Counting matching models…
Print & replace orignal Print in PETG or PC Weight in PC is 5.3g tested and works fine Please leave a like if you downloaded it :-)
Wheeliebot - w/ Code Small selfbalancing bot. RC-controlled can jump This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code…
only dupont connectors needed remove the plastic and bend the pins accordingly(2mm between pins at the end) the pins should stick out about 1~1.5mm out from the surface if you can't make this just buy this…
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.
Wall mount for Ninebot ES2 Scooter. Can be attached with strong double-sided tape or screw into wall. I would recommend resting the scooter front wheel on the ground and use the mount to brace the scooter to the wall. **** I would not…
Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.
Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…
Accessories for Beebot robot. Make your BeeBot/BlueBot draw
A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…
full twist throttle for your ninebot scooter
My kids are huge fans of BattleBots and inspired me to create a set of toys that they can be a bit rough with without fear of breaking the more expensive Hexbug toys. All “pins” are sections of 1.75 standard filament snipped to length.…
infill:30-100 supports: yes brim: optional walls: 2-4
This Gluebot cup is a holder and carrier for the 16oz Gluebot and several glue brushes. It is designed so as things are very unlikely to come out while carrying. As shown in the video
JREV Floor Extension
I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…
I made this for my son after the first Astrobot game. After the success of the new game I thought someones kids might al
I used Sainsmart TPU with some supports in the right places (paint on supports) - easily removable. The second model uploaded is for the M10 GPU and I've updated the model for easy antenna Install / removal. I made a cut at the back of…
This is a simple, fully 3D-printable charging port for the Ninebot G30/G2, designed with flexibility in mind. You can choose between versions that accommodate an XT60 connector with or without a button, depending on the file you select.…
Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…
Ninebot G30 Spacer is used to install a bigger battery in the battery compartment. This is my version with 7mm walls. If needed you can grind down the top siderails where the spacer is mounted for even more space. Perfect for…
Rear Axle Bracket as reinforcement and for 125mm axle drop out motor brake disc mount adapter
This model was ripped straight from the Fallout 4 game files. I've included two versions. One is subdivided and one is the original file.
DO NOT REPOST ANY PART OF THIS MODEL WITHOUT PROPER ATTRIBUTION! FOLLOW THE CREATIVE COMMONS ATTRIBUTION NON-COMMERCIAL SHARE-ALIKE LICENSE TERMS! USE THE REMIX BUTTON! This was more of an experiment to see if I could create such a thing,…
I did compete with this robot in four full combat competitions so far. Attesa performed (imo) really well and was able to use the shield and the spikes effectively. The speed, combined with the grippy tires, makes driving a lot of fun.…
Disclaimer: These could be used as a permanent solution, however because there's nothing stopping the duct from clamping onto the prop you will almost certainly be blowing props whenever you bump things. As pictured it was printed in…
This a new design but I drew inspiration from Ninebot G30 AirTag Hook by mhaehnel | Download free STL model | Printables.com . The screws line up a little better and I have included the step and fusion files in case you want to modify or…
Original Antenna mount by "lukaskroll" on Thingiverse. I have modified one of his models to accommodate the GM10 Mini v3 GPS.
The parts "Clip", "main-short" and "crew" are from the original model of the author PlasticBarista I designed a new "jaw" part because I had already broken the original model several times. It has two holes for 6mm aluminum rods. Hardware…
This was a fight against a flipper with titanium top armour. ONI can both, do damage and control his opponents quite well. Weight: ca. 223g Size: fits 150x150 square I printed the chassis and side armour in 95A TPU. The top plates, glider…
I love our Ecovacs Deebot N8 Pro with Auto-Empty Station as it's great for cleaning up our dog's hair that they are constantly shedding. However, I noticed that frequently the debris it picked up would not be removed from the bin by the…
These models extend the handlebars of a G30P 25mm for better control. For use with stock grips. This update vastly improves rideability of the scooter. Snug fit, will require a rubber mallet and finesse. I suggest printing more than two.…
Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…
This is two turtlebot3 (Burger and Waffle) waffle plates able to be printed together. The 3mf file is included because it can be difficult to print well. Support enforcers are used. Printed in PLA .3mm layers.
Didn't like the drum that came on my hexbug minotaur rc toy so I drew up and printed a new, more effective drum. Larger diameter, more bite, three teeth, and most importantly this one is actually balanced. Took a few variations to get it…
Introducing ButterBot/PurposeBot: Your Existential Desk Toy with a Secret Twist Ready to explore life’s big questions with your very own ButterBot? This fully articulated, 3D printable robot offers endless creative possibilities, all…
While I was trying to pull off the brushes on my Ecovacs Deebot OZMO T8+ I accidentally broke the green gear+arm that the brushes snap onto. I was bummed out until I remembered I could design and print a replacement part to fix it! I took…
A practical modification for your e-scooter
From thumb throttle to hand throttle
Pi Pico Sumo/Battlebot using a Wukong RP2040 breakout board. This is a working progress, so for now, here are the print files for the chassis and the 8T (16T including both sides) and some basic control over WIFI. Using a web browser, the…
For Ninebot Es1 Es2 Es3 Es4 kickscooters.
This is a remix of the Bar PLAntweight 150g by Sas_nz which is based on the CRNZ Ant Weight Combat Robot Kit . Modifications I made: Modified mounts for the N20 / N10 gearmotors, so no need for the CRNZ faceplate mounts Removed some walls…
I modeled this handle to carry this scooter more easily by one hand, if mounted as in photo, its quite balanced. If you want, you can print one piece of “Handle clamp hole” so you can carry your allen key here as in photo. I've been using…
I created a clip for a Ninebot G30P electric scooter to attach a cup holder. I used one of the Rivian Cup Holder cups and added a custom flower. The flower petals and center are each separate bodies so they can be colored independently…
Handlebar Bracket for 31.8mm handlebars
Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…
AJED Rear Axle Brake Bracket for Ninebot MAX G30 This bracket is to mount a rear brake system + increasing the maximum torque transmission (It acts like a huge torque washer) Please use maximum 2mm washers on the inside, otherwise a 125mm…
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
This design allows you to hold an A1 Lidar from RPLidar to the Turtlebot3 waffle plate. The waffle plate is a module robot base platform used in the open source Turtlebot3. The attached 3mf file includes my selection of variable layer…
Safety for the Ninebot folder mechanism. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: I used archimedean chords infill to have more flexibility.
This is a remix of the 150g vert by Muffin578 . Modifications I made: Moved the motor mount to make more space for a more common BE1806 motor Modified the motor mount for the BE1806 screws Added holes to the body to mount a power switch…
i made my own rear fender for the Monorim rear suspension, the one they supply is a 2 part fender that is just horrible in my opinion. I broke min within 1 week, so i designs my own. when you print is you need to slice it in half and if…
Ninebot G30 Stealth Spacer Here we offer a few free spacers which can be 3D printed by everyone. Please note the license agreements before downloading or using these files. These spacers are NOT compatible with our aluminum floor system.…
Here I present you the new version of my large format CoreXY 3D printer known as CoreBot. The main goal was to make the built mord affordable, easier and cheaper to built.For this reason the linear rails were replaced by rollers in an…
Case used: https://de.aliexpress.com/item/1005009165100557.html?spm=a2g0o.order_list.order_list_main.40.30d95c5fX0qWQt&gatewayAdapt=glo2deu
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
I made this toy to go with my kids Hexbug BattleBot toys. The wheels don't spin as well as I'd like, but I didn't want to include any non-printable parts so I didn't design in any bearings. I recommend printing the inner rod lying down on…
Print with at least 40% cubic infill Fits in and replaces the original fender
I wanted to built a really reliable printer which is reade for the E3D tool changing mechanism, when it is finally realeased. At first I planned to built a Hypercube / Hypercube Evolution but soon found I that the design was not stiff…
The plastic hook on my Ninebot ES4 had cracked and broken off a few times too many, so I designed and printed a replacement. You will need two socket head screws M4x16mm. My personal hook is printed in 17-4PH Stainless Steel on a…
Print with 0 bottom layers 0 top layers honeycomb infill 4 perimeters
Moving the taillight. a closed mud wing.
Remix der phantastischen Ostereierdekorations-Maschine von Herbert_b1. Hier findet Ihr nur die geänderten Teile, alles andere beim Original !! https://www.thingiverse.com/thing:3431363 Geändert wurde die Montageplatte vom Stiftantrieb,…
In FPV (First Person View) drone flying, the application of positioning technology has become increasingly important. Positioning technology not only reduces the likelihood of losing the drone but also provides a stable flying experience…
Floorextension 20mm
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
Mounted with M3x5 screws + nuts
DISCLAIMER: I DO NOT ENCORUAGE STEALING OR (AND) THE USE OF THIS MODEL IN ILLEGAL WAYS, IT IS CREATED FOR RIGHTFULL OWNERS OF NINEBOT SNSC SCOOTERS THAT HAVE BEEN OFFICIALLY BOUGHT. Ninebot SNSC battery latch release key, features 2…
This is a GPS holder for the GEPRC cinebot30. The mount fits 22x22mm GPS. The GEPRC M8 and M10 have this size, and I know some other popular brands have the same size. v2 is the original model from Riley Gibson…
A miniature version made in the likeness of HUGE from BattleBots . Wheels and weapon can spin freely. Printing Need to have a pretty well tuned printer as the tolerances are tight. Print with the wheel facing down. Only have support that…
Archive of all Ninebot G2 Scans
small video preview gland TC 16х30х4,5 example: https://ozon.by/product/manzheta-armirovannaya-salnik-tc-16h30h4-5-1281241717/?__rr=1 https://youtube.com/shorts/HhOks5Je0Po Category: 3D Printing
Numberplate holder, needed in certain countries together with JREV Rear Fender
Complete collection of G30 scans
A clip with which you can lock the brake during transport by public transport or in the car. Through the hole you can thread a cord to attach it to the scooter. I have printed in PetG with 4 walls and in the orientation as in the last…
I am using Orca slicer! to split the model press->right klick->Split->to objects for custom cable outputs write me a dm on Telgram @Florian2OO7 join our Telegram: https://t.me/ceppchat
I have not printed it yet so please share your thoughts or experiences.
I don't fully understand the vacuum cleaner design because this part is so easy to lose and cleaner is not working without it making whole vacuum cleaner useless. Fits Ecovacs Deebot U2 in case your get lost just like mine :)
JREV Floor Extension for 16S6P configs
This is a modification I came up with for my CoreBot V2 printer to convert the linear motion system from Rollers to MGN12H linear rails. I also added a (somewhat) quick-change system for the tool head as well as support for the E3D Hemera…
This is a drop in replacement for the Deebot Omni X1 station sink. This is the part that sits in the back of the sink and prevents the dirty water pump from sucking up debree. I intent to put some fine mosquitto net on the inside of this…
We brought our 3D printed “bristlebots” to MRRF 2023 and wanted to share the files so others can make them. This is made on TinkerCad so kids can have fun designing their own feet and cases! There's a baseplate for holding batteries,…
Please note that Backyard bots at the moment only runs Ghost, a plastic ant. these designs are inspired by other battlebots we meet in competition, or concept drawings by Peyton Harrell attach parts using m3 screws and nuts
Fits original as well as aftermarket fender (I have bought mine locally on Allegro ) Printing Supports required for axle mounts Print on the flat side Use a lot of perimeters
LET THE BOT BATTLE BEGIN! Have you ever felt that no one truly appreciates the raw destructive power of your robot vacuum cleaner? Well no more! Let the world know that your vacuum cleaner means business. I printed mine in white PLA and…
I needed to mount an Oak-D-Lite to a Turtlebot3 for my PhD research, so I designed this. It uses additional screws and nuts that came with your Turtlebot3, and 2xM4 screws. The only M4 screws I had were longer, so I increased the hole…
Dvě hrací kostky k podložce pro Beebota barvy a tvary. Kostka-tvary = obsahuje tvary, které jsou zobrazené na podložce (kruh, čtverec, obdélník a trojúhelník) + hvězdu a prázdnou plochu (lze jim přiřadit libovolnou funkci). Kostka-barvy =…
Features Kibbles dispensed through the push of a button Easy to print and build Minimal electronics Happy puppers See the full build instructions over on Github: https://github.com/sbyrx/kibble-bot Update 2025-03-01: Added Arduino support…
A spare part for the Ecovacs Deebot Ozmo T8 Wheel in tpu Inner cylinder in petg
Equipped with a caliper and a little bit of sensible guessing I tried to be as close as possible to the original part.
Feel free to remix, but credit me. Feel free to comment. I almost always respond within a day or two, sometimes even on the same day. So go ahead and give me questions, comments, concerns, and ideas! What to print: One each of…
When the Segway ES2 has a battery upgrade (ES4), the balance point of the kickscooter are right at the bottom of the battery, making it hard to carry. This handle allow you to carry your segway when it is folded down. Update: Added a…
Mounting plate to mount a Raspberry Pi camera on the Turtlebot3 burger.
Ninebot SNSC 2.3/2.4 Controller Adapter for G30 Controller
This is a Remix of the Brush gear design by bonz099 for the Ecovacs DEEBOT R98/R95 vacuum robot. Since in 3D Printing we don't have to deal with constant wall thickness like in injection molding there is no reason for the grooves on both…
