Counting matching models…
Size: 82mm x 52mm x 41mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: All parts need to be glued.
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Zebra Stamp - Here is a flexible stamp with a rubber backing for ink or paint. I printed mine using the prusa slicer .3mf project file that is included. Color changes included to remake what I got if you use White PETG-Black PETG-White…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, with art of a zebra and text 'crossing"; for the earthbound equines. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A great wall art of a zebra. Do not forget to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
A cute zebra keychain. Printed with 0.2 nozzle at 0,14 layer height
Some stripes are a bit wide for vase mode, so better not to ga above .2 later height I put a version for normal printing to And one for 2 color. But i cannot test it
a cap for the end of a zebra drafix, no need for supports. i printed it in PLA on an ender 3 v2 neo.
two color printing 3 swaps color 1mm thickness top most ironing
Have some zebra blinds from Walmart but don't recall exact brand name anymore and don't see an obvious label. The end caps have a tendency to fall out unless glued in place. So I made a replacement with some slightly oversized features to…
A nice gift to give to your frineds if they are graduating this year (like last year lol). There are 2 parts, the writing and the hat. I've made 2 parts so that the prints comes out better. you can just glue the hat to the writing. I've…
Make learning algebra hands-on and engaging with this Montessori-inspired bracket expansion puzzle! This physical representation of algebra was designed for upper elementary students (grades 4-6) . The purpose is to use physical shapes to…
I love the old PC game, Crimson Skies. It's fun finding an already great model and adding some additional detail for larger prints with 2 different canopy options. Optional nose cone without guns. I am not a designer, just a hobbiest that…
คำถามสำเรจแลว 3D Printed Cute Animal Toys for Kids This collection of adorable 3D-printed animal figures is perfect for kids and designed by YAMSASO DESIGN , also known as KRIT YAMSASO . The collection includes a variety of charming…
Capture the distinctive beauty of the plains with this 3D printable STL model of a Cute Zebra Standing. This charming equine is perfect for adding a touch of wildlife wonder and striking pattern to your displays, dioramas, or miniature…
Human Vertebrae Tealight Holder – Spine-Chilling Glow for the Season of Shadows Summon the spirit of Halloween with this eerily elegant tealight holder, sculpted in the likeness of a human vertebra. Equal parts macabre and mesmerizing, it…
Some stripes are a bit wide for vase mode, so better not to ga above .2 later height I put a version for normal printing to And one for 2 color. But i cannot test it
I love the chocobo ornaments at the starlight celebration in final fantasy 14. I decided to create a 3D model. Highly recommend printing the different parts in the colours they're supposed to be. You will need some glue to keep it…
Customizable pen holder for Zebra Mildliner pens. The bottom of each opening is felt-lined to cushion pens as they are dropped in. The base has room for weights for nicer feel. Number of rows and columns can be customized in Fusion 360.…
Markers are held at a 45° angle and stick out ~12cm away from the skadis board. The hooks are slightly thinner than other 3d printed hooks to allow multiple holders to fit above each other, so I recommend at least 3 walls on the hooks to…
I love sharks! There's just something fascinating about these fish! :) 3mf provided. Holes for eyes should appear in print preview after slicing. No brim or supports were used to print. Easier to print than finding Nemo. :) Update: STL…
The S400 Talon Magwell is a 3D-printed magwell for the ZWQ S400 Zebra Bullpup Blaster designed by Luke Goodman at Out of Darts. Featuring a standard talon magwell with a rear paddle mag release, this part is an upgrade from the magwell…
In a rush? Hate reading instructions and want to get down to it? You need to the base, shade, and lid. The two rings are optional for free rotation of the shade while keeping the power cord to the back. Each piece is properly oriented for…
First version of Zebra Light flashlight mk3 holder for backpack (should work for mk4 as well). Works really well for PeakDesign Everyday backpack V2.
This is a parameterised (OpenSCAD) model for creating different specimen sampling trays suitable for sorting invertebrate samples from Malaise traps, pitfalls, soil samples, etc. under a microscope or camera. The size and number of cells,…
This simple yet functional weaving shuttle is designed especially for children's weaving looms. With smooth rounded edges and a lightweight form, it's the ideal tool to introduce young crafters to the basics of weaving and textile work.…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
This zebra statue uses sculpted stripe details instead of color for clean single-filament prints. Powered by MakerWorld – Image-to-3D https://makerworld.com/makerlab/imageTo3d
A Dutch National Day Celebration, OranjeFeest. ----- Portuguese Brazilian: Fiz este chaveiro para a comunidade holandesa aqui de Castrolanda, Castro, Paraná, Brasil. Eles vão distribuir para os participantes da 19ª OranjeFeest (2018) na…
Chaveiro para a campanha Compre do Pequeno Negocio do Sebrae - Brasil - #compredopequeno Category: Signs & Logos
Zebralight SC600 flat mount. Use double sided tape to adhere. IPA all surfaces and allow to flash dry before mounting.
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
This graduation cap is designed to be worn , making it a functional and fun way to celebrate a graduation. Perfect for ceremonies, photo sessions, or marking this special milestone, it combines the classic mortarboard look with…
A complete Alphabet Keychain Set (A–Z + &) with a bold zebra-style pattern 🐾 Perfect for creating your own personalized keychains, backpack tags, or gifts. Each letter is designed with a raised pattern for a clean multi-color effect.…
I like stencils. The detail you can get from these stencils is great! Mario Mushroom, Alien Abduct, Google Dino, Cool Zebra, Among Us, Hands Up, Cat Scratching. This was a request from a friend, and it turned out great! I had to share.…
This model was generated by scanning the original matching part by our Zeiss Metrotom CT Scanner at work by one of our Quality Engineers to save our IT department the cost of having to buy the whole assembly ourselves. Yes, it's a large…
Print Settings To make those "3D stripes" really stand out, I recommend these settings: Layer Height: 0.2 mm (Standard) or 0.16 mm (for even smoother transitions on the snout) Infill Density: 10% - 15% Infill Pattern: Gyroid (Best for…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…
This is the card output bin the ZXP Series 8 PVC card printer. I recently got a used one at work, but the output tray was not included. Since I don't like picking up the cards off the floor after they print, I built this based on photos…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H53 or H503 mount snaps right into the Skilhunt HB3 headband! Works with H53 and H503 series headlamps. There's is a conformal design…
A Splendid sculpture with detailed parts , a woman emerging from water revealing her intimate parts If you like my models please consider supporting me on Cults3D : https://cults3d.com/en/users/Olle3D/3d-models thank you!
gear shaft ZEBRA Print Settings Printer: FBG5 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PETG Category: Parts
This is the second part in my WIP series of 3D art for the inexpensive IKEA Sannahed frames. Do you like 3-dimensional art that interacts with the light? Do you like zebras? This is the model for you. I printed the individual segments…
The Nebra Sky Disk (German: Himmelsscheibe von Nebra ) was discovered in 1999 near Nebra, Germany, by looters. It dates back to the Bronze Age, around 1600 BCE, and is one of the most significant archaeological finds of that era. I have…
About This is for Fisher, Rite-In-The-Rain, and other retractable ballpoint pens that are designed to use a PR4 refill. I don't know if is needed in non-retractable pens like the Fisher Bullet pen. Without the adapter, Zebra F refills sit…
This is a stereo squeezebox player based on a Raspberry Pi, the components inside are: a Raspberry Pi 2 or 3 a Hifiberry audio card + a tiny amp board (or similar) or a Hifiberry Amp (or similar), Original 7" Raspberry touch screen and…
Look there is a zebra in the wild!… Oh no, it is just a plant pot. But it looks amazing! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Zebra printers use the empty spool from your last roll as the take-up spool for the next roll. If you buy a used printer, you might not get an empty spool. This solves this issue by allowing you to print a spool instead. This spool fits…
Zlomenina obratle 12. hrudní obratle po nevydařeném přistání na paraglide u 50 letého muže. Vzhledem k tomu, že se jedná o našeho dobrého přítele, který si přeje být výukovým modelem, máme svolení k zveřejnění. Model je vytvořen přímým…
A back scratcher that resembles a worm with vertebraes. A little bit complex but doable with the right config
This is a genuine, life-sized model of one of my vertebrae - one of the top lumbar vertebrae from an adult male, aged approximately 26. Specifically, it was created from an abdominal CT scan I had done in 2014. I segmented the bone from…
The Uniball Jetstream SXR-80 refill lacks the metal sleeve that the Zebra F-701 pen refill usually comes with. This adapter aims to provides a reusable and repeatable solution for the Jetstream refills to replace the Zebra refills.…
Kleiner Kühlschrankmagnet mit innenliegenden Magneten (10mmx3mm). Einfach im Prusaslicer eine Pause einfügen und die Magnete einsetzen.
A great wall art of a zebra. Do not forget to upload your makes, thanks ! I used Flux.1 AI
A great wall art of a zebra. Do not forget to upload your makes, thanks ! I used Flux.1 AI
The brain receives blood from several major arteries. Understanding which parts of the brain receive blood from which arteries is very helpful in clinical neurology. This model helps teaching and learning 3d cerebrovascular anatomy. This…
This is for the FYSETC prusa enclosure that's available here: https://www.aliexpress.us/item/3256805761945929.html Simple enough to do, but I just removed the FYSETC logo from these handles. Category: 3D Printer Parts
I designed this muzzzlebrake for 16mm OD Nerf Barrels. It can be used with the same O-Ring, used to secure a silly Scar to the barrel.
This spinal colum section was generated from a CT scan, the 3d model was generated from a DICOM file then processed into a 3d mesh and cleaned up in blender. The purpose was to print a learning spine for anesthesiologist students. Printed…
Deutsch: Das Modell ist eine Kiste für die Nietpistole “Zebra” von Würth mit den Größen M5, M6 und M8. Wie auf den Bildern zu sehen ist, passt die Pistole perfekt rein. Somit ist die Zange handlich verstaut und es fliegt nichts mehr…
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
PETG prints can be done at 100%, but fit is very tight. PLA definitely needs more than 100%. I'd guess around 101-102% should be fine.
This spool is designed to take up the ink ribbon after it has been used in the Zebra model 500 thermal transfer printer
Model is subject to change as currently I am working on something much bigger ;) The model of the first two cervical spinal vertebrae, commonly referred to as atlas and axis along with the vertebral artery. All models were sculpted in…
02.12.24: Added a second screw on the ball joint Added 4mm depth to the holder box. 03.06.26: Model is no longer available.
This is a real model taken from a TC. In this particular case it's my mum's L5 vertebra. I made a keychain out of it :D
Español: El diseño de esta pieza está pensado para poder dar un soporte adicional en los antebrazos a aquellas personas que por diferentes motivos no tengan la posibilidad de mantenerlos por sus propios medios cuando trabajan sobre una…
For the boxes, use no top layers, 0% infill! You may also need to print a test box and change the scales so the friction fit is better - I ended up making them 98% wide and 110% long to fit a celebrations choccy in :) Remixed from another…
Add a festive touch to your space with this cheerful Happy Holidays 3D printable sign! Featuring a stylish script font and decorative stars, it's the perfect addition to your holiday decor. Whether displayed on your mantle, desk, or as…
Meine Tochter hat sich einen Webrahmen gebastelt, aber wir haben keine passende Nadel für die Wolle gefunden. Dann haben wir kurzer Hand eine gedruckt. So konnte Ihr Projekt nach einer kurzen Pause weitergehen.
Animals celebrate New Year: ferret, teddy bear, snake (10 cm), toppers (two colours)
A nice gift to give to your frineds if they are graduating this year (like last year lol). There are 2 parts, the writing and the hat. I've made 2 parts so that the prints comes out better. you can just glue the hat to the writing. I've…
You can do whatever you want with this, print it, remix it.
This speed limit sign is designed for birthday parties. It features a humorous speed limit number that corresponds to the birthday person's age. The sign is a fun and personal touch to any celebration, perfect as party decoration or a…
The Lover’s Vine Vase is a romantic and enchanting design inspired by the beauty of love and nature. Featuring a cascading vine motif adorned with delicate heart-shaped cutouts, this vase captures the essence of passion and elegance. Its…
In Denmark as in many other Scandinavian countries we usually celebrate birthdays with a flag on the table. This model is made to include the possibility to add numbers to match the age of the person we celebrate from age 1-99. I printed…
What have I changed: I have used Blender to smooth out models to remove the obvious appearance of polygons. I used Catmull with depth 3, Followed by Decimate to remove many unneeded polygons but keeping the same detail for the processes.…
What do you do when you have a tiny bit of filament left and nothing small enough to use it for? You make tiny sharks. Like really tiny sharks, small enough to fit on the tip of your finger even. This is the first of my mini shark series,…
Easy print. Print standing up for both cap and container. You shouldn't need any supports. You can also make it bigger to fit any other set of 4 pens. One of the files is for the lid which goes with the other file that is labeled “pen…
![Zebra Cute Animal Toys for Kids [YAMSASO DESIGN]](https://media.printables.com/media/prints/331153e1-2dcf-4df5-ab12-061b73b01250/images/10516915_229af6fb-c188-4010-be64-4859ee5f64d1_2bfefff6-dc18-4454-9e15-60761f8e2382/001.png)
