Counting matching models…
Mayan Death Whistle. Settings: 0.2 mm 25% infill optional: paint on supports for the cheeks (see pic 2) I printed it out of PETG with a 0.6mm nozzle Warning: it's LOUD
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
Modifications to the body to allow for a more ergonomic blasting of the death whistle, and some nice pointy horns for a -5 penalty to enemy morale checks.
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed Scale it as you like :)
Print approx. €7.51–€9.18 excl. taxPreliminary estimate for one variant
I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name).…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
Aztec Death Whistle Updated (fixed bottom 12/7/2024) Small sound demonstration here.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
A working replica of the Aztec Death Whistle from Ghostbusters: Afterlife Fixed errors from the original design . Printing Print with the eyes facing up, default orientation. Use support on the build plate only to avoid supports inside…
Print approx. €4.86–€5.93 excl. taxPreliminary estimate for one variant
A long time ago, in a galaxy far far away…. I designed this Star Wars themed clock, the Death Star Clock. The clock is easy to print and will fit on Mk3 print beds. I've also added a version for the mini, couldn't test this though as I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
A quick remix in tinkercad to add a loop so I can have this on my keys. ive printed in resin and FDM and both came out great. I did make the top infill quite high for strength
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
Print approx. €36.53–€44.65 excl. taxPreliminary estimate for one variant
Took about 2 1/2 hrs to print on my ender 3 V3 SE.
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
Simple, thin, feather-shaped bookmark. Printed in translucent PETG with color change for contrast.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
These are here for you to make fantasy feathers! of any colour, texture, size, etc and they will look quite realistic. I think they would be cool on great big hats, giant cosplay wings! Or costumes and capelettes or creature puppets!…
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
This high-detail Guardian is ready to watch over your home. The three segments spin independently and are designed for a minimally supported print. There are three segments plus an additional alignment pin. The provided .3mf file has…
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET
3D Printable statue of Sam Porter Bridges from Death Stranding. For changed print settings take a look in uploaded 3MF file. Uploaded Gcode contains manual fillament changes, which doesnt need MMU. For right color order put the gcode into…
Print approx. €31.52–€38.52 excl. taxPreliminary estimate for one variant
Weather protection with a 3D-printed gill shield (Stevenson screen is a box) for RuuviTag temperature/humidity/pressure sensor. Basically a DIY bluetooth weather station. Keeps the water out yet enables the air and bluetooth to go…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
🔒 Notice of Use This design is for personal, non-commercial use . Commercial use is not permitted, either digitally or physically . 📩 If you would like to obtain a commercial license , please contact me directly or sign up here:…
Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This is the Tank Demolior Class Heavy, “Deathhead II ” as inspired in book four of the “Mongruxx” Novels (Mongruxx Until We Cross This Bridge Again). For all of you SCI FY tread heads out there. Designed on Tinkercad, the chassis/Treads…
Print approx. €8.12–€9.93 excl. taxPreliminary estimate for one variant
Hi all lovers Easters time I created an Easter bunny wreath, for everyone who loves Easter. Ideal for decorating your front door. I hope you will like the model and it will decorate your home. Happy Printing :-)
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through…
Print approx. €6.05–€7.39 excl. taxPreliminary estimate for one variant
Little known fact: I bought my first 3D printer so that I can print leather embossing stamps. This actually works pretty well if you are interested in it yourself. So to go back to my roots for a bit – and fitting with the Catch-All Trays…
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for one variant
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
I designed this cute keychain with the Harry Potter Deathly Hallows emblem. Both beautiful and useful at the same time, because it is the size of a 1€ coin and can be used for the shopping cart. Ho disegnato questo simpatico portachiavi…
Death Star Egg Cup - Testing out Meshy web site for generating 3d models for use with Blender displacement. Evaluation: LumaAI is better. Meshy offers more refinement and prompt options than LumaAI. But its going to cost you after your…
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Harry Potter Deathly Allows keyring
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Death Valley APC For your up armoured death-dealing troops that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the vast megalopolis city-state. Panic crowds…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Death Valley APC Container Carrier For your up armoured death-dealing troops, deliver these contains that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the…
Whistle not included! There are two variants: Signal-Whistle-Replacement.stl Version with cutout for a 42mm x 4.5mm (diameter) ferrocerium rod. Signal-Whistle-Replacement-Simple.stl Non-functional spacer part, just to keep the space…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
Print approx. €16.59–€20.27 excl. taxPreliminary estimate for PETGSource material: PET
Featherboard and miter slot clamp for a Powermatic PM-1000 table saw. The featherboard is designed to go right up to the blade so you can do fairly thin rips on the saw. Uses 1/4"-20 nuts and bolts. Glue the top and bottom spindle parts…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Love the knife but didn't like that it didn't have a sheath so I made one. Has some flexures to keep it on the blade. Print in PLA at .3mm layer height. Prints in 30 minutes and you can edit the text in PrusaSlicer to say whatever you'd…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Love, Death & Robots (stylized as LOVE DEATH + ROBOTS ; represented in emoji form as ❤❌🤖) is an adult animated anthology television series created by Tim Miller and streaming on Netflix. Although the series is produced by Blur Studios,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Print Instructions Printing Recommendations Material: PLA LayerHeight: 0.2mm 15% infill. Parts Central Platform Beam L Beam R Beam F MongerBase MongerBaseCap MongerCap MongerWall Outer Platform MainL1 MainL2 MainR1 MainR2 PlatformL…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
After delivering 50 RC3s to a local hospital I worked with them to further improve the design to address their concerns. With the RC3 they liked the comfort and its the ability to adjust to any head size but disliked the open top and…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
Damaged-Weathered Star Wars Data Pad Not sure what this is good for. But I put in some time on this experiment, so I decided to publish it. Originally, I wanted to work out as a switch plate cover. It did not make the grade. The layout is…
Print approx. €5.76–€7.04 excl. taxPreliminary estimate for one variant
This is a new England style base trim for deck posts that is designed to snap together. Just print two and they snap together (it is the same part)
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Low-poly model added Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
Print approx. €36.67–€44.82 excl. taxPreliminary estimate for one variant
Alcofind breathalyzer nozzle Ustnik do alkomatu Alcofind Filament: PETG Layer: ap 0,1 mm Support: yes Infill: n/a Printed using Anycubic Kobra 2 pro
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
Leatherman ARC mod that adds the capability to carry original Victorinox toothpick (or tweezers) and pin. You can use the original torx screws that came with your ARC to secure the mod. The pin and toothpick can be bought separately on…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Death Valley APC - Open Bed For your up armoured death-dealing troops that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the vast megalopolis city-state.…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
This is a replacement latch for tubs/totes I purchased at the container store. The manufacturer is IRIS. There are many sizes but the latch seems to be similar with all the weathertight ones.…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
In the future, the Imperial Army has sucked the Earth dry and converted it to a Death Star! The primary beam weapon was located over Hawaii, where construction began!! 2.5" Holiday Ornament version of my mash up here:…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Advent wreath designed for tea (led) candles. When using real tea candles, I recommend printing from durable material and using only under supervision. Tested only from PLA and the shape does not deform. For candle stands, I recommend…
Print approx. €6.99–€8.55 excl. taxPreliminary estimate for one variant
Todo: increase steel slot thickness as it’s too snug. add spring or bead to hold rod/steel in without too much resistance
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Tout est dans le titre Il y a un jeu de 0.2 mm entre le pièce, donc il ne faut pas les réduire trop (35% c'est ok et elle tient toutes sur un plateau de Prusa Mini) Everything is in the title. There's a 0.2 mm gap between the parts, so…
Print approx. €6.80–€8.31 excl. taxPreliminary estimate for one variant
A friend of mine wanted a new sheath for this knife because the original wasn't meeting his needs. He had removed the handle slats to give the knife a more svelte feel, but the original sheath no longer worked with this modification.…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Just a simple model of an Advent wreath to decorate your room during the holidays!!! For candels with 40mm in diameter or less. Made from 4 same parts. One of the models is already decorated with a star and a tree but the second one is…
Print approx. €7.16–€8.75 excl. taxPreliminary estimate for one variant
The Gerber Principle knife comes with a clever modular sheath that allows the user to choose between two different types of belt loop, and they attach to the rest of the sheath using a locking plastic spring fork. The one I bought was the…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
This holds your dice with an enclosure so you can carry it around. It fits most normal sharp edge dice, some vary in size a few mm, so I made the slots a little bigger to fit most regular sized sharp edge dice. The D4 slot is for pyramid…
Print approx. €6.09–€7.45 excl. taxPreliminary estimate for one variant
Button designed as a Deathly Hallows symbol. Quick and easy to print with no supports and no bridges. If you were interested in commercially using my models you can check out my Patreon. patreon.com/3dprintree
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
A wall-mounting bracket for the Ambient Weather Outdoor PM25 (PM2.5), which for some reason ships with screws but no mounting holes. The sensor simply slides in/out of the top for periodic recharging. The bracket uses the side lugs of the…
In the case of the inscription wreath, be careful to use the mirror image option if you want to use it as a matrix.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
I love decorating with the Lego Wreath… and wanted a seasonless design. This is a meld of the original design and what I think works well for the needs of the Lego wreath.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Sweet, now my tactical chapstick's got a new sheath* to replace the one that got smashed! * Sheath, cap, whatever you want to call it. Its purposes are to cap the container's end and to guard the adjustment mechanism. Unlike a typical…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
A must-have for every meteorologist. Tired of creating forecasts? Just dice tomorrow's weather! Corret in 1 of 6 cases! The cube consists six flat parts, which you can easily connect together, so you won't need a lot of filament. Start to…
Print approx. €8.05–€9.84 excl. taxPreliminary estimate for one variant
Multicolor Harry Potter Deathly Hallows keychain Vícebarevná klíčenka relikvie smrti z Harryho Pottera
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I didn't want to chop up the leather strap on the back of the Key-Bak, so I designed this holder: Less plastic Key-Bak doesn't stick out so far on the back I believe this will work with non-leather strap version as well Like the original…
I made myself corner water diverter as because of poor design current water divert does not keep all water away from wooden base, especially in corners, wood under does not like to be wet! Can be glued in place using silicone or montage…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
My wife is heavily into various forms of crafts. As such, she uses many different cutting tools many which are different size scissors. The scissors that this cover was designed for are Fiskars Micro-tip. These scissors are extremely…
wider finger spacer replacement for leather tab
These NEW over-engineered Prusament spools are just so versatile! They normally assemble with bayonet-style twist-lock sides that require a 3D printable tool to open . This over-engineered lid system uses the spool's center hub (plus a…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a feather hat for the YubiKey 5C NFC. The part has been designed to insert a YubiKey 5C NFC while the model is printing. The provided gcode will pause the print at the correct layer. Thanks to JGW for the YubiKey 5C NFC model I…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
This is a fan-made keychain inspired by the character from the “Plastic Death” album cover by Glass Beach . I designed it as a gift to my friend and decided to share it with the community for free. The model prints cleanly, has a solid…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
For Potterheads :D
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is a remix of the great Little Josef model by Dominik Cisar made to be used as a Death Racer head. Just add googly eyes!
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
A parametric sheath with parameters specific to the Pampered Chef Quikut Paring Knife #1250. These came with carboard sheaths which these replace. The parametric model can be adjusted if the blade fits too tight or loose based on your…
This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a 0.8 MOD gear 60T for the 2" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading “Dialogue doesn't deserve Death” with art of a street sign showing the intersection of MLK Blvd and Kirtk St. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included…
Print approx. €1.88–€2.29 excl. taxPreliminary estimate for one variant
Another request from my wife. She loves bags but this one was losing its shape when worn. After a few iterations, this one worked well. It could be printed in one piece if preferred. Printed in Elegoo PLA. Spine - 0.25mm layers, 15%…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
We needed a way to fix our advent wreath in a better way than the usually duct tape from the years before, hence this little print. Printing instructions: - Printed in Prusament PETG (0.2mm Speed) - Print two of the individual piece -…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
On an old Weatherdefyer umbrella, I once got at a conference in Seattle the top cover got lost. This part replaces it and can be screwed on top of the umbrella with a M3 machine screw. I printed this with PETG since this is expected to be…
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
4b0 863 279 c wjd 80881
Update Nov. 2024: I completely redesigned this in Fusion 360 and tuned the tolerance for my printer. I suggest printing all the parts on the same printer to ensure a proper fit. There is a .2mm tolerance between the studs. Check your…
A simple Lego Wreath. Not to scale. Adjusted to be printable without supports. Print 6 or more of the branch pieces and as many of the studs as you would like. Press fits on my printer but you might need to sand slightly if your printer…
Inspired by featherboards we can find on the market, I designed my own adapted to my need and the bed size of my MINI+ (180mmx180mm) I designed it using Fusion 360. Model includes T-nuts and knobs for M6 and M8 screws to fix it on the…
Originally published here on Thingiverse . This was made with MATLAB R2016a in a similar way that of other astronomical bodies, plotting a topographical map on a spherical projection. I could not find a good, detailed and free…
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
I didn't find a small death star lamp. So I decided to remix one. Fits nicely into the Ikea Fado 17cm lamp. https://www.ikea.com/de/de/p/fado-tischleuchte-weiss-40455437/ (german link) Have fun printing. It looks super nice! Printed it…
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast! Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :) Print takes about 3h,…
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Support me & Join Printables Club For complete earrings, you need two printed earrings (very easily printable and without support), two earring hooks , and two rings .
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Harry Potter deathly hallows themed bookend. Please like and enjoy :).
I made a Remix of my Bokoblin BIG SIZE Chest. it has a lot of space !! look at my other Chest https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and- - Infill 15% - Support yes
Made this for the Mrs after she saw a similar idea on Pinterest. I started with embeddedjunkie's model of the death star and modelled into the Yarn bowl with a base and cut out for the yarn to feed through, obviously this comes through…
A chilling gothic sculpture of Death arriving by boat, symbolizing the passage between worlds. The hooded figure, skeletal and solemn, guides his vessel through sculpted waves, holding a staff crowned with skulls. The boat itself is…
