Counting matching models…
Dummy 13 has won 3D Model of the Year! Thank you so much to the judges and everyone who voted. TL;DR This is Dummy 13, a printable action figure. It was a work in progress for a while and now this is the finished product. It's still a…
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Remix Dummy 13 Weapons Pack Version ORIGINAL: https://www.printables.com/model/681425-dummy-13-weapons-pack-version-20
Prints better when it's right side up with a little support on those bridging areas (the details should be fine when left alone). Standard printing setups, tree support works well with it. Works for 100%, but looks better on 200%
These are remixed posable hands for Easy 13. I used designs from 2 other models to create an updated file for Easy 13. The smaller the hands the less chance the design will function as it should. Print at 200% or higher for better…
This Santa hat will put you in the Christmas spirit and brighten up the look of your Dummy 13. I recommend printing with supports to get the best print quality. Merry Christmas!
Version 2 improves on my original locking stand in several ways. Much more freedom of movement with 15 degree increments of movement, as opposed to the 45 degree increments of V1. More sturdy locking mechanism with very little sag. No…
I tried to make a Horse based on the frame system of Dummy13. I used a horse skeleton as a base and reproduced all limbs and joints. The neck seems to be too small (as you can see in one of the pictures the horse can't reach the ground to…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
An upgrade for Dummy 13 Warhammer armor Use this armor for the rest of it https://www.printables.com/model/1049018-beta-
this is a remix from this: https://makerworld.com/en/models/463132?designId=463132#profileId-371619 I finally decide to remix a deadpool head so to use it my dummies. I was testing all the heads out there but seems to be compatible with…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
The scale is the same as the original model (100%). Feel free to resize it to fit the scale of your model;)
aqui dejo esta ebike maqueta valida para los dummy ,se le puede poner una goma elastica que ara de cadena..la suspension por el interior son pequeños muelles que se pueden conseguir de un boligrafo…son piezas delicadas y chica ..segun…
Not satisfied with the retention of snap connection with ankle joint, I designed my own, slightly different from the original Armor foot Central wheel a bit hard to assemble: just push and it will slip in position Printed in PETG at 150%…
Simple hook remix to fit the Dummy 13 accessory pin. Allows for a good spot to store/display all your dummy13 color/combinations.
Designed from scratch in tinkercad using measurements taken from the FakeTec board I built. It's at least mm-accurate.
its mp5-sd for DUMMY 13 print with support
Printed at .05mm with MMU3 - Extruder#1: black, Extruder#2: white, Extruder#3: red with custom supports. The .3mf and .bgcode files make three of them.
The source marked this model as adult content.
7 Cylinder Radial Engine Dummy Reproduction of a 7-cylinder radial engine for installation in an RC model aircraft. The hole in the center where the electric motor looks through is 50/60/70 and 80mm in diameter. The rings are different.…
25. Aug. 2024, V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Someone on MakerWorld kindly asked me to design some cheerleader stuff as her…
hit the like button if you downloaded it, so i can get the prusa meter , thanks The Dummy 13 use 2 x 4 grid of Gridfinity If you already had box 2 x 4, then you can only use the dummy shape and glue it to your existing box.
Just a battle-axe for dummy 13. No supports needed.
A bow and arrow for Dummy 13. No supports needed.
Extra arms for Dummy 13. Supports recommended.
Too meny empty slots on my HSW and a sad dummy without his place. So I decided to combine these two cool products into one simple mount. You can add any other fasteners here that will allow you to place your dummy in the funny position.…
This is a remix of the keychain https://www.printables.com/model/615893-dumbbell-keychain by Erika Heidi (@erikaheidi)
If you recognize the axe of Grulba Deathwind, good job. If not, read the redwall series and it is in book, 19 I think.
mini dumbell with custom name first thread try
This is another piece of Dummy minifigure equipment: Heavy Duty Shield, uploaded at another user's request. I actually found it too heavy before and only made a sample, but I'm happy to upload the complete model since there's demand! No…
A Playdate dummy used for prototyping accessories and mods, and to get a feel of the size of the console. The main idea was to have a 3D printed version as close to the real device as possible. It uses real M3x6mm fasteners (screws) to…
Alexandre Dumas – Buste 🇫🇷 Description (Français) Ce buste représente Alexandre Dumas , figure majeure de la littérature française du XIXᵉ siècle, auteur de romans devenus universels tels que Les Trois Mousquetaires et Le Comte de…
An AR I drew quickly and turned into 3d with Blender. Inspired by Gundam. Print it upside down please.
I made a few signs to put in @MatthewBogner Dumpster. I also made 2 end pieces so it’s a little easier to use filament for the hinges. https://www.printables.com/model/696382-desktop-dumpster I’m looking forward to seeing what other names…
This training dummy is a 3D printable prop designed specifically for dioramas, miniature environments, and tabletop scenes . Inspired by classic wooden training dummies, it works perfectly in training yards, fantasy scenes, dojo settings,…
flame armor for your dummy 13!
I made this because i needed to have some reference when designing mount for it. Tinkercad
I needed a model of the voltage converter I plan on putting a couple of in the new case I'm designing for my SKR3 EZ mainboard that I'm going to use to upgrade my LK5 Pro so I could check clearances and create mounting points for them. I…
York makes a dumbbell rack that has plastic supports for the handles. Over time they split. While they sell replacements, they are as thin as the original. So why not print beefy replacements. :-) These will fit the York dumbbell rack you…
Replacement battery cover for DumboRC DDF-350 Transmitter.
I'm big fan of Dummy 13. I usually print it in 150% for my sons and their friends. I wanted to print “parts on runner” version on my A1 Mini in 150% and faced size issues. It just bigger. So, i've modified runner to fit A1/Prusa Mini…
The MP7 is a compact submachine gun used for personal defense. This model is compatible with my modular accesories. For best results print with either .2 or .1 layer hight. PLA and PETG work well.
This listing is my entry in the flash-contest “Single Extruder - Dual Color” . If you download this please help me in this contest my giving this like & perhaps even “make”-picture. /Cheers! Originally I made this in swedish (hence the…
this model adds horns fo dummy 13 if youre asking why i didnt print it, i was already printing something
Since “that one cat” removed the Dummy Thick leg set from the site, I've used the backup of the files I have to recreate them, smoother, with better finish, and fit for the new 1.0 update. Since A LOT of people asked me for the old files,…
This model takes the original K9 head and slots a hole to fit standard Dummy 13 accessories in the “mouth”. Prints without supports. Print flat on the “top” of the head (i.e. the side with the ears). The 3MF is laid out correctly.
use low infill if possible on this, the broom end can get heavy for the default stand. print with supports.
hit the like button if you downloaded it, so i can get the prusa meter , thanks The Dummy 13 use 2 x 4 grid of Gridfinity If you already had box 2 x 4, then you can only use the dummy shape and glue it to your existing box.
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
Tvman Head for dummy 13 v1.0 (Beta) The size corresponds to a dummy 13 scaled to 120%
This is a basic Épée Fencing Sword compatible with “Dummy 13 Version 1.0”. Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. This is a simple cinder block for Dummy 13. It is not designed as an…
No ride is complete without a pair of fuzzy dice suspended from the rearview mirror. So when I made Mici's Artemis Lunar Rover for Dummy 13 , I had to add some. These dice of course could be used for other vehicles, or even on their own…
A remix of 808Asher's design, with an added loop so it can be hung on a holiday tree. Filaments Used: Beldum Regular: Blue: Amolen Force Blue https://a.co/d/1jwwYpt Silver: eSun Silver https://a.co/d/eDj1yCb Beldum Shiny: Silver: eSun…
This Santa hat that fits snuggly on the Dummy 13 head. I included files for the smooth version and the fuzzy one. I remixed this because I could not find a suitable hat for my Dummy-Elf on the Shelf. I put the color changes at 28 and 124…
**Bend the joint 45 degrees as soon as you take it off of the baseplate, or use a heat gun afterwards. ** This is a dummy 13 computer. When you print it, your dummy will start learning how to work, and maybe start binge watching all it's…
Dummy 13 needed it's own phone to take selfies of it's poses. You'll want to use Tree supports for the hand. Clean them out and a very light brush with a file might be needed. Then the phone should slide right into place. All print…
blade arms or blade elbows for dummy 13 , for blade elboy you need to cut the defaul elbow in the arm and attach the blade to the arm , then push it until it clicks in place. there is an image so you can see better
This Santa hat will put you in the Christmas spirit and brighten up the look of your Dummy 13. I recommend printing with supports to get the best print quality. Merry Christmas!
Welcome Light up your next adventure with the LightCore Ranger , a remix of Dummy 13 ! New features include mounts for 5mm LEDs in the forearms and head, and a backpack that stores a coin cell battery. Follow the same assembly and…
! I threw this together in like 5 minutes, do not be surprised if it does not assemble correctly ! For assembly instructions, just follow the normal Dummy 13 assembly guides, of course print 2 extra arms but no major changes for assembly.…
PLA Matte but PETG would be a better material for a longer life .08 layer height 15% infill 3 walls The interface part is for a 150% Dummy 13
I designed this to make dry-fire practice safer by creating a habit of not using actual magazines. The reasoning is you don't subconsciously load live ammo if you're complacent. It fits snugly and matches the endplate of the CZ mags. Wall…
I needed a marker to remind myself that an M.2 slot on the used mother board I have is dead. So I modified a preexisting model to print properly without supports in FDM printing. There are two models. One is blank for use as a dummy or to…
This was sort of inspired by the terminator T-1000 from Terminator Judgement Day, and Bumblebees knife hands from Transformers 1. For print settings: I would recommend a .08mm layer height (or however fine your printer can handle). Yes…
I used the “Staff” model from the accessories to make it, a pretty simple flashlight to illuminate the Dummy 13 halls.
7 Cylinder Radial Engine Dummy Reproduction of a 7-cylinder radial engine for installation in an RC model aircraft. The hole in the center where the electric motor looks through is 50/60/70 and 80mm in diameter. The rings are different.…
A comfy maybe bit cursed chair Print it with whatever you like, i printed it myself with PLA. You need to resize the model to 60% in order to fit to the normal size of the Dummy 13. You can also of course change the size as you like.…
Just a variant from soozafone's feminine torso, without the numbers, I couldn't find one so I made it
I modified the model in order to make it printable without supports, at the cost of some detail.
Racing helmet for your Dummy 13 figurine. Inspired by The STIG from Top Gear. Visor is printed separately and glued onto the main helmet. Helmet slips onto original dummy 13 head. IMPORTANT NOTE: This helmet size is designed to fit 150%…
I’ve created a remix of the Dummy 13, transforming it into a Mighty Morphin Power Ranger! The model is organized with pieces separated into folders by color for easier printing. It includes both a free-supported version and a 2-piece…
A simplified model, with the height of the main elements for a tight fit in the canopy
Display stand for 250% Dummy 13 for posing in swimming or flying position.
The scale is the same as the original model (100%). Feel free to resize it to fit the scale of your model;)
It is compatible with lego.👍 Oh, and thanks to athan.cz for the picture.
The DUMB Wallet – D esigned U sing M inimal B ullshit It’s stupid simple. Like, really stupid... No sliders, no screws, no elastics, no levers and shit—just exactly what it needs to be. It holds your cards. It holds them really well. But…
The DUMB Wallet – HEX Edition ( D esigned U sing M inimal B ullshit, Now With Extra Grip & Drip) The original DUMB Wallet was already stupid simple. This one? Still stupid, but sexier. The kind of thing you'd leave on your desk just to…
Just print with brim. Maybe have a color switch here or there.
![flame thorwer bot (dummy 13 version!) (elements series) [a dummy 13 remix]](https://media.printables.com/media/prints/67676aeb-6f6c-4c3a-a408-2f90e0caeb25/images/11210412_827b7d09-a329-4ca1-8f49-4d3a2b94782b_aae5ec0b-2855-4d2c-87b7-fd6139556f48/screenshot-2025-11-20-123835.png)
