Counting matching models…
This guy stores the larger Titebond glue bottle upside down so it's ready to pour when you need it. Included is the .stl and a 20% infill .bgcode file if you want to just go for it – setup for the center of my Prusa MK4. Note that ironing…
Print approx. €8.48–€10.36 excl. taxPreliminary estimate for one variant
This is the Ebony Dagger from Skyrim. The measurements seem accurate, but it is a little small, so you might want to scale it up a bit. UPDATE- I have remade the 3d printing files to fix some issues and make them easier to print.
This is a remix of the lovely "Ebony Dagger (Skyrim)" model by Shadowcraft. Thanks, Shadowcraft! I have made the following changes to the original: Scaled up the dagger so that overall length is now about 40 cm. Trimmed the base of the…
This design was created using Adobe Medium and an Oculus Rift/PC. I have sold it for several years in my Etsy store and assembled/shipped about a dozen of them in that time. The files have been heavily refined for maximum success rate…
3D printable version of the Knucklebones minigame from "Cult of the Lamb" videogame. I watched the video from Makersmuse, which inspired me to create the board game from scratch with a few improvements / changes. I designed the game to be…
0.2 layer height, support, support overhang angle 60 deg, brim
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
This enclosure is divided into multiple parts viz., Top, bottom, and buttons. The top and bottom half are held together with friction. No screws are required. NOTE: Please make sure to remove the SD Card before opening the case, or else…
Keycaps for Mechanical DIY Barebones Keyboard Parts Used: Inland Gaming MK Pro 75% Barebones Keyboard Inland Blue-Black Shimmer Filament Inland Gaming Coiled Cable Kailh Box Autumn Switch Printer Settings: 230°C Nozzle Temp 60°C Bed Temp…
While making this project it is highly recommended to desolder the PCB which has the side buttons on it to keep it from rattling inside of the mouse and to make the mouse lighter. This probably needs a quite well calibrated printer. The…
Game board inspired from the CotL game Knucklebones.
I really enjoyed playing with the knucklebones roller introduced by @AP_Design and AroundSquare. However, I was unsatisfied with how my print came out. No matter what my support settings were I couldn't get it to print so that the end…
Hey there, bird lovers! I've been tinkering around and came up with a fun solution for our feathered friends - a 3D-printable Cuttlebone Holder. I know how much of a hassle it is dealing with those cuttlebones they sell with iron holders…
I designed these based off of the @SteveRowe_181180 version with a much different approach to swapping the nozzles out. The nozzles are inserted through the cap like how a baby bottle works. I printed the cap(s) in PETG upside down and…
I'm always vaguely annoyed while opening a bottle of Titebond wood glue. I recently saw that someone had made a beautiful wooden bottle opener and decided I needed one. They were not for sale. I then decided that instead of spending two…
This is my version of the Knucklebone from Aroundsquare! If you don't know what this is and still landed here, you can find all necessary information on https://www.aroundsquare.com or on the Youtube channel: https://youtu.be/ey_FQ3gLzp0…
I got tired of my titebond glue bottles taking up workbench space and having to wait for the glue to flow toward the nozzle. Created this mount to make more workbench space and keep the bottles inverted to make dispensing easier.
Sturdy wall-mounted holder for two (2) 16oz Titebond glue bottles.
This is an organizer for the game Iki , including the Akebono Expansion. It holds sleeved cards (I use GameGenic Premium Matte). Print all files once, if not differently stated in in the filename (e.g.: print __CardTray_x5.stl__ five…
This model is inspired by a non player character from a private campaign (a sort of very-alt-universe Against the Giants). This Hill Giant's name is Kethra, aka Mother Hatebone. NOTE: This model was designed for - and only test-printed on…
Knucklebone dice A simple dice to play Knucklebone with your friend It's based of the official Knucklebone dice made by Level Up Dice It work very well with this board made by @tr0sity_394047 Have a some good game ;D
All credit to original creator/designer: https://www.printables.com/model/1114029-stand-for-titebond-glue-bottle Added steep chamfers to be printable without the need for supports. This prints without the need for supports - make sure to…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…
This is my take on a board for Cult of the Lamb's Knucklebones dice minigame. Travel sized and folds in half for easy transport! With optional recesses for magnets and a printed sleeve to prevent your dice from getting lost in your bag.…
knucklebones from the cult of the Lamb with 18 dice
I DESIGNED A NEW EXTRUDER THAT USES HGX 2.0 GEARS, THAT ARE SLIMMER AND PRINT BETTER. LOOK FOR IT ON MY PROFILE
This is a cuttlebone holder SPECIFICALLY DESIGNED FOR PARAKEETS, PARROTLETS AND COCKATEILS. Anything larger or stronger than a conure would easily be able to break it and then this could become a hazard for your bird. I would recommend…
Two simple bottle holders, wall mountable, for Titebond 16 or 8 Fl. oz Bottles. Enjoy. The screw holes are perfect for Kreg pocket screws. Print Settings Printer: Reprap Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: Any…
This is a picolo trombone made with squares, it is dimentioned to work with any standartd mouthpiece (7c in the picture). the model works really bad but if you want it enjoy ! Category: Music
still uses mounting points as hummingbird/lgx but it is shorter and lighter. with 15% cubic infill, 2 walls it's under 10g of printed parts. I LEFT THIS MODEL ONLINE ONLY FOR SUPPORT! I DESIGNED A NEW EXTRUDER THAT MAKES MORE SENSE TO ME,…
Level up your Knucklebones game with this epic 3D-printed dice case and gameboard! This sleek, compact design features a magnetic closure to keep your dice safe during all your adventures. The lid doubles as a dice rolling tray, making it…
Knucklebones is fast and a simple game to learn. This is a simple take on a board and dice tray that's easy to travel with and teach other people who want to play. This is a plain board designed to be easily printed, with minimal post…
A simple case to play the awesome little dice game “Knucklebones” from Cult of the Lamb. With support for common 16mm dice as well as smaller 12mm dice, just download the appropriate size and hit print! Printing Print the top case with…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models then come follow and support me on Patreon - where you'll get access to exclusive models. This is an Ebonclaw from Turn of Fortune's Wheel.…
This game and idea is amazing! Description: I completely redesigned it from scratch after printing the original files from Angus, Makers Muse, ( https://www.youtube.com/watch?app=desktop&v=kPLRX0LjzWs&t=220s ) ( Edit: found here a…
Are you a fan of Knucklebones like me? Here's a great way to carry around the dice and be ready for a game at any time. This compact case features storage for 18 16mm Chessex d6 , a play area on top, and a magnetic lid that does not…
Holds two 16 oz bottles of glue and a silicone brush. Holes at the bottom should prevent a vacuum seal that keeps the bottles from coming out.
I needed a simple base to mount my BeagleBone Black. Not a full case, just enough to protect the bottom components when putting it on a desk. I first tried this model , but I wanted stronger screw posts, and the base nicely matches the…
Warning!!!! It is very important to be careful assembling this case. Since it is really slim you can find yourself in trouble fitting the BBB inside the case. My recommendation is to insert first the usb side and after the HDMI side,…
Introducing the Knucklebones dice game board . My design is inspired by Maker's Muse video on YouTube , but with slightly different objectives: Print-In-Place: Designed for seamless printing without assembly. Forgiving Model with 0.3mm…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
This stacking organizer holds a Barebones Enamel Cup or similar sized coffee cup and prevents it from tumbling around in your boat, rv or Van. Or you can use this to organize your cupboard at home. Features Hidden Tea Bag Holder Behind…
A little tray/case for BeagleBone AI64. Uses 3M Screws to hold it but can just be used snap-fit to the board too.
This is just a bowling ball cup I remixed per request. (For other brands, I would like to upload them as a different model keeping this set Ebonite themed.) You can either use the .3mf files with printers with multiple extruders or…
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- I already have a set of 5 home boards for…
Needed to upgrade my empty soup can that held my wood glue upside down. Just love making functional prints.
This is a holder for the Beaglebone White, Black, or Green. Only tested with Beaglebone White, but I am quite certain the physical format is the same. I printed this in PETG in case it sees high-ish temperatures, but PLA would probably be…
KNUCKLEBONES with Dice-Arena While looking for an entertaining dice game for two players, I came across Knucklebones. Knucklebones is normally an in-game version of the computer game ‘Cult of the Lamb’. There are already some conversions…
This is my collection of fakebones for all Onewheel versions. Just mirror the part for the other side Flip it to print on the top surface (where you stand on), except for the "solid" version. All fakebones are meant to be attached with…
The Ebony Guardian is a stylized 3D figurine of a majestic shoebill, standing proudly on a round base. With its sharp lines, iconic beak, and vigilant expression, it radiates both authority and calm. This piece is perfect as a decorative…
💙 What Is a Bluebonnet? Species name: Lupinus texensis (most iconic species) Family: Fabaceae (legume family) Origin: Native to Texas and parts of northern Mexico. Type: Annual wildflower — celebrated for its seasonal fields of vivid…
This thing contains a mounting plate and a drilling guide for the “Beaglebone Black”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate is 2 mm thick. M2 5 mm or 1/4″ 4-40 screws…
8oz Titebond Pegboard Holder using Sy's Mounting system
I really like the DIN rail mount designs by imstrng and used them for my Raspberry Pis and disks but was in need of a DIN rail mount for the BeagleBone Black. Therefore I took the default DIN rail mount design by imstrng, loaded it into…
tr0sity released a Cult of the Lambs Knucklebones Board. This sleeve fits that printed at 110% to properly fit dice.
A dice board game from the videogame Cult of the Lamb. You can find a lot of great Knucklebones Game Boards. But I wanted one for 16 mm dices. All I could find were board for 10 mm or 12 mm dices. Also I wanted a board that can be folded.…
''Akechi Mitsuhide'' was a Sengoku period military commander who rose from a lowly position to become the lord of a castle in a country, gaining the tremendous trust of Oda Nobunaga, one of the three great heroes. Akechi Mitsuhide, who…
This is another simple magnetic Knucklebones board game that uses 6x3mm magnets (glue them in place with superglue or E6000 glue, be careful not to mix up the polarity!) to keep the board closed. It includes an optional loop to ensure the…
https://cult-of-the-lamb.fandom.com/wiki/Knucklebones Base Game Print This is the included 3D Print. It's print-and-place so that you can do it all in one go. Dice You'll need a total of 17 normal-sized D6 dice.
A stand that I made for my Beaglebone AI-64. I figured the board gets to hot for a case therefore I went with a stand
This is my version of the Knucklebone from Aroundsquare! If you don't know what this is and still landed here, you can find all necessary information on https://www.aroundsquare.com or on the Youtube channel: https://youtu.be/ey_FQ3gLzp0…
Ebon Jaguar Prime, AKA Cauldron-Born for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included…
My pretty version of an ATX PSU to lab bench power supply. Follow the RepRap ATX to power supply (PSU) conversion guide for directions and warnings. There seem to be enough PSU conversion cases/fittings here so why did I upload mine: 1.)…
2x2 Gridfinity holder for titebond wood glue and glue applicator brush. Printed with stock .20 setting within Bambu Studio
Bare Bones Fan Duct. Fans slide in, no screws to hold them in place. 2 screws to hold the duct to the carriage. Print out of PETG or greater material. .4 or .6 nozzles are fine. Bridging must be enabled! No structure or rafts are needed.…
I had a rather specific size need for a commander deck box that didn't seem to exist, so I made a rather basic one that fits those needs perfectly. Not the prettiest box to look at but it holds 100 cards (double sleeved will not fit) + up…
All you need to prepare was: ESP32 Ai Thinker Camera kit Soldering iron insert nut helping tools (necesary) d Nuts 2pcs m6 nuts 2pcs common m3 insert nuts Bolts 1pcs m6 35mm bolt extra 1pcs m6 40mm bolt for pan arm 2pcs m3 30mm bolt…
Nice loose fit for constant use, but secure. Also catches drips! You will need supports (snug works well).
Ebony , Destroyer of Diligence ( Designed in Blender ) 40% infill in ball is best for some weight , The chain may need some clean up with a hobby knife or you can try paint on supports in Prusa-Slicer if you like As you can see I have…
Make sure to add the pause in your Slicer of choice on layer 12 before printing so you can insert magnets!!!! These are standoffs designed to let you mount boards to metal pieces using 10x2mm Neodymium Magnets. The 3MF files have…
There was no easy-to-print version of the knucklebone toy, that had the same shape as the original, so I remixed a model to make it print in one part. Toy works by just throwing it in your slicer and printing at ~20% Infill If you want to…
This is version 1, the Beaglebone AI doesn't come with a holder so I created this one. I printed with PETG. The cover for this reminds me of Star Wars Millennium Falcon. https://beagleboard.org/AI
This is a case for the Beagle Bone Blue. I felt the original case was nice but needed a couple of upgrades. To that end I added a spot to mount extra circuit boards like the boost converter and the adafruit ultimate GPS as seen in the…
Check out this 3D printable set of the game Knucklebones from Cult of the Lamb! It’s all set up to store 12mm dice, and you’ll need 17 of them to play. The best part? You don’t need any supports to print it, so it’s super easy to make.…
This glue holder is a simple but game‑changing addition to any woodworking or maker setup. By storing your Titebond bottle upside down, it keeps the glue at the nozzle and prevents the tip from drying out — meaning no more poking clogs…
This is a very simple model board of the game Knucklebones from the Cult of the Lamb game. It's sized for 12mm D6 dice. It also takes 6x3mm magnets. No special print instructions, no supports.
Bill of Materials Surebonder Hot Glue Gun 4x M3 20mm Screws Print Instructions Print as normal, I printed in PLA and seems to be fine with the heat. I cut the model in my slicer along the point of contact with the hot glue gun so it would…
A more convenient variation of the box for the same game
Commissioned work for the Karlsruhe University of Music (HfM). All screw holes are designed for M3x5,7 threaded inserts (I used CNCKitchen's inserts). Printed using Prusament PETG.
Das ist eine tragbare Version von Knuklebones aus cult of the lamb. ich habe 2x 6*2mm MAgnete verbaut das die box geschlossen bleibt. Im inneren kann mann 9 Dice lagern. This is a portable version of Knuclebones from cult of the lamb. I…
At 0.2mm layer height, this model will require a colour change on layer 11 to go from the black background to the white qr code. Note: for a successful print your machine should be decently tuned, with special attention to your extrusion…
Simple cuddlebone holder for birds, quick print and no supports needed! Simply position the cuddlebone vertical in the holder between the clamps and insert the ribbed backend through the cage (see image).
KNUCKLEBONES - To The Power Of 4 A variation/extension of the cult dice game "Knucklebones" with more strategic depth and a longer playing time. Instead of nine dice per player, the game is played with 16 dice per player. And instead of…
Uses the multi connectors. https://www.printables.com/model/716558-multiconnect-generic-connector-for-multiboard Fits Titebond 8 oz bottles upside down and another one to hold the brush. No supports needed. 3 walls and .2mm layer height
A complete case for the Beaglebone Black and a BB-View LCD 4.3 cape. Beaglebone Black board http://beagleboard.org/black BB-View 4.3 LCD cape https://www.waveshare.com/lcd-cape-4.3inch.htm
case for BeagleBone black and DLP2000
barebones usb stick pcb with the two chips and plug made in freecad / ondsel (parametric file included). planning to use it as a cutting template to make a case for a defective usb stick i have.
do this mod at your own risk, i am not liable for any damages that might occur during install or tear down of your 3d printer and or accessories. that being said, do you want your qidi q1 pro to be less functional? do you hate all those…
🦴 Voici… le ScratcheBone ❄💀 Le grattoir qui gratte sans état d’âme. 👉 Bon on est clairement pas dans la période, mais quand on a une idée à la con… c’est rarement au bon moment hein 😅 Fini les grattoirs fades et sans personnalité : place…
A more minimalistic ‘case’ for these component testers - keeps the battery secure in place & doesn't obscure the test points. This requires 4x M3 screws and nuts to attach it to the tester. Please be aware these testers can vary, so be…
Moule réalisé pour remplacer un modèle défaillant. Les photos correspondent pas à une version non publiée: un coté est plus long que l'autre. Le modèle publié est symétrique. A imprimer face plane contre le plateau. Supports fortement…
Remix of @tkramm's Rack Mount Adapter to fit a BeagleBone Black board. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 mm Infill: 20% Filament: DasFilament PETG Black…
This is a per-player game board for your dice. Has a cute Red Crown facing your opponent. I suggest printing a dice tray too. Print two, invite your friends over and two becomes one becomes ~~ nothing ~~ Extremely pocketable. I've printed…
Summary: This stand is perfect for working with the OpenROV BeagleBone and OpenROV Cape. It is suitable for sitting on your desk, or for mounting to a wall. I've included the Google Sketchup files for both Versions 1 & 2 as well as the…
Support tete en bas pour flacon colle Titebond Quick
About This is a mounting bracket for the BeagleBone Black & compatible boards. Combined with the SSR DIN rail mount , it can be used to securely attach the board to a standard DIN rail. The mounting holes for the BeagleBone are designed…
Laser cut on 2mm or 3mm acrylic. Install a small 5V fan and connect to onboard power rails. Use standoffs for heights.
Use the typical print settings for a gridfinity block
The stand for my Surebonder dual temp hot glue gun broke so I designed a new one. Supports are needed underneath the tab. I recommend printing this in petg. Don't forget to like and post a make.
