124 models
Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print instructions Category: 3D Printer Accessories Summary Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Digital File to DIY 3D print (Cover ). 5 x STL model files included for different wing size (0mm, 30mm, 50mm, 60mm, 70mm). 1 x 3MF model file (prusa slicer) Installation: I used original masso cover screw. Each screw is long enough. Wire…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside. Inside the tray, there is text and an image that says "Definitely Not A Mimic" and that's about…
Print approx. €6.02–€7.36 excl. taxPreliminary estimate for one variant
This is a replacement clip for the one that came with the qcw on my woodworker. It clips onto the 45mm framing tube at the front, for guiding the Y-axis cables. I designed it to sit nicely under the waste-board and I gave the cable…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
This is a pretty basic dice tin for storage. It fits about 2 sets of dice, so 14-16 dice total, regular sized polyhedral. It has a lid that fits on snugly, not too tight. It's sturdy and lightweight. I used a 4-colour colour shifting…
Print approx. €10.77–€13.17 excl. taxPreliminary estimate for one variant
Questo connettore può essere utilizzato in diverse maniere, ad esempio per creare una serra o un growbox ecc…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
The containers are designed to be used independently or with Gridfinity baseplates . The bottom has magnet holes for magnetized Gridfinity baseplates. The containers when fully loaded are stackable. The battery model number is printed on…
This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…
If you dont know how to import your QIDI X-Max 3 to Cura, you can use the following instructions. If you already have a 3D Printer in Cura, just go to your configuration folder . Help → Show Configuration Folder Extract the files from the…
Reasons to make a remix: Added a low-profile base to decrease minimal height to 72 mm Needed a flat bottom for an uneven surface Angular design Configurations: Low profile base + short screw: 72mm - 108mm Normal base + short screw: 80mm -…
The definition of IT-Support. Props to the Orignial, it was so good i needed to make a remix of it. Can be printed with no AMS, with just one filament change. Edit: Now with corrected spelling of Wizard.
Enjoy using these high definition files from a 3D scan I created with my Raptor 3D scanner!! Meshed with 0.06mm precision, so files will be quite large -- Simplification is recommended if you are not doing an extra large print! I will…
Descrizione Un revolver futuristico dal design aggressivo e ricco di dettagli, pensato come modello 3D da esposizione, cosplay o collezione. Il look unisce linee meccaniche, superfici scolpite e uno stile sci‑fi/gotico che valorizza molto…
GOOD LUCK PIRATE SHIP. Good luck printing it. If someone actually prints this successfully .. wow... please share how you did it. ITs hollow but thick enough to print. Has stairs going down to lower deck.
When I first got my suck it! dust boot I immediately set upon destroying it. It came free as part of a Onefinity sale so I didn't realize how expensive they were. After looking for a suitable replacement boot to buy I quickly noticed that…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
The goal for this design was to easily access my tape but also don't waste a ton of material. Based on that I made a modular system which can be expended by once preferences. You just need two end pieces and can add a unlimited number of…
🧩 Decorative Miniature Display – Hexagonal Design Here’s my creation: a modular hexagonal display stand, specially designed to showcase miniature cars with both style and organization. Each module has a lightweight structure—only 8.4…
This model gives you the opportunity to test the retraction and the dimensional accuracy. The left tower has an hexagon section (distance 10 mm) in order to check dimensional accuracy in various standard angle. The right tower has a round…
probe holder for the Onefinity CNC PLA Print as is no supports needed Pictures shown are at 0.28 µm layer height 2 walls / 15% infill
This is my model of the Efini Badge used on some special editions of the RX7. It should be to scale as well. Print on whatever detail you like i found 0.4mm nozzle with .15 layer height to work well. No brim or supports needed. if you are…
Custom designed Suckit dust shoe (dust boot) arm(s), specifically for the Onefinity CNC, but should work for other manufacturers. This arm has been made stronger to support the larger model of dust shoe that uses a 4" hose found here:…
Replacement dust shoe for the Onefinity CNC Can be printed in one session on a small 3d printer (Ender 3) Will need additionally: Four 6x6mm rare earth magnets (please make sure to check the magnets directions before gluing them in place)…
Are you in search of an elegant, efficient, and discreet way to enjoy your favorite snuff blend? Allow me to introduce the Snuff Box with Integrated Inhaler, a fun and innovative accessory designed to deliver a flawless inhalation…
this is the definitive fan duct for your flsun Q5 , for all fan that you adopt , more restricted tolerances for a sure insert e and a best 270 degrees flow angle with 55 degrees of deviation. i recommend to use PETG or better materials,…
This model takes a rather unique approach to cooling, with the fans moved under the effector for the smallest air restriction possible and the lowest weight. Why the Orbiter 2.0? Orbiter 2.0 is a workhorse, praised for its low weight and…
My CNC machine has a dust boot on it that attaches to arms on the gantry via a magnetically coupled brackets. I broke both the dust boot and one of the magnetic brackets when I inadvertently clipped a clamp. I was able to order a…
I remodeled and added little stoppers inside the groove because my dust boot kept slipping out.
I'm not the first one to do something like this, but I did come up with this design myself. It's pretty straightforward. Print one set of brackets for each side. Mount them as shown in the pictures using #8 sheet metal screws. Be careful…
A convenient storage solution for you Onefinity touch probe. You can also print inserts for it if you'd like (file included as well) The bottom of the holder has spots to glue in a magnet so you can store the probes magnet (make sure you…
I'm revisiting this project and I remembered how low resolution the files were, so I exported them in highest quality. I didn't sort them or prepare for printing. Just a short cut, so you don't have to run CAD. Checkout:…
A simple clip that works with the metal extrusion on the sides of the Y Axis to hold a 1mm sheet of plastic or cardboard. This acts as cover to protect your rails from direct debris falling on the Y rails.
This model is a compact concentrator for refining gold from already panned material. It is designed for hobby prospectors who want to get the maximum amount of fine gold from their concentrate without tedious manual work. Simply connect a…
This is my take on the XYZ probe mount for the onefinity cnc mounted on a QCW frame. This uses two of the existing machine screws provided with the frame. Can be mounted on any of the four corners. I printed in PLA as this machine is…
Modification of original, mostly just extended the inner surface so it fit tighter, and also added the stepped larger covers for other open ends also. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
An easy-to-print item that happens to be quite versatile in retracting the lips and cheeks for dental photography
A little Back story. If you Follow Woby Design you have seen him wall mount his Onefinity CNC on a wall. But he Mounted it 90 degrees from what was recommended from Onefinity. IN doing so his X and Z were horizontal to the ground. So this…
If you are like me and destroyed one of the pockets on your Onefinity Easy ATC RapidChange automatic tool changer, you will need to 3d print these parts. The part with the 3 steel balls is not available from RapidChange so I had to model…
LAST AND DEFINITIVE REVISION of my high precision Z system with anti-wobble I focused to reduce parts quantity, BOM, and make it way more easy to implement; -Easy installation over a Stock 3.1: Same Vcore 3.1 bottom plates and screws, no…
Porta nella tua collezione un modello che punta tutto sulla qualità di stampa. Questa elegante statua elfica è progettata per esaltare ogni minimo dettaglio: dalle pieghe morbide del tessuto fino ai lineamenti delicati del volto, ogni…
I printed the model that won the “backscratcher contest”: I liked it's look, it’s a really fun design, but it isnt a really good enough back scratcher for me. So i made my dream backscratcher. Let me know what you think! Print with 0.4…
Meet the DSD: your Definitive ScrewDriver . Why? Because every insert driver out there, no matter if it’s 3D printed or commercial, has the same issue: play . Inserts always wiggle a little, and that tiny movement makes the difference…
Denon AVR Riser that raises the height of the audio receiver amplifier to enhance cooling. Works from AVR-990/3310 to AVR-X3800H and others. I noticed the AVR-X3800H now have a fan on the bottom of the chassis. Therefore on carpet it is…
This is a recreation of the (not quite definitive for what I needed) filament swatch with an added 3mm step and holes. I have also added a small washer which is exactly the right size to space out the swatches The 3rd file is a quick…
Core set only - not designed for any expansion material Sentinels Definitive was a surprise delivery on New Year's Eve 2021. I was excited to dive into it. The GtG folks were kind enough to include a token box, but my OCD still can't…
This STL is for the CNC GoPro mount and 100mm extension arm and will allow you to print it yourself. For hardware, we recommend this kit: https://amzn.to/3IO6a0l as our holder is designed to use an M5x20 bolt and M5 nut. If you want just…
This is an extension clip to attach the liquid coolant tubes to the onefinity CNC drag chain. It has a hole (badly positioned at the moment) to disconnect the drag chain. This clip can slide on top of the existing drag chain bracket and…
Hollowed to waste less resin. Designed to slot into the end of your dental slow speed handpiece - when you turn it, it can be used to remove healing abutments, TADs etc. Don't come crying to me if it brakes within the handpiece!
Overview : Gunk built up along the Y-Rail lead screws would accumulate inside the gantry and would need to be cleaned frequently. I made this wiper to greatly reduce the amount of dust and debris getting in. I can confirm this works with…
I needed to extend the boot out a bit for my 80mm spindle. To do that I had to lengthen this bracket and have it use the front and back both nuts on the boot rather than using the middle and one of the others. Thanks to motocoder for the…
A sign which explains exactly , what a Process Manager does. ;-) Adjust the size in x and y direction in your slicer if desired. It is printed in multi-color with manual filament change at layer height. If you like my stuff, then please…
this is a new model inspired by Greecher's ( https://www.thingiverse.com/thing:4878007)model for a light ring to mount on my Makita router for my onefinity cnc. Greechers model was good but didn't work for the headlight led's that I…
Homeing/Limit switch brackets for the Onefinity CNC, for use with when using a 3rd party controller which does not use stall homing. Designed to be used with proximity sensors on X/Y, and mechanical switch on Z axis. Print Settings Rafts:…
i have not tried it yet let me know how it goes
Slight remix of original, made it a bit beefier and symmetrical, as it first cnc'ed directly on the onefinity cnc itself, with a generous 1mm buffer for inner bores, that are then later milled to tolerance, adding in drill/tap and then…
I designed this mounting clamp for my 80mm spindle to be able easily take my laser on and off my CNC and allow for an independent mounting height relative to the spindle. It simply recreates the mounting points on a onefinity CNC z-axis…
Onefinity Chip Rail Guards @ MKE Gadgets #192 One at newest addition to my shop is my Onefinity CNC router. The best part of a new tool in the shop is accessorize it. And that’s what today’s video is about, as a router bit spins and…
Grasshopper definition to make basic gridfinity units. Test it and see if it works for you! 3dm and GH file are in the zipped folder.
Sound Demos … Description Introducing the Open Speaker V4. A solidly performing speaker at an insanely budget price point. It boasts a life-like audio experience with high resolution sound from quality manufacturers like LG and SOTAMIA.…
I was not happy with the spring loaded display mount that came with my Onefinity Journeyman, so I made my own that mounts on top of the table. No supports are needed and it bolts directly to the spring loaded frame supplied by Onefinity.…
Onefinity Touch Probe Caddy @ MKE Gadgets #189 In this video, I redesign a touch, probe caddy. I got the original design offer Thingiverse, but I didn’t work for me. I redesign it to fit my needs and added a unique feature. Link to…
A totally normal model tree, comes with a version that has leaves and a version without. There's nothing abnormal here, go ahead... touch it. This is designed for resin printing, and the base does not have a flat surface. If you want to…
Tried printing in PLA and using the aluminum one from Thingiverse by ThePrintKing (should be aluminum) but the flanges would crack over time so I replaced the flanges with hose clamps for holding the spindle and have got about 40 hours of…
Onefinity CNC Router Four Hacks @ MKE Gadgets #243 In this video, I show four of my latest hacks for my Onefinitiy CNC router Spindle wrench holder Router wrench holder Touch probe caddy upgrade Pendant Holder Link to YouTube Link to…
This is a refining pin hole testing board that is meant to accompany the main pin and axle hole testing board. In my case, after determining that the largest pin hole size on the main testing board was the best, but could be better if…
designed to hold 8 -¼" bits and 3 - 1/8" bits. also holds the wireless remote, wrenches, 1" surfacing bit, and an extra collet for the makita router.
LAST AND DEFINITIVE REVISION of my high precision Z system with anti-wobble with SFU1605 I focused to reduce parts quantity, BOM, and make it way more easy to implement; -Easy installation over a Stock 3.1: Same Vcore 3.1 bottom plates…
Marco diseñado para colocar placa litofania con definición de una palabra (en este caso te profe). Incluye led interior y salida para cable USB 5V. - Frame designed to place a lithophane plate with a definition of a word (in this case, I…
Here's another probe holder for the Onefinity Journeyman CNC. This one has been designed around the block and probe that came with the Journeyman model. No supports are needed if printed in the current orientation. Tested this print with…
A replacement insert foot for the Onefinity CNC Rolling/ Folding stand. The original inserts at the time of this part creation are square tube inserts that have been modified to fit inside the rounded corners of the production units.…
Simple and effective dust guard clips for the Y-rails on a Onefinity Journeyman CNC. This design is made to hold lightweight cardboard guards in a place, helping to protect the rails from dust, chips and debris during the operation. The…
Adapter to go between the Onefinity Suck It's 2.5" hose inlet to the outlet on the Hercules dust extractor vacuum. Print settings on BBL A1 0.4mm nozzle using BBL PLA Basic 4 walls 3 top and bottom layers 0.28mm layers No support needed
can be printed with standard Settings on most Printers No Support necessary! Possibly Print with MouseEars, corners can have BedAdhesion Problems on some PrintBeds
I made this tool to be used on the wall mounted onefinity CNC to hold the probe block up on the bottom right corner of your material. Please use this at your own risk as you will be somewhat close to a Sharp router bit. If you know how…
Onefinity Laser and Indicator Mount @ MKE Gadgets #193 One at newest addition to my shop is my Onefinity CNC router. The best part of a new tool in the shop is accessorize it. Today’s project we’re making a laser mount, test indicator…
Just a fun project bringing these finger puppets to life. Post your makes!
I updated these excellent and very versatile terrain making pieces in Blender to make them higher resolution and print without the faceted edges. You will need to download the base multi-barrel holder from the original listing. The…
Build plate holder for big BambuLab printers (P1S P1P X1C). With Gridfinity bottom. holds up to 7 plates plates are orineted back side down chamfered for easy inserting made wide, tall and bulky for maximal stability footprint 7x3x18…
Onefinity Cable Cover @ MKE Gadgets #246 In this video, I make a cable cover for the end of the rails on my Onefinity CNC router This cover add a clean look and keeps the cable protected. Link to YourTube You can follow me: Printable…
A simple tray designed so a set of two will hold all of the base game tokens for Sentinels of the Multiverse: Definitive Edition. They're sized to go at the bottom of the large token box included in the game. I modified the tray from the…
Speaker Floorstand was knocked over snapping mounting plate on top of pole. Replacement bracket made to slip over mounting pole. Align bracket to speaker wire exit. Use existing screw to attach speaker to bracket. Filament: PETG Matte…
Controller and tools tray for buildbotics onefinity
osVAC M32 adapter for the Onefinity Easy Dustboot.
For all my fellow makers trying to quit smoking, or just enjoying a Vape with a need to store it properly! Holds one Elfbar ElfX Module and two 20mm Liquid bottles. Single module Gridfinity compatible, just slot it in and organize in a…
This is the final repair / evolution of my other model . With years of use the buttons give up. Designed this Bought this buttons . 6x6x5mm colour (5mm height) Printed with 95A TPU.
Not a ton to say about it, add a little bit of a lift to your Onefinity CNC machine. Source Files are free and available in FreeCAD format on my website https://nerd-sniped.com/blog/onefinity-foot/
Best way to say thanks? Post a make. Ultra-High-Definition Catan Cities & Settlements (Full-Color, Stock Size) These are ultra-high-detail, full-color Cities and Settlements for Catan , designed to stay true to the original stock…
I made this in Tinkercad for the fridge contest thingy. Credit for the name goes to @Goofball52 :) The model included 4 egg holders and one soda can holder (12 oz). Idk really what else to say here so uhh buhbye
Deutsch 🔹 Beschreibung Dieser Gridfinity Skeleton Adapter ist dafür gedacht, vorhandene Boxen, Behälter oder Oberflächen nachträglich Gridfinity-kompatibel zu machen – ohne eine massive Bodenplatte zu drucken. Statt einer vollflächigen…
This is a simple design to store any accessories or bits you use on your Onefinity CNC with their QCW Mount. It has a lid to keep the inside chip free and spots available for a circle 10mm x 2mm magnet to keep it down but is not…
Remixed to use 10mm x 2.5mm magnets. With these magnets two parts will snap together perfectly and come apart with some force. The magnets stay in their holes even without superglue although they should be glued for actual use. I'm…
