Counting matching models…
This Edelweiss model can be used to make earrings, hair clips, necklace or other beautiful accesorries. I made earrings and hair clips. If you have any questions, text me (DM). Wish you a lot of fun with my model and I look forward to see…
Psychedelic Disc for hypnotic Print watching.
Feeding a newborn can be quite taxing and the last thing you want is spilling precious breast milk. I created this bottle holder for my wife so she has an easy to reach and safe place to set down the milk bottles when she was done. I…
The iconic edelweiss flower, logo recreated in 3D Category: Outdoor & Garden
Simple Edelweiss stamping tool. If you can, print in TPU. Otherwise just print in PLA and roughen up the top surface. Best for Acrylic paint, since ink has a low viscosity.
I remixed Drizzt's (thingiverse 4079137) model because it was too tight and the lid was not closing properly, resulting in milk leaking. Also made the handles longer and closer to the bottle for a more comfortable fit. On some bottles it…
The origins felt a bit flimsy in PETG and broke after only a few uses. this one is very similar but the handle will take a bit more of a beating This handle is a remix for:…
This model is based upon the artwork of Antti Hakosaari and others. Okay, if you've gotten to downloading Vedel's Honorblade it's because you also saw Jezrien's, Nale's, or Ishar's and you wanted the whole set, but can we stop and…
Removed the hard head part of the original model. The edelweiss is sewed to my basecap.
fedelcode type 1 model i made, going off reference photos of Newport, DE , Columbus, GA , Youngstown, NY fedelcode type 1 sirens. going off The siren wiki, the rotors are 9" wide, and using this info, imagemeter gave measurements for…
When assembled with the cups or hand pump attachment, Medela's breastpump bottles tip over and fall super easily. This is a snap-on collar to the foot that helps prevent that. Prints cleanly without any support. The cutout is designed to…
This is designed with a max overhang of 45 degrees and as such should print nicely without supports. The wall thickness is 0.8mm, such that infill should not be a relevant topic. Adapt your psychedelic moments with the attached…
This model has been designed to fit Medela baby bottles as pictured. It provides a pair of handles that a young baby can hold onto while their hands are still too small to hold the bottle. It might also work with other makes of baby…
Hellboy Edel Mischrasse Key replica Scale 1:2. Ideal as a keychain for The Good Samaritan .
Medela Breastmilk bag storage. This is a heavier duty storage solution. Step and Fussion360 files included Inside Dimensions W 117mm D 172 mm H 202 mm. This is inspired by…
I've designed this turntable to fit on a standard 3/8" tripod mount. Used it on the Edelkrone Head One to shoot fotos for photogrammetry. Check out my YouTube Documentation about the process. Print instructions Category: Camera Print…
4 hole tapered and radiused carb spacer. Bores are for 650 to 750 Holley and 750 Edelbrock. Single plane intake all 4 holes intersect. Dual plane, only front to back holes intersect. PETG may be a bit too low temp depending on…
This is a 1:48 scale model of the Edelweiss tank from the series Valkyria Chronicles. I made this model to paint and display it, it has no moving parts except for the turret if you decide not to glue it. You might need to sand some parts…
Shield to attach to a Medela breast pump. The company-manufactured shields do not cater to all shapes and sizes, so a custom print was required. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports: No Notes: Print with…
Medela hospital-grade breast pump Symphony has different diameters compared against Medela commercial grade pumps. This adaptor allows you use commercial pump parts with Symphony pump Tested with Swing Maxi parts
Multicolor possible with filament change / pause at height command @0,2mm layer height: 1-10 white 11-13 black 14-16 white 17-19 yellow If its to big you can change only x and y dimensions in slicer and use the same settings.
Created with Lithophane Maker Printing Instructions: Mosaic Palette Bambu Labs AMS (If you print with another method and have instructions I can link here please message me)
This stand doubles as a barrier to prevent unintentional pausing of this Medela Freestyle pump ; i.e. it can be worn with the pump as you go about your chores at home while pumping and baby sleeps! It can be pulled down or pushed on with…
Deutsch Der Einkaufschip hat die Größe einer 1€ Münze Gedruckt in: PETG, PLA etc. Schichthohe: 0,10mm Düsen-Ø: 0,4mm Infill: 100% English The shopping chip has the size of a 1€ coin Printed in: PETG, PLA etc. Layer height: 0,10mm Nozzle…
Decoration for the slots in hardhats that usually hold ear defenders or visors. Model of a Edelweiss as the flower sung about in Sound of Music. Easy print, no supports needed. I printed it out of PETG with 20% infill - would be easier…
With all the breast pumping stuff we have for our new baby all the bottles were getting a little out of hand in both the fridge and cupboard. I designed these racks to help keep the bottles together and from falling over. Designed to fit…
Using same rotor, stator, and motor mount. New housing and legs.
HARDWARE: unknown amount - M3 by 10 screws 3x - M4 by 10 screws 1x - M4 eyebolt 1x - 8 to 8mm shaft coupler (14 by 25mm) (link below) 8x - 3/16 x 1-1/4 fender washers (Hillman H# 885521) (link below) 1x - OH SUNG microwave blower motor (a…
Got a new accu for my ebike and the threads on the frame did not fit. My frame has a oval diameter and is 33mm thick. The brackets fit on it quite well. You also need M5 screws, washers and nuts matching your frame. On the pics shown are…
My Mom wanted me to make an edelweiss cookie cutter for her. The cookies turned out really nice and with great details. Doesn't need a lot of infill, and no supports. Also be carful with scaling, it can make the blade too thick/thin.…
This is a unique and highly stylized (as well as very trippy) statue that makes for a great eye-catcher and is just a beauty to look at.
Drink holder on the battery cover of Kalkhoff pedelecs. Mounting holes are provided inside the cover, only 4 holes need to be drilled with a 2.5mm drill bit. Fixing with 4 screws M3x12. Bottles with a diameter of 65mm are suitable. My…
(Updated 2025 Version) English: This is a 3D printable molecular artwork of Mescaline (3,4,5-trimethoxyphenethylamine), a classic psychedelic compound. The model includes labeled atoms, a clean aromatic ring structure, and a stable…
Adapter to use a Vedella soldering iron with the Dremel workstation.
I made a drying and storage rack for baby bottles. V2 is for Philips Avant bottles and takes two bottles (max size 250 ml.) and two caps and teats (aka. two full bottle sets) V3 is for Medela bottles and takes two bottles (max size 250…
This adapter allows using Medela breast pump parts with a Zomee breast pump. Print it standing up, no need for supports.
Simple model that pressure fits 6 Madela breast pump bottles. Allows for less cluttered and easier storage. Printed with PLA at 15% infill. Please note one side is chamfered and one side is flat. The flat side should be on the print bed.
NoedelWorks – New Glenn (1:200) A detailed 3D printable model of Blue Origin’s New Glenn launch vehicle, scaled at 1:200 . This is my first fully self-made model. I hope you guys enjoy! Feel free to post your makes. I'd love to see your…
NoedelWorks – New Glenn (1:100) A detailed 3D printable model of Blue Origin’s New Glenn launch vehicle, scaled at 1:100 . This is my first fully self-made model. I hope you guys enjoy! Feel free to post your makes. I'd love to see your…
the weight is completly hidden inside! Any filament type, print with supports, Origanic if Possible
Dome shaped button with stylized edelweiss on top
Welcome to the majestic world of the Psychedelic Baroque Egg: its pastel spirals look like they came from a cotton-candy lab run by a baroque architect on questionable substances. It’s elegant, smooth, and curvy… basically the opposite of…
It's a bit of a hassle pumping milk to a fitting bottle but then feeding from Dr.Brown bottles for no reason at all and the ones sold on amazon come with those silly half threads that keep falling off if you bump them wrong. There's…
The model consists of two end caps left and right to give the roll ups a more polished look. There is also a joiner piece so that if you mount two blinds side by side they can look more as one piece of furniture rather than just screaming…
Replacement pivot cups for PowerDyne Thrust Plates before June 2020 (The ones that are no longer made). These have been used over several months by competetive roller derby skaters and so far proven to be a suitable replacement. There are…
I have already broken two of the adapters, and the high price of the Medela breast feeding set makes buying a new one very unattractive. Especially since it will break again quickly due to its design. Stop capitalism, repair it yourself!…
Simple salt funnel for Medelstor dishwasher. I lost mine so I had to make a new one. Not exact copy but similar in design to an original one. Fits various other dishwasher made by Electrolux, AEG, etc. Print settings are not that…
Extend the life of older breast pumps and use them with current accessories! This small adapter, which prints in a few minutes without support (standing upright), will allow to connect the new, triangular shaped, tube plug to an older…
NoedelWorks – New Glenn (1:96) A detailed 3D printable model of Blue Origin’s New Glenn launch vehicle, scaled at 1:96 . This is my first fully self-made model. I hope you guys enjoy! Feel free to post your makes. I'd love to see your…
this is a blink doorbell bracket to mount instead of a siedel doorbell button incl. fusion 360 files. The model is straight fit designed. To mount: One side must be hooked to press in the other side. Feel free to customize.
My wife was telling me her hoses kept falling off because of poor fit, so I modeled and printed these out for her. Print instructions I printed in FLEX, at max print speed of 5mm/s. I think printing faster of this small part doesn't allow…
The wrench is designed for loosening of valve head of Medela breast pumps. The valve head needs to be cleaned after every use but it gets stuck after several month of usage and I impossible to loosen without hand tools. This wrench is…
Entire thing glues together, please use a 130 motor. About 1:8ths scale. Mine uses a different, smaller unknown motor. But I made it compatible with a 130 for all of you.
(english version below) Anwendung: Das Bauteil dient als Ersatzteil für einen Edelstahl Seifenspender. Modell “Seifenspender »Boston«, Edelstahl” In dem Seifenspender ist ein Kunststoff Topf, in dem die Seife eingefüllt wird. Falls euer…
Einfüllhilfe mit Pressstempel für das Edelstahlpulverpad für Senseo Kaffeemaschinen. Randaussparungen durch den Einfüllring, damit der Deckel eingesetzt werden kann, ohne Pulver einzuquetschen. Edelstahlpulverpad:…
The wall thickness of the model is 0.8, but it's meant to be printed in vase mode, with bottom 10 layers as solid
One of the first things I wanted to upgraded on my Chevrolet Monte Carlo '76. Was the intake filter system, as well as using my 3D printer for a car project. So I came up with this design, not optimal in terms of it sucking the hot engine…
A simple adapter such that Phillips Avent bottles can be used with Medela accessories. We are deep in the Phillip's ecosystem for bottles, pumps and accessories, but our newest little one required some extra help during feedings; Phillips…
A simple stand for holding the cups for the hands free pump. It was made with the 21mm intake in mind but its not a tight fit it shouldn't matter. If it comes down to it, you can just adjust the scale to make it fit if needed. I used snug…
3D map of the city of Seville with the guadalquivir river as it passes through the city and with monuments such as the Maestranza, the Triana neighborhood, the Torre del Oro or the Cathedral of Seville. File in general STL and in Gcode…
NoedelWorks – New Glenn (1:144) A detailed 3D printable model of Blue Origin’s New Glenn launch vehicle, scaled at 1:144 . This is my first fully self-made model. I hope you guys enjoy! Feel free to post your makes. I'd love to see your…
We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer). Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 192x240mm in size You may print…
Hello everyone! I made this licence plate holder for my pedelec, because I was tired of the commercial ones breaking all the time because of vibrations. (Thats why I made it a bit bulky - Works great for 2 month now) Replacements cost 30+…
Handtuchhalter welcher zum Kleben mit Silikon an Fließen geeignet ist. Er wird mit einem 18mm Rohr bestückt was eine gängige Größe einer Wasserleitung ist.
Halter für 3 wege Edelstahl Ventil Wohnwagen Ich habe die oberen Befestigungslöcher nur mit 0.8mm gezeichtet damit die Stützstruktur nicht durch die Kabelbandhalter geht. Einfach aufbohren fertig.
A transportation cap for medela SpecialNeeds feeder. https://www.medela.com/en-ca/breastfeeding-pumping/products/special-feeding-needs/specialneeds-feeder?productId=1007 Can be printed with PLA, no Supports needed.
info for all models: supports enabled 5%+ infill
Schöner Edelweiss Picker zum dekorieren von Speisen oder Blumentöpfen. Infill 100% Layer 0.2 Speed 50mm/s PLA ANYCUBIC Filament 1.75 PLA Lila, 1KG 3D Drucker Filament PLA Präzision 1,75 mm +/- 0,02 mm Ppla 220°C Bed 55°C
This 3D topographic model represents the terrain of Medellín, Colombia, generated from a high-resolution 1-meter LiDAR Digital Elevation Model (DEM). The terrain has been processed and optimized for 3D printing, featuring a 3X vertical…
A mount clamp for attaching a pedelec battery to a bicycle frame with a 35 mm tube diameter. At least two complete clamps are required per battery. Additionally required (per clamp): 2 countersunk screws M5 x 40 (min.) 3 nuts M5 1 flat…
This is the first fully 3d printable Fedelcode mach 10 on printables (as of now)!!! This siren is fully 3d printable with any printer with a build space atleast 256mm squared! This model is easily built following the diagram, but if you…
My shield wheel was suddenly gone one day. Created a new one in Fusion360
Das ist ein Einsatz zur besseren Einteilung der Dose.
Imprimir con cambio de color base negra y letras en color blanco
I've made case for this item: https://www.bytedelight.com/?product=spectranet-internet-interface-without-case Print it in PETG for best results Cover present in two files that can be used for multimaterial print(even without MMU) or use…
Fregi laterali Panda 4x4 Sisley 100% fedeli agli originali. misure ricavate da fregi originali. ottimizzato per la stampa 3d. i fregi possono essere attaccati alla Panda con del biadesivo forte (tipo VHB) o con del silicone. al momento…
Case for K-Mouse Turbo 2017-LP mouse and joystick interface for the ZX Spectrum. Contains case, cover and reset button.
Whether you want to spin with your favourite 华人 or your favourite 犹太人 this nonsense transliteral driedel has you covered! Here are the faces: 积木 = jimu = child's toy =Gimel 嫩 = nen = tender = Nun 黑 = hei = black = Hay 心 = xin = heart = Shin
I needed a place to store the battery, the computer and the keys of my e-bike / pedelec together. So I designed this. The top needs to be glued, the arms fit very tight because i tried to make them hold w/o glue. Perhaps you need to sand…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
This is a holder for the cups of a Medela Milkpump. It can be mounted with screws or temporarily with zipties…
Connect two Symphony tubes (round connector) onto the Freestyle pump (triangular connector). Print it with the Triangular Connector on the Build Surface . This way requires zero supports . Other print settings as you please. Works fine…
Leider wird die Schüssel ohne Deckel geliefert. In TPU gedruckt schützt dieser Deckel vor dem Austrocknen von Teigen.
This is a remix of the first bottle opener except the ridge where the two pieces come together has been reduced so that there is not printing in mid-air. I printed this successfully with supports in Cura but it could probably be done…
Sencor STM dagasztó gép fedele. Sajnos az átlátszó gyári vacak hamar eltörött. Nem átlátszó filamenből készítettem így meg kellett oldanom a hátsó led fény bejutását. Kétféle verzióban készült: Sencor STM v7.stl: ez az eredeti alapján…
a simple locking mechanism for the Edelrid 19G wiregate non-locking carabiner
Holder for a tedeligo remote control. To get the remote out of the holder you can push the keyholder up. Printed in PETG; Nozzle 0,4mm; 0,2mmlayer hight; 5 layers wall, bottom, top; 25%infill; support everywhere. Printed flat to get the…
Con el logo de medellin 3d
Abstandshalter für Edelstahl Flexrohr DN20. Drucken mit entsprechenden Material (ABS,ASA o.Ä) Zur Montage werden entsprechende Schrauben (Holz/Blech) 4x20 benötigt
This striking 3D-printed relief features a vibrant, psychedelic interpretation of Santa Claus. Created using a multi-color stacked filament technique, the design showcases swirling layers of bold red, orange, white, purple, and blue tones…
Swiffer Staubwedel-Aufnahme mit Connector für Gardena Stiele. So kommt man auch in die letzten Ecken um Staub zu entfernen. (z.B.: im Treppenhaus oder sonstige hohe Decken) Beide Teile einfach zusammenstecken oder auch verkleben.
I have missed a handle for the lid of the Tatonka Multi Set - so i made one. How to fix it to the lid: Drill a 4mm hole in the centre of the lid Either use a M4 Screw with washer or a 4mm rivet (more elegant)
The Vulcan is a modern heavy-lift launch vehicle designed for improved performance, higher efficiency, and long-term mission flexibility. This printable model captures the proportions and appearance of the real rocket while remaining…
The Vulcan is a high-performance heavy-lift launcher for the next generation of commercial and scientific missions. This printable model maintains accurate proportions and includes interactive features like magnetic stage separation and a…
The Vulcan is a next-generation heavy-lift launch vehicle built for modern mission demands. This printable model offers detailed proportions and full modular functionality, including magnetic staging , a two-piece magnetic fairing , and…
Dessin parametrique, dimensions modifiables. Aucune connaissance de freecad necessaire, il suffit de changer les valeurs des cases vertes dans le tableur du fichier fourni. Entrer les dimensions sous la forme “xx mm”. Ne pas oublier “mm”.…
Not much to say... it's a T-bracket for 2020 extrusion...
