) Base Knob (this is from…
Use a 3mm LED Print the flame with 0% infill and 0 bottom layersUse a 3mm LED Print the flame with 0% infill and 0 bottom layers
Coffee Dripper for Camping etc. Fits KWF-185 Coffee Filter by Kalita or similar. Dripper is printed in PP, handle in PETG. Fits Mugs with max. 100mm in diameter. uploaded Version has no Insignia in handle Print instructions Category:…
An auto-leveling holder for origami coffee dripper.
made some changes @ewr2san's original model (https://www.printables.com/model/5696-dripping-ooze) to get tw
Great for your Halloween decorations.. I use it for a Leaking Radioactive Barrel. Easy to scale up/down. Easy to bend with a heat gun for a rounded object. For glow under black light I use: "NOVAMAKER 3D Printer Filament - Yellow 1.75mm…
This is a remix of the lovely SKADIS Drippy Bucket by printuin (which originates from the Original Drippy Bucket by davemoneysign ) to accept the “universial hook” of CSD_Salzburg s IKEA SKADIS Universial Hook Set . To print you version…
The lid should have 98% diameter of the “drippy” part.
simple as, im using ASA but PLA will do just fine. Have fun. https://cults3d.com/en/3d-model/tool/anycubic-photon-mono-x-6ks-drain-dripper-plate-holder-anycubic Category: 3D Printer Accessories
The handles were a little big for my purpose so I made them a little smaller. Now it fits easier on the table.
Remix , Drippy Papierbox . passend zu Drippy Bucket . Innenmaße : 9,6x9,6 cm Höhe 9,8cm ohne Support gedruckt , Tropfen gedreht auf die Oberseite.
I needed a socket cover for my x399 system. I have modeled it myself, it fits perfectly on my tr4 socket. It should fit the same on the sp3 socket but dont have that to test. It may also fit the TRX40 but dont know. Printed on Bambulab…
This is a little dish that slides onto candles and makes them pretty much never drip. The .step and .stl files are dimensioned for a 20,30mm candle. .f3d files are fully parametric and editable using the Change Parameters function in…
Obligatory food safety warning. Use food safe filament + coating.
How to Use Line up the stencil's right edge to the right side of the filter, left point to the left edge of the crimped filter. Make a crease. With the stencil still in place, cut along the curved edge. Use'N'Brew
More than a year ago, I designed a Secret Box that can only be opened using centrifugal force. It gained many fans, even though it wasn't very easy to print. Today, I’m presenting a new version: easy to print and much more visually…
A perfectly spooky Halloween decoration to hold your candy or keys or the hearts of those that wronged you. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Paper holding inner part for V60 01 filters. For outer shield use files from original project.
This is an interface plate for the Origami S Dripper to stop it's incessant wobbling with the Wooden plate. I'd advise printing in a food-safe high-temp filament since the outside of the brewer can get quite toasty during brewing and…
Coffee Dripper Stand with Asanoha Pad A compact pour-over station designed for V60, Hario, and other standard drippers . The elevated platform supports the dripper while keeping the carafe directly underneath, ensuring a clean and steady…
The screw holes can easily be marked on the wall with, for example, a pencil. A level can be placed on the edge of the template or you can simply use your phone as a level
To connect a hose; first heat up some water in a small mug and place the end of the tube you want to connect in the mug (this is to soften the hose to make it easier to slip on.) Apply some petrolium jelly (vaseline) to the connector then…
Blank insert for the square drippy pail if no dividers are desired.
I wanted a lid for my Drippy Bucket so I made one! The bucket and handle are printed separately and glued together. I printed the lid and handle at the same time at 0.2mm using Neon Green PLA from EasyPrint it took just short of 8h on my…
![[REMIX] Drippy Flip-Top Bin](https://media.printables.com/media/prints/609966/images/4848897_0fda6b34-abb8-4201-af3b-21725af2ffd1_398a9720-442d-4da9-bd5c-9711d1ce655e/img-0.jpg)
