Counting matching models…
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
Added more sizes to Wojtek's LP-E6 battery holder. Should be able to print without any supports in the provided orientation.
This is to be applied to a 3rd party sheets. The printer will scan this code just like it does on the official sheets. I could not find anything that worked for me. So I designed my own from scratch. - Download and print the pdf file to…
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
Update v2: Better cutout for logo More compact Made the front wall shorter so it won't cover the logo Wall mount for TP-Link Deco BE65 WiFi 7 router. Includes cutout for ventilation, and status LED. Strong and snug fit. Use it for…
A convenient way to store up to 5 Canon LP-E6-style batteries on a 1x3 Gridfinity plate. Related model for the LP-EC Canon Charger .
If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…
Special Tamper Station with extra wide Tamper foot for good use. Special designed for a friend which has a Rocket Coffee machine with a E61 tamper. To get a better consistent coffee press, he looked for a tamper station. Because the price…
This is a Wallmount for your typical E61 Portafilter for the efficient organization of your Espresso stuff. Disclaimer: The original thing was shared by jimhigson on thingiverse under CC BY-NC 4.0 . I did reupload this to complete my the…
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
Printing Any material should be fine --it's not designed to hold food items or be subjected to heat/pressure. I used PETG, but that was to match the filament I used for the tamping stand and portafilter dosing funnel, which are subjected…
I created an adapter for the dewalt grinder so that it can be connected to a 35 mm hose. The adapter fits snugly.
This dosing funnel was designed using fusion 360 to fit on a E61 porta filter holder (58mm). In this case the Expobar filter holder was used, however it fits most generic 58 porta filter holders. PLA should work unless your porta filter…
currently setup ignition power A = Constant Bat+ 12v B = Constant Bat- 0V C = Ignition switched 12V Printed in PETG for durability crimp blue sleeves fully otherwise you can't insert them
The closed-body AD5X prints ABS well. However, there is a very large hole in the E6 part, through which a lot of warm air comes out of the printer chamber. There is no point in such a large hole, PTFE tubes do not bend so much and never…
This is arduino BME680 breakout board sensor enclosure/casing. Its made so that the circuit and the sensor are separated with the wall, that way the circuit is protected from the moisture. For even better protection some silicone sealant…
I could not find a bucket so made my own. Simply yet effected. Medium size coming in at 152mmX114mmx114mm (or 164 at the top of the shield). Design to be light and print fast at 3 walls (0.4 x 3 walls = 1.2mm thickness) 3D printing…
Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.
Rigid NXT Shop Vacs already have a rotating coupler on the end with a locking attachment. I designed this to attach the Rigid shop vac to Dewalt DWE6421 and DWE6423 orbital sanders. This adapter has a feature that helps still utilize the…
This is a tamping station for Rocket Espresso 58mm (E61) portafilters. It allows you to tamp with one hand with single-, double- or bottomless portafilter. I printed it in PETG and fuzzy skin which gives it a cool look. I designed it with…
I made a new magnetic funnel for my portafilters. I own a Bezzera BZ10 (used to own a Gaggia Classic) and an open basket portafilter with an IMS B702TH26.5M basket. The Outer Diameter is about 70mm for my portafilter. The E61 variant has…
I remixed rogersoh holder to have a smaller version of it Category: Camera
A 2x3 Gridfinity-compatible LC-E6 organizer. I also put “LP-E6” text below the charger to help identify what kind of battery it charges. The model has cutouts to make the charger easy to grab from the top or sides. Related model for…
I/O trim plate to for the user port area of Commodore 64 using the Ultimate 64 main board. This slides into the case before sliding the board into it. No modifications or screws needed to hold it into place. I have version 1.2 of the U64,…
Edit - I've used this for six months now and I don't have any desire to redesign stuff. It's worked out really well! My Hakko does not come out nearly as much with this solution at hand for small projects. This is a Pinecil case I…
I hated that some of these tubes of E6000 come with large nozzles, and I needed something more accurate for dispensing into cracks and such. Unhappy with the couple of nozzles I found online already that had different modeling defects and…
Store your Canon Camera batteries for Travel or organization! Choose the right box for the number of batteries you wish to store, and choose the proper fill for your use - there is a fill for batteries with Caps and a fill for batteries…
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
Gridfinity bin for pinecil. Mine is Aliexpress Pine64 version. Fits one TS100 and main unit. Stackable. Created with Fusion gridfinity plugin.
This is a housing I made for an ESP32 (doit esp32 devkit v1) and a BME680 gas / air quality sensor. Parts: 1x ESP32 Devkit v1 (eg…
i need it some caddies replacements for a couple of dell latitude E6420 and E6430ATG, and i do not wanna wait 3 weeks for parts from main land, so i recreated the original hard drives caddies for those laptops, Latitude E6420 and E6430…
I propose a remix of the Tinghiverse support https://www.thingiverse.com/thing:2416282 in which I adapted the upper part for the Pinecil Pine 64 welder. In particular, the front diameter of the support has been calibrated to contain only…
Remixed to fit the older SDSSDE60 version
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
A silhouette of BMW E60. For bigger prints cut it and then glue or weld together.
Triangle Marker Trackers by xile6 I use these marker trackers for 3d scanning. Simply print as loaded. Bottom color in a color your scanner can easily see. Then the top black so it does not get added to your model while scanning. The…
I remixed the top to have a multicolored logo. For best printing, print face down. Colors layers are only 0.4mm thick. It was design to be a fast print. If you use light colors your base color might show though. If it becomes a problem i…
This is a complete redesign of this great concept with a added exposed port for the cable and a slight fit change.
A simple slim light weight enclosure for a BME680 sensor. Designed based on the measurements of the specific board I was using, your mileage may vary. STEP file and original Autodesk Fusion model file included.
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
If you want to keep your ashtray tidy, I recommend this model
the bmw e60 vents were very floppy and i went to see what was wrong and some how that small piece in my vent was the whole reason my vents wernt standing straight and working i found one of them so i could design these pieces 1-1 as the…
My wife LOVES to spin yarn with her EE6. I decided to design her a fun new bobbin for it from scratch using fusion 360. Requires supports, but I minimized as best I could by splitting the tensioner part off and adding guide connectors.…
Double accu case for Canon LP-E6(NH)
This is a model of a EMD E-Series Passenger Locomotive. Parts of the locomotive are taken from the thingiverse models: https://www.thingiverse.com/thing:4796985 and https://www.thingiverse.com/thing:5602947. The trucks and underbody…
This is a FSX custom converted model of an E6-Mercury aircraft. Happy printing!
Here I have a simple portafilter funnel for your E61 systems for you :) As simple as it is it took quite some time to find a design with a nice and reliable fitting. I added a small “bulge” to have the funnel sit tight but not too tight.…
exact copy of the OEM covers. Highly recommended to print on a resin printer due to the mild curve
I have two portafilters and wanted to mount them with one rack and with less material than the original. I removed excess material and put 2 of them in line and I think 2 screws are enough for a secure mount You can use upto 4,5mm screws…
Grinding coffee beans makes a lot of mess, so I needed a funnel for my portafilter. I found one on thingiverse and it works so well! So I decided to upload it on printables as well. Scaled down to fit the smaller bottomless filter for my…
I've created a small and simple case for the Adafruit BME688 sensor board for use with a Qwiic-Connector (no cut-out for the pins). I've printed it with Prusament PETG, not sure if other filaments will fit as PETG tends to shrink a bit.…
This is a wrench to undo your Faema E61 group head mushroom and flow restrictor/ filter mesh cap. The size is 36 mm on one end and 22 mm on the other. I used it on my Rocket Appartamento (sizes should be the same for other brands but…
Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for 58mm Portafilter Baskets, that are mainly known from E61 brewing groups. I would advise you to use (opt. food-save) PETG, since it's not…
Glue in the insert or use screws M3 countersink will fit the best, but can also use button head if you dont mind the small feet they'll act as The insert can be found here:…
Assembling > following things are necessary: 2x M6x60 socket head screw 2x M6x30 socket head screw 4x M6 nuts You can easily change between the 90° and 45° angle.
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
This is a simple battery case for Canon LP-E6/N/NH batteries. Includes a version with and without lettering "LP-E6NH".
E69 is a popular locomotive at H0 scale and very rare at TT scale. This is a E69 locomotive adaptation at TT scale. For rectangle motor. For resin printer. I scaled the original model from Thingiverse to TT scale. I also added some bars…
Just mocked up a simple MHD puller that makes it easier to take it out. This was designed for a 5 series (e60/61) as it is extremely hard to get this out without using a screwdriver or something similar. Printer: Prusa MK3S/+ Material:…
This is just the arm piece on the Cleaning Head Module for the i Series and E6 Roombas that holds the roller brushes into place. Some disassembly and re-assembly is required - you'll need to move the bright green latch assembly from the…
Line 6 HX Stomp Mini Tap Tempo with Expression Out Guitar Pedal: I made this pedal to clean up my HX Stomp setup. One jack connects to the HX Stomp Exp1/2 Jack with a stereo cable and the other jack connects to an expression pedal with a…
Board models for: BME680 SHT31/SHT41 SGP30 Category: Models
man kennt es schöner 5er aber vorne keine Möglichkeit sein Getränk abzulegen stellen ohne original Cup Holder. Kein bock Armaturenbrett zu tauschen oder was kaputt zumachen? ich habe eine Lösung erarbeitet die für alle E60/61 ohne Becher…
Gridfinity 2x1 storage for a Canon LC-E6 battery charger, which is for the common LP-E6 batteries. I wanted a more compact vertical storage option than the available lay flat designs. I use other chargers more regularly, so I just keep…
I didn’t want to buy a full cutting head, and we couldn’t get that part so I modeled it.
First of all a big thank you to JeepingJohnny and all the predecessors in making these great models. With these models you can use E6000/S80 needles which are much easier to get in Europe. I had some issues with the rounded groove design…
Its a simple model created in fusion360 and exported in .step file format for dual color in the keychain Best dimension size in slicer (X=70mm, Y=60mm Z=4.5mm) Fell free to test and remix
Base for 24mm long tabs. With a stand for it.
I've found this model from Dima Tsvetkov on Thingiverse and adapted it for the Barbie-size. The original model has a 1:12 scale. The files here are the original ones, so they are to small for Barbie. I scaled it up by 220 % to make it…
Os presento los portabaterías diferentes, con un novedoso y práctico diseño de botones laterales. Son para una de las baterías más populares de Canon; la LP-E6 N ó H. He diseñado ocho versiones o variaciones para que cada uno imprima el…
Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for a 58.55mm Tamper that you probably use for your espresso machine, it it's a E61 one. It was custom made for the Lelit Tamper, that came with my…
This is a magnetic funnel for my Rancilio Silvia Espresso machine. I've been using it successfully for the last 6 months and vouch that it works as needed. It uses tiny 3 mm diameter x 2 mm high magnets, 12 of them so that the grip is…
Made this for a friend because his original case had a crack. The hole is wider then the stock one because we had to use another aux jack. Feel free to remix it because my version is not perfect. For clipping it in you have to use the…
I created a full E12 series of resistor labels for the 1x1x1 box and drawer with 3 comapartment. In future i will add more label for extending some values from E24 series and also add labels for small capacitors. I did a manual filament…
Allows mounting for the installation of a sandpaper disc
Model These adapters allow you to attach a Blackmagic Micro SDI -> Hdmi converter to the SmallHD501 but the adapters should work on other monitors with LP-E6 battery slots. Print Settings I would highly recommend printing this with 3+…
Wall mount for Canon LC-E6E charger. Charger just slots in, 2 holes for countersunk screws. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 0.2mm layer height Infill: 15%…
Do you also have a Pinecil Pine64 soldering iron? It is an excellent tool for lightness and manageability however, precisely because it is very light, when you place it on the work table using its natural feet it exposes you to the risk…
Expobar Brewtus Tamper station E61 for inclined portafilter UPDATE: Added a bottom and tamper holder in version 2 This is a tamper station for the original portafilter that is coming as standard for the Expobar Brewtus series of espresso…
Box for the gas sensor BME680. Project https://github.com/heximcz/raspberry-pico-mqtt-bme680 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 15% Filament: Design Devil PET-G…
I wanted a Gridfinity holder for my Canon LP-E6 Batteries for by R5, but that would let me store them with the covers. I prefer landscape photography, so I'm always throwing extra batteries in my bag, and prefer to keep the covers on them…
Fits original lid and hinges
A Canon LP-E6N Storage Tray to keep your batteries nicely sorted.
This is a remix of Wojteks model. I wanted to have a very clear identification about the charging status of the batteries. The status is identified by the covering flags. Parts are properly oriented, just drop them in your slicer and you…
E61 (58 mm) style portafilter holder for Timemore Sculptor coffee grinders. Should work across both 064 and 078 series. Aligns with the grinder chute using magnets similar to the original catch cup. Tested with the Decent portafilter, but…
This is a coffee bean tank extender for the Jura E60 coffee maker. It can hold up to one bag (1 kg) of beans, so no more half filled coffee bean bags in the kitchen. The design will use the original cover, so simply remove the original…
Sometimes an extra later of security is more important than longer battery life. I use this when going to highly populated places. The idea is to have an Airtag in the camera bag with this and if someone steals your camera bag they will…
This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…
The insert you'll need for this box or use it in your own project. The remix would allow for this to be under commercial use licence. I dont agree to that, so thats why Im uploading as this. The box can be found here:…
[German] Da der Originalhopper der Mahlkönig E65S GBW für meinen Heimgebrauch doch etwas übertrieben gross war, habe ich diese Alternative designed. Der Trichter nutzt das Unterteil des orginalen Hoppers, somit kann auch der Verschluss…
Espresso tamping station Mk3. Edited according to Macropin comments (thanks for the feedback) Should be now suitable for most of the E61 portafilters (basket size 58-60mm; i.d. of tamping station is 73,2 mm). Station has integrated stand…
This canopy provides a lower camera angle and integrated holder for the 2.4Ghz RC control antenna to keep it in place. There are four screw holes at the back to fix through which provide lower camera angles the further away from the…
Wall mount for Shimano E-Bike battery charger. Print two of the brackets per charger. Remove four T10 screws from the four corners of the charger. Insert the pins of the printed brackets into the holes where the screws came out of and put…
Wayllshine E6 850nm Illuminator Picatinny Mount by Qwerm An offset picatinny mount for the Wayllshine E6 850nm IR light, a $15 IR illuminator. You can also get it for $10 from Aliexpress [ Link ] Orientation: Print on it's side. Settings…
Snug fit on the two-ear version, resize to -0.5% for the one-ear-version. Supports recommended but not required.
So this is a cap to keep the diaphragm and mic body of the e604 from falling out the end when you plug a cable into it. This is handy if some silly drummer smashed your $100 microphone and you want to get a little more use out of it…
adapter for using T12 tip on pinecil, with knurled grip. use it along with pinecil mosfet saver from chestwood96 for double protection https://www.printables.com/model/97073
A simple raiser to help with air flow under while the laptop is on a desk or in your lap. 3d scan of the laptop used to create a tight fitment. Simply print and place under laptop on top. If you want more of a permanent solution, you can…
