Counting matching models…
This is a reconstruction/remix from the original one that you can find on thingiverse here . Please, for any issues contact me or leave a comment, I will replay as soon as possible!
Size: 10cm x 10cm x 7,7cm To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D
The Rocktopus is one of the funniest 3d models I've ever printed. NO SUPPORTS NEEDED Might want to use a brim or raft for better bed adhesion. I just used slower first layer speeds and it printed fine. This is an original design by the…
This is a lego model of Dwayne Johnson, I have not yet had the chance to print it as my printer may not be able to print the detail in proper minifig scale (the model should be to scale at 100%) so pls comment if it works!
This is a reconstruction/remix from the original one that you can find on thingiverse here .
This OctoOctoRocktopus has 57 heads or should I say Pentacontaheptagon . This is a masterpiece. DOWNLOAD NOW! Print large since heads become very small.
This is the head of a man who goes by many names, and with this model you can create a Dwayne Johnson of your own and add to his list of nicknames This model isn't a great print by itself to be honest, but it is very easily modifiable
Statue of Dr. Smolder Bravestone / Dwayne (The Rock) Johnson from Jumanji: Welcome to the Jungle. I tried to capture every detail and that's why it's probably my shortest project in one piece. Specially designed for the Prusaprinters…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
print and then screw into base leaving a gap between the head of screw and Dwaynos head, make sure the screw head is just slightly larger than the hole in the crocs, push the screw through the hole and TADA Dwayne the Croc Johnson
Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.
Bust of Dr. Bravestone - Dunson Johnson I made two bases No. 1 is ordinary and No. 2 is a bit decorated ;) Print instructions The bases are printable without supports For the bust, I recommend earbuds, but they are probably not necessary
Dr Smolder - Glasses Holder (or just his head as sculpture) If you like it --> press like it :-) I remixed the model Dr. Smolder Bravestone - Dwayne Johnson which was designed by 14JS-studio . There are two variants, one which is only the…
Layer height: 0.2 Infil: 20% No supports
Dwayne The Duck Johnson print with supports
Meet Drock, a crossover between the Rock's head and the famous print in place dragon. I remixed the files in Meshmixer and the result is seen as here. I have printed it succesfully on my ender 3 and printed it with a brim since i wasnt…
See 3D Printy's Printer Bobbleheads for additional parts and more information. The head is used from JS-studio's incredible sculpt .
Simple, "classic" speedway motorcycle wall decoration. The gcodes are for 0.6mm nozzle. Stl/3mf may be added later.
Now we finally know what Master Chief looks like under that helmet. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.1mm Infill: 10% Filament: Polymaker PLA Matte Grey
Edited the Rocks head on to a croc jibbitz base.
No reason at all. None. I picked the egg because it had a nice chin & nostrils for vase mode.
A beautiful snake with the rocks head on it.
printed with 0.2mm height and 20% infil
An extruder knob for the Ender 3 style printers out there. Use supports under the chin.
Print Dwayne at any scale you need (mine was 75%) and enjoy his plant-growing abilities. Print Settings: Resolution: .15mm Infill: 15% Supports: No Rafts: No Material: PLA Printed on: Creality CR-10 Note: I was unaware of this, but…
With PLA you can only expect about 60°c before it starts softening. I would now personally recommend ASA, because it can handle 100° before softening. Update With the success of the model I decided to spend a little time and make the…
Remix of Dr. Smolder Bravestone Support Free Remix by robin3dverse. Removed the Jumanji logo at the front. Dr. Smolder is now The Rock! Please LIKE if you found this useful Category: Sculptures
Midway Gardens (1914-1929) was a concert venue in Chicago, Illinois designed by Frank Lloyd Wright. This sculpture was a collaboration between Wright and Italian-American sculptor Alfonso Ianelli. This is one of several different…
An emergency whistle with the rock's head on it WARNING - VERY LOUD! whistle is from https://www.thingiverse.com/thing:3130078 if you made one then please post a make. 4/25/22 fixed open edges 5/8/22 added Big version that has slightly…
Print a multi-colored design with a single extruder and show spirit toward your favorite professional football team! The colors are at all different layers so you can color-change while printing. Layer height should be 0.20mm (or under)…
YaHoOoOoOoOoOoOoOoOoOoOoOoOoOo
Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Dwayne "The Aglet" Johnson, put him on over your Aglet
Not my model all credit to original designer Just split parts as requested
A very nice speedway rider. Supports required. Recommended layer height: 0.1. Recommended infill: minimum 10%. Best printed with resin, although not required. Powered by Image-to-3D from MakerWorld…
These directons are straight from Eastman's original model for this figure: The body Now, the body part leans quite heavily, so put nice wide brim on it to keep it in place, and if it makes you feel safer put some supports down as well.…
A The Rock toothpaste cap
The Rock? A Christmas Ornament? So I wanted to try out Meshmixer for the first time and thought this would be a good start. This is 'Little Mitch' from Baywatch 2017, whilst the actual film was, erm. Yes. This little character addition…
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
Laguna Seca Speedway, Monterey, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Another year, another Easter bunny with The Rock's head! This time, with a woven baket to hold whatever you see fit. I have also included the model without the basket, this one might need supports for the paws. And in case you prefer…
This is a small 100mm statue of dwayne the rook
Dwayne “The Rock” Johnson Necklace / Ornament. This is a remix of the original here . Please leave a like and post your makes!
All credits for the original (amazing) venus model from Venus de Milo by CosmoWenman Something fun and elegant(?) to print for your personal art gallery. Printed with Filament : Marble PLA Infill : 7% Gyroid (Check the original venus…
custom LiFePO4 battery based on headway 38120 HP cells .Cells are 8AH with 200A discharge rating .Be extra careful while handling those cells . I got the cells and bus bars from batteryhookup.com . nominal cell voltage is 3.2V , 4 cells…
A Ring that is approximately 0.85 Inch opening made in the Dwayne style
Daytona International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Print slightly bigger if you are aiming to get the print quality very good.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Who else would be a better star then Dwayne Johnson? Let him smolder Santa. Rock Bottom the Elf on the Shelf. I created two versions; One version is one whole print. The second version is split along the Z-Axis, with a plus-shaped key, so…
Regirock STL came from https://www.thingiverse.com/thing:3019610/files
Yet another fabulous rendition of The Rock for you to enjoy
just do anything it doesn't matter and it takes roughly 7 hours but you can scale it down
Another magnificent rendition of The Rock for you to enjoy
“Welcome aboard the aero-Dwayne.” “We have direct flights to Johnsonville.” "Do you smell what the rock is cooking?''
This is a snap-fit 2-part frame designed for hanging theater playbills. It is sized for NY Broadway playbills, taking into account small variations between the 9 I had on hand. I'm not sure if this size is common internationally, but…
Polygon owl with dwayne the rock johnson head
nothing much to explain.. oh god…
Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
I got bored one day so I made this :)
Studies have shown that owning a Rinker increases brain function and overall productivity by up to 5000%* *participants may or may not have ingested lethal amounts of RedBull beforehand
Ever wanted your thumb to be the ultimate wrestler? Well now you can with Dwayne “The Thumb” Johnson! Be the envy of all your friends with this amazing thumb puppet!
Dwayne “The Rock” Johnson as a cat
The full Macrotrack Oval Speedway spans (approx.) 132 cm [4.3 ft] in width and 89cm [2.9 ft] in depth - featuring a 3 m [9.8 ft] long smooth, engineered track surface along with a press fit, numbered connection scheme that allows for easy…
The Rock, in this wild adventure, is now a cat… with a disturbingly human-looking head. I got bored and thought, hey, why not combine two designs?
Road America Circuit ,Elkhart Lake, Wisconsin, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Perfect Gag gift for Christmas
Masarykův Okruh, Brno, Czech Republic, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
[5/16/25] UPDATE: Full version now free for all. This post will be left up for now, but just go download it here: https://www.printables.com/model/1012395-macrotrack-oval-speedway-miniature The full Macrotrack Oval Speedway spans…
Printed with supports and 0.1mm layer height for leg strenght
I didn't have the original part that broke off so it is different but I think it works the same. It can be closed and used as a hot wheels “briefcase” again :) Print the model laying on one of the sides. I printed it in PETG (btw.…
The Rock, as a block. Hurl it at your enemies, bring it to brunch, give it to your children as a present.
Tête de The Rock/Dwayne Johnson sur un socle.
I'd love to see your prints. Please post a pic of your makes. Category: Sculptures
Fuji International Speedway, Oyama, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Brands Hatch, Fawkham, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
i don't even know, he's the grockfinity
A heart with Dwayne the rock Johnson's head on it
Tsukuba Circuit, Shimotsuma, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Indianapolis International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Inspired by my coworker when he saw my Rocktopus I have on my desk when he said, “It'd be cooler if it was Dwayne ”The Croc" Johnson."
Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
A cool chain that can go around your wrist if big enough
Printed from PLA, 3 perimeters, 20% honeycomb infill, using tree supports.
Make sure to follow me on Thinagaverse and Printables if you enjoyed the models. Designs - Thingiverse
Dwayne "The Duck" Johnson
![Macrotrack Oval Speedway Miniature [SAMPLE PACK]](https://media.printables.com/media/prints/1009945/images/7678308_aa95b304-5308-43e3-bddf-6b785481ac81_8a3a918b-c5a0-43ec-ba69-23c00beb1719/pxl_20240916_032001340.jpg)
