329 models
We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon and tie interceptor kit cards, a coworker suggested I try a landspeeder. This was made to fit together when printed on my…
The speaker enclosure has a volume of 4.5 liters and is tuned to 60 Hz. It features a triangular port design, eliminating the need for support structures during printing. Crossover: I designed my own crossover based on online…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Klebebandspender mit Fixierung an der Werkbank. Für schmale und breite Klebebandspender
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
LCM Nearfield monitor speaker This is a near field mini-monitor, designed for excellent bass response, and intended for use at a desk or console. They are suitable for desktop, shelf, or wall mounting and optimized for small to medium…
Klebebandspender mit Fixierung an der Werkbank. Für schmale und breite Klebebandspender Jetzt mit Update von Maiwen Rocher @MaiwenRocher_1610011
It's easy to print, with brim and without supports. I recommend a 0.2mm layer height.
Diese 3D-druckbare Kinderschaufel ist perfekt für kleine Abenteurer, die im Sandkasten, am Strand oder im Garten spielen möchten. Sie ist speziell für Kinderhände konzipiert und bietet eine sichere, ergonomische Form, die leicht zu…
An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…
This is our 3rd speaker design to date. We went way off-script with this loudspeaker, hoping to attract those with smaller build volumes and a desire for deep bass and excellent off-axis response. They pack the party animal of the FDM5's…
Developed in the summer of 2023, these 3D printed bookshelf speakers are our first attempt at properly meshing 3D printing and audio. We believe that we hit the mark! FDM5 Loudspeakers throw out an impressively wide soundstage and boast a…
More designs for building with 2020 extrusion A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I designed it for introducing odd angles into 2020…
Fun outdoor windmill remixed from mobiobi's Airbus H145 Helicopter and modified with parts from PRINTER's windmills ( Windmill and Windmill XL ). It is an easy print (don't be intimidated by the number of parts) that needs no supports or…
LEGO Star Wars Landspeeder
I wanted some larger toolheads for my new DSPIAE sander and came up with this initial set. These work very well for me and are a nice start at developing a more complete toolhead set than provided by the manufacturer of this neat little…
EN : The money clip can also be used as a staple in the office or wherever you want to stick something together easily. Slicing is best with 0.1 or 0.15, but 0.2mm is also possible I have used 0.15 in the existing gcode files. In…
Ein kleiner Erdspiess zur Gartenschlauchfuehrung in drei unterschiedlichen Groessen: 13 mm 19 mm 25 mm Die Modelle sind fuer den Druck bereits ausgerichtet, vorzugsweise ist PETG zu verwenden. Print Settings Printer Brand: Anycubic…
This container will fit the entire Dspiae sanding sponge set with enough depth to stack the containers if you have two sets. There's also a little room for some of those extra Godhand sanding sponges you have laying around. :)
Tower to easier identify spires. Holds lowest chip. Additional chips stack on top. Holder for market items. Ring to slightly lift chip-counters in mats for easier rotation. Half the thickness of the mats.
This is a very crude and simple design meant to hold additional head sets for the DSPIAE reciprocating electric sander tool. The case the tool comes with has space for the initial 8 heads, but as someone who uses multiple grits in each…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This design holds the MiniDSP UMIK-1 (or similar microphone) about ear level at the headrest. It utilizes the holder and tripod that comes with the mic to hold it in place. Simply place the tripod through the hole and open the legs out to…
Erdspieß für Unkrautvlies 12cm lang, gedruckt in PETG. ca. 4,5 g pro Spieß -------------------- Ground spike for weed fleece 12cm long, printed in PETG. approx. 4.5 g per spike
Thats a Holder for a Solar Lamp. The diameter is 24,5 mm, length overall is about 125 mm. Print with PETG and 100% infill, Nozzle 0,4, layer high 0,2 with support. Dieser Erdspieß ist für diverse Solar Leuchten. Der Durchmesser beträgt…
Requires 3 bearings like those in picture, been playing around and maybe see if I can make my own windpower :)
Adapter for Eryone card spool to work in Bambu Lab AMS
Made this model so that the new filament spools that come on cardboard spools roll off better of the spool holder. Outer Diameter is 53 mm so it fits the standard cardboardspool. (Tested with Jayo and eSun cardboardspool) Inner diameter…
(Update 1/8/23: Added adapter for Wondom JAB 5 and Dayton Audio KABD-4100 4x100W amplifiers.) This is an amplifier enclosure intended for the Dayton DSPB / KAB series of Class D amplifiers also sold under the brand Sure Electronics…
Minimal remix of the ground hook by 3D_Onkel. Remodeled to be printed flat for optimal orientation of the layer lines against expected forces. Uses less than 50% of the original material. Safely anchors to the ground due to rehooks.…
Update 26/05/24: Made the slot where the caliper goes a bit wider to fit a wider range of calipers, and also made the overall measuring length 1.00inch. Update 22/05/24: Now updated with space for a nut so you can tighten it to the…
osVAC neo M32 adapter for Makita DSP600ZJ The adapter is clamped by means of a screw (M3x10) and nut (M3). This allows the adapter to be mounted and dismounted very quickly and easily. Since the machine with mounted osVAC adapter does not…
Hi, this is my first time on Printables (please be kind). I wanted to make a groundspike cover - or washing line hole cover for my Dad, who either lost his or never got one. This one is for a diameter of 45mm, and modelled on my OEM one.…
This is a drop-in replacement for the original dust nozzle. You need to transfer the original o-ring to the new adapter. I advise to print the adapter with the C35 side facing downwards. It is possible, that this adapter also works with…
Look ma, no overhangs! I love the original model, but it was missing a few design elements which make printing a lot easier - so here's my take! All STL files require no supports, and are pre-orientateded. Highly recommend turning on…
a 4 x 1 Gridfinity Tray to hold my DSPIAE Sander and sanding bits. Might need to adjust the cable holder a little but it works.
Folgendes wird zusätzlich zu den Druckteilen benötigt: 2x M3 Gewindeeinsätze (ruthex) 2x M3x15 Zylinderkopfschrauben (zu finden in den Spareparts vom Bausatz der Prusa-Drucker) 2x Gewichte (ich habe hier im Leitwerk Taschen für Gewichte…
Audi grandsphere concept car modeled for low poly competition.
I struggled finding a simple adapter for the exact combo of Makita LXT tools I have. None of the ones I found are fitting. I recommend this as a simple CAD excercise, since it is simple and basic shapes. But in case you cant be bothered,…
⚡ Dummy 13 – Godspeed (Flash Villain Edition) Unleash velocity and vengeance with this Godspeed-inspired Dummy 13 , a custom remix honoring one of the most striking speedster villains in the Flash universe. Featuring a sleek…
Be sure to leave a make and “like” my design! :D MiniDSP 2x4HD, loved by audio enthusiasts for calibrating many subwoofers or having active crossovers for their HiFi setup. Unfortunately, it's connection layout and light weight make it…
I liked the Original by @ParentalDisappointment on thingiverse, that I found on reddit, but i wouldn't hold my DSPIAE soft tipped markers. I also wanted it to hold the cotton bud boxes I made for panel lining and decals. So I modified it…
Ein einfacher kurzer Erdspieß für den Garten. Wir haben unsere Bohnenranken damit befestigt!
I wanted a quick printed spindle whorl for plying up a lot of yarn at once, so I designed this. It prints up well, needs minimal finishing before use and spins like a dream. These print flat side down so I recommend a removable flex bed…
print last layer in contrasting color 0.20mm layer height or smaller 0.40mm nozzle or smaller Category: Toy & Game Accessories
I wanted my Luke's Landspeeder set to be at a 45º angle and didn't want to dig through Lego bins to rebuild the stand so I just threw together this little piece to slip in between the model and the stand. Depending on how you place it on…
printed in pla, coloring is happend in prusa slicer;
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Hello guys, I wanted to store my sanding tools in an organized way in my modelling table, with this simple tool holder I can easily select the grade. It is designed for DSPIE self adhesive sanding sponge tools, therefore the holes are…
A model of a Neogi Mindspider Selljammer from Dungeons and Dragons. This model was designed for a commission. The original rules and floor plan for the Mindspider can be found in the Spelljammer Adventures in Space Box Set which can be…
These canning headspace / debubbler come with two steps, one at 10mm and the second at 20. Two different provided lengths 150 and 200 for larger cans / jars.
Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the…
Den Erdspieß zur Schlauchfixierung meiner Tropfbewässerung habe ich konstruiert, da die mitgelieferten Originale zu kurz sind und deshalb nicht stabil genug in der Erde halten. Außerdem benötigte ich weitere Exemplare, da die vorhandenen…
Dies ist ein kleines, stabiles und coqoles Windspiel was ich selber gemacht habe.
Windspiel Weihnachtsstern drehbar Die Fusion360 Konstruktion finde ich ganz elegant gelungen, daher hänge ich die Datei an. Category: Decor
This subwoofer features a large triangular port, a hallmark of most of my designs. Its generous volume and dual drivers, which operate mechanically in parallel, allow it to achieve a low-end extension down to 45Hz and even lower, perfect…
Two Gridfinity-compatible holders for the DSPIAE ES-A USB-powered reciprocating sander pen body in a 4×1 module and its interchangeable sanding heads in a 1×1 module, each standing two units tall.
UPDATE 1: added antenna holder version Proud to present you a case for Malahit DSP3 radio. There is 2 variants: with or without antenna holder. It have 2 versions: left or right speaker. It fits tight, no wobbling. You will need 8 inserts…
Nobody needs this. You don't need a Trove Chest to store all of your Cloudspire components. But if you did decide to store your Cloudspire + all expansions, miniatures volume 1&2, hardcover books, promo chips, and premium health into a…
This is a remix of the Malahit Radio Stand, by Mic, which was made for the Malahit DSP1 radio. This model has been scaled up to fit the Malahit DSP2 radio. I printed this on my AnkerMake M5, but it should work well for any properly sized…
This insert holds all of the released cloudspire content, up to and including harbinger (with some minor caveats) in the main game box. The main one being that it doesn't fit any books - those will need to be stored externally. Some parts…
I made a simple wall holder for the Makita DSP600 Battery Tracksaw. It uses a hole in the base of the along its track groove. After printing, I'd recommend using PETG for additional layer strength because of its optimal print orientation.…
This file is for the Xshot Hawkeye blaster. The file is to fill in the deadspace of the Xshot Hawkeye plunger.
Two box , one can carry Arduino/uno / leonardo or smaller board ( it's exatly a leonardo that i use in my icpmax) and the display. A smaller second to box display SSD1322 solo, so you remote where you prefer the screen (like upper ICP)…
DSpi The DSpi is a Dual Screen Linux handheld powered by a Rasberry Pi Compute Module 5, designed primarily for DS emulation. The device features a 5000mah amp battery, Xbox pattern controller with dual analog sticks, Dual 480p DSI…
The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…
For German description, see below / Deutsche Beschreibung siehe unten. ------------------------------------------------------------------------------------------------------------ CONVEX MIRROR AVAILABLE! | KONVEXER SPIEGEL VERFÜGBAR!…
An easy to print tower for use in the game Cloudspire.
This is a full range speaker for the Dayton Audio RS100-4 chassis from their reference range, popular due to low distortion and linearity. Sound pressure level is in the lower range with 83dBA, but the Re of 4 Ohm makes it easier for the…
This great sub-sat system requires a print area of 200x200mm for the subwoofer, and slightly less for the satellites. These use sealed speaker modules from Tang Band; the full range T1-2121SD in the satellites, and the T2-2181SA subwoofer…
This 3DW osVAC Adapter for Makita DSP600 replaces the original hose connector. You must transfer the o-ring of the original adapter to this osvac adapter. Lubricate the adapter with a little grease and insert it. In the pictures you can…
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Das Original ist bei einem Fahrradsturz gebrochen. Druck in PETG mit 100% Infill. Model flach auf der Druckplatte mit Support drucken, dann ergibt sich die maximale Festigkeit.
I wanted another design for my printable spindle whorls. Like the originals, these print flat side down so I recommend a removable flex bed surface if possible. The files are now titled by size/shaft size. These models are both sized for…
This is a dual 3" loudspeaker satellite, originally designed for FaitalPro 3FE22, 3FE25 should also fit, but not tested. Other may work as well. Print all main parts once except FrontFlange and FrontFrameBase, you will need two of those.…
Der Ständer ist so konstruiert, dass der Malahit DSP straff im Gehäuse sitzt. Der Resonanzkörper verbessert den Klang. Ich empfehle hierfür 3 Wandlinien und 15% Infill. Zum Drucken eignen sich PLA, PETG und natürlich auch andere Filamente…
With the help of this tool you can split ropes to connect, form a circle or set an end. Since the original tool that is made out of metal and wood cost me 10€ and i wanted to train kids i decided to malke a bunch of them. It is possible…
A custom insert for DSPIAE's nipper storage case to fit Tamiya's single bladed nippers. While this is modelled for the specific pair of Tamiya nippers I have, please check out the OnShape document for the measurements of the insert if you…
The Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
Rahmen um einen Lautsprecher mit Abstand unter dem Armaturenbrett zu montieren (wenn z.B. die Hochtöner etwas überstehen
Honeycomb wall holder for Dspiae - grinding machine
Adapter für Tonbandspulen von Tonbandmaschinen von der dünnen Achse auf NAB Spulenkerne. …………………… Adapter for tape reels of tape machines from the thin axle to NAB reel cores.
These racks fit headspace vials. one version is just for the headspace vials, the other holds your calibrator vials too Category: Other
Round recessed speaker terminals with spring tensioned quick connect wire terminals.
One picture showes a first version. Second version is better. see other pic.
Print in a UV resistant material. PETG works fine. Mount. Enjoy.
My kids have a Radio Flyer Landspeed that I made a little faster. On the maiden voyage, my 4yr old drove it right into a curb in the neighborhood which immediately sheared half the teeth off of the pinion gear in the right side…
This is a 2x4x6 Gridfinity tray to hold an Electric Grinding / Sander / Polisher pen. basically I utilized the design made by TM and made some adjustments by changing some internal dimensions and added 8x Slots for some Sponge Sanding…
Quick set of headspace gauges. go is 0.065, no-go is 0.071, field gauge is 0.076 I used these and was fine, however use at your own risk. Adjust scaling as required to meet these measurements from your printer.
Just an easy to print model with snap fits for the usb and psu module.
Addon to the following model: “ Door Stop Stopper dead flattened guy ” by “ patrykza @patrykza_591446 ” https://www.printables.com/de/model/620255-door-stop-stopper-dead-flattened-guy Motivation: For larger door gaps and hard floor…
A headphone measurement rig built around the minidsp umik1. If you make different baffle insert for it, it will probably also work for there mics.
If you love Avatar The Last Airbender this model is for you. On a windy day, it looks like Aang is riding on a swirling air sphere. Just like he rides on his air scooter. The design combines a character sculpture and kinetic motion: the…
Kern für Tonbandspulen von Tonbandmaschinen als Ersatzteil …………………….. core for tape reels of tape recorders as sparepart
The Markaudio Pluvia 7.2 HD is arguably one of the best 4" full range speakers out there where you can get away without a crossover or notch filter. See one of the reviews . There are multiple suggestions for enclosures on the Markaudio…
Die Spitze dient dazu ein Alurohr mit 25 mm Außendurchmesser in die Erde zu treiben, ohne das sich das Rohr mit Erde füllt. Das Alurohr ist eine Halterung für eine Glaskugel mit Stiel. The tip is used to drive an aluminum tube with 25 mm…
Case for DSPIAE ES-P. Not tested yet. For assembly needed: x4 6x3 magnets x2 M2x18 screws
These are models of the actual ones used in the RCBS Headspace Gauge. I used these for design verification.
Vhorlath Realms – Season II: Shadowed Empires The Hellspire Wardspear is an armored demon sentinel shaped for grim fantasy settings, infernal strongholds, cursed gates, and shadowed halls where only the most imposing guardians are allowed…
Lynx Corporation logo from Hardspace: Shipbreaker . The game has just left early access so thought I would make myself some merch to celebrate. Easy print with a colour change at layer 118 (6.05 mm).
