Counting matching models…
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Hello everyone! This is a kit for the X-Shot Excel Ejector Shell Blaster that allows the blaster to feed darts from a Talon Magazine. When I saw photos of this blaster before it was available, this is the modification I knew I wanted to…
i have tried every signal water powered vacuum generator printable available. non, not one works enough to work. mine does and i decided to use a shower hose connection. i measured the vacuum straight off the printer at 14 inches of…
Hello everyone! These are some alternative reticle options designed to work with the scope that comes packaged with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and while I like the scope reticle…
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
A click in place extension for the Plannja foldable rain water ejector.
For one of those few times when you need to eject your sim card. Attaches to your key chain which also locks the cover from opening.
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
Hello everyone! This is a 3D printed replacement stock designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the stock was a bit too short for my liking. So, I set out to design…
Hello! Releasing my first model for public consumption in the form of a quick deadspace filler for the X-Shot Ejector. This will require you opening up the blaster and the plunder tube assembly, but the part friction fits with the system.…
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
This print expels a nespresso pod instead of the bucket that comes with the machine that gathers the pods in the back. Machine Type: Nespresso Vertuo Plus Deluxe Coffee and Espresso Maker by De'Longhi.
The finger type piece for ejecting the shells might need a bit of sanding to fit into the pump grip and will require to have the pin fitted in to it the shell ejector has been smoothed to interface better with the finger and this model…
This is a ejector pin that I can keep safely nearby, Preferably on a keychain
This is a REMIX of @MelBlaster_903261 's Barrel Mod. This REMIX moves the barrel closer to the bolt and adds a tighter squeeze to the dart. There is an added collet to the front of the barrel holder as well to secure the barrel better and…
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
Dust Ejector Valve CH20 CH22 CH23 CH25 CH640 CH670 Replace 2446207S 24-462-07-S 11065-7008 6655938 K1211-82340 Used on many model. If you don't know what it is, you probably don't need it. I was too cheap to order replacements for my skid…
Summary This is a stackable rack for the 70.5mm diameter type A container in the AxioT system with ejector buttons per 2U of rack space. Unit Type This rack fits the A705 container variant with a unit length of 6mm/ U and provides 24U of…
Summary This is a stackable rack for the 70.5mm diameter type B container in the AxioT system with ejector buttons per 2U of rack space. Unit Type This rack fits the B705 container variant with a unit length of 7mm/ U and provides 24U of…
Material PLA Layerhöhe 0,25 mm / Infill 20 % / Support 5% Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / 2 / M6x20 mm DIN933 Mutter / nut / 2 / M6 DIN934 Gutes Gelingen und über ein Like würde ich mich…
Note: This is a prototype and may lack the fit and finish that is desired I was inspired to start this project when seeing a commercial for a slim credit card wallet. The advertised product had a neat lever that ejected card for quick…
Simply Dillon case ejector. Works with or without additional plate bearings. Also required M4 screw and nut. UPDATE: added "stronger" version 1.3 for weaker materials. If you are going to print using quality PETG v.1.2 is ok. ANOTHER…
Another Stagg EKG Kettle elevator to offer space to put your scale under. I had trouble getting my lovely little Normcore scale out from under the original model so I added this optional sliding bar. To use scale ejector: You need to grab…
No supports or brim needed. Development notes: Inkscape was used to convert an image into an SVG file Imported SVG as Grease Pencil into Blender To Do: Update the cutout (center) with fewer vertices. Not on the model - update the text so…
The shipping dewar positional cooling device (SDPCD, known as the ‘Cajun Ejector’) is a 3-D printable device that can assist cryopreservation with various standard cooling rates by use with existing standard shipping dewars. Efforts in…
The shipping dewar positional cooling device (SDPCD, known as the ‘Cajun Ejector’) is a 3-D printable device that can assist cryopreservation with various standard cooling rates by use with shipping dewars. Efforts in development of…
Nice little sigaret container with a sigaret ejector on both sides. I printed mine out of PC but most materials will do, but i noticed that PLA isn't stiff enough to eject a sigaret without the ejector deforming. After printing you need…
I noticed the ejector was just a bit too small and it prevented 5x elite silly shells from firing. Now it's widened a bit so they should fire no problem! (If a bit weak… because its just a pilot plunger volume)
Ejector with threaded fittings and mounting plate. compressed air inlet: ¼'' outlet: 3/8'' media inlet 6.1 mm for pushlock tubing.
This is an old design, but figured I might share it. The can crusher by ColgS3b is nice, but I noticed sometimes, depending on how the can crushes, it can get stuck. So I modeled this up to be inserted through the bottom to help eject the…
This is an open Beta testing model for a replacement to the stock poop ejector. The original stock poop ejector has a tendency to bend, or lose alignment which can cause the nozzle to get stuck causing belt skips and breaks at the ceramic…
The lower holder is very difficult to remove. This ejector helps here Der untere Halter läßt sich nur sehr schwer entfernen. Hier hilft dieser Ausstoßer It would be nice if you post your make. Thank you
SIM ejector pin holder modeled in Fusion360 Simple to print and mount Fusion360 video:
This is the first version, it's not 100% perfect but good enough for me now, but maybe not to your full expectation :) Need some time, feedback and will do a refinement once I have some time and testing. It's good for me now Maybe it is…
Quite a few years ago as I was repairing some carburetors and I could not source this part (or the cost was $70+ so I modeled it for recreation. Recently I found this model while reorganizing my creations and figured someone out there in…
I designed this little vacuum generator, also known as an ejector, for use with a vacuum cup for robotic manipulation. Blowing air in one side at 50 PSI will generate about 5 PSI of vacuum at the side port. The advantage of using a…
UPDATE 2025-06-21 : Increase space where poop exit and added a little rib to help keep the filament inside and made it stronger. N3P mmu poop ejector for Filametrix depressor mod Make smaller, more compact poop that are easier to manage.…
My fingers can't properly pry out the USB cable on the DJI RC-N1. Instead I would have to use my nails which causes the plastic on the cable to get scratched and damaged. So I designed this pry tool which allows you to quickly and easily…
WHAT DO YOU NEED 1pcs Printed SIM ejector 2pcs Magnets Diameter: 4mm/ Height: 2mm 1pcs Screw Diameter: M2/ Height: Suggested 7mm Print Settings Supports: Yes Resolution: 0,1mm (Required for perfect grip texture) Infill: 100%
does need supports but I have added a file with supports built in print with whatever nozzle and layer height you want
no need for supports as I've built them in print how you like, but I used .4 nozzle with .25 layer height
The phone dock by eirikso (thing:1655546) has been very good for quite a while, until my wife broke her arm and couldn't, with one hand, release her phone from the charging plug to lift it from the dock without lifting the whole dock…
Ejector for brigadeiros and sweets, Halloween pumpkin
Anyone who's has spent any period of time with an X-10 press knows all too well that jams that can occur as a result of the shell plate retainer loosening up and rotating counter-clockwise every so slightly. This rotation repositions the…
The original hex bit holder is excellent, with the springing retainer, and tight fit. But, some smaller or slippery bits can be tough to get out. The addition of a hole at the bottom allows them to be poked out with a hex key, nail, or…
This is a simple tool for getting a tile out of my tile cutter cleanly. Used in conjunction with:…
I've made this because though Jake's shell catch for the goblin was a cool innovation, I've had very mixed results when it comes to the shells sealing with the muzzle. I had the same issues with this silly-booster. I've found the ejector…
Drawing and F3D file available in case your tool has different sized tines. These are designed for this Manual Core Aerator Lawn Tool which is no longer available online. Print wedge side down at 100% infill with PETG or similar durable…
Ejector for brigadeiros and sweets of Our Lady of Aparecida size 30x35 mm
It's just a simple microSD card ejector tool that I made from scratch this morning. I hope it works for you!
For one of those few times when you need to eject your sim card. Attaches to your key chain which also locks the cover from opening.
I added a slight .4mm ridge to the top corner of the ejector catch to help with the little bit of play I had that was allowing the shell sled to trigger or slip during prime. .4mm option and .5mm option. See pictures of the sketch to see…
An extension of the Automatic Print Ejector . Uses a laser to detect when the prints have been successfully removed. Project Documentation Category: 3D Printer Accessories
My Vileda ProMist MAX ejector broke, so instead of throwing it in a dump, I decided to make a new switch. to change the part 1- unscrew the 4 screw in the mop 2- Take out the old part by sliding it out while pressing the big spring in the…
Remix of Frankford Arsenal X-10 Case Ejector Guide
this is a great model by the OP. I'm just trying to make it smaller...
Minimalist anti-loss case for the Motorola Edge 50 Neo SIM eject tool. Press-fit assembly – no adhesive required. Recommended layer height: 0.2 mm.
great models for the RC community. Thank you
Hello everyone! This is a 3D printed replacement stock designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the stock was a bit too short for my liking. So, I set out to design…
Hello! Releasing my first model for public consumption in the form of a quick deadspace filler for the X-Shot Ejector. This will require you opening up the blaster and the plunder tube assembly, but the part friction fits with the system.…
These Ejector Shell... Shells are simple 3D-printed replacement shells for the X-Shot Excel Ejector Shell Bolt-Action blaster. Featuring much the same geometry as the shells included with the blaster except missing the fins and dart post,…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
This print expels a nespresso pod instead of the bucket that comes with the machine that gathers the pods in the back. Machine Type: Nespresso Vertuo Plus Deluxe Coffee and Espresso Maker by De'Longhi.
The finger type piece for ejecting the shells might need a bit of sanding to fit into the pump grip and will require to have the pin fitted in to it the shell ejector has been smoothed to interface better with the finger and this model…
This is a ejector pin that I can keep safely nearby, Preferably on a keychain
8mm spring spacer for X-Shot Excel Ejector Stretch/shrink Z dimension in slicer for different sizes
X-Shot Excel Ejector barrel mod and shell delete, with front barrel support piece Takes 16mm OD aluminium barrel, I'm using 200mm long Print the main part breech-side down with supports, print it heavy to add some weight to the blaster.…
A much needed extended barrel shroud for X-shot Excel Ejector, 175mm total length. 31mm internal diameter, fits Rev2 EX BCAR inside (with my barrel mod.) :)
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
This is a clay mold for the kids. It has ejector plate. Due to it's a big problem for the kid's to eject clay from the mold, so I added ejector plate with a button at the top to eject the clay shape. Kid's can use it as usual, no fancy.…
Used to eject sim cards. Same diameter as a paper-clip, so it can be used for things such as reset buttons on routers as well. 2 minute print, uses 0.14g of filament. I tested it and it works fine with PLA, just be careful it doesn't snap…
Files in print orientation Print Settings: "bolt": supports, high infill and wall for strength Everything else can be default You may need to glue the connector and ball if too loose, or scale down the connector if too tight. I had to…
Simple shell for the XShot Ejector Shell I modeled on tinkercad.
This is a REMIX of @MelBlaster_903261 's Barrel Mod. This REMIX moves the barrel closer to the bolt and adds a tighter squeeze to the dart. There is an added collet to the front of the barrel holder as well to secure the barrel better and…
A short stock replacement for the X Shot Ejector Shell. Ill post a picture of my own as soon as i print it Great model @Gemeneye and thanks for including the F3D file for easy remixes.
Hello everyone! This is a 3D printed replacement foregrip designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little too slippery for my liking. Plus, after…
Hello everyone! This is a 3D printed replacement foregrip designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little too slippery for my liking. Plus, after…
Hello everyone! This is a 3D printed replacement foregrip that includes a picatinny rail that is designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little…
This piece snapped on my xshot ejector when i was trying to find some limits of its performance, so I made a new piece that should be stronger. Printed flat because if you print it vertically it would likely snap in the same manner. Use…
Convert your Ejector from shells to a 5 dart inline clip!
A compact card holder wallet that holds 5 cards Print Settings Rafts: No Resolution: 0.2 mm Infill: 15 % Notes: The Button Needs Supports; everything else can print without supports Post-Printing Some parts may require sanding depending…
Tool for helping ejecting the press fit 3x8mm magnets from the INDEX tool docks. Place the top and bottom helpers on the tool dock and use a 3mm bolt (approx 15-25mm length) and a hammer to whack them out from the back.
Replaces broken ejector on Krups EA800x Original by MrBanksy on Thingiverse - Thanks PLA Pro .2 Layer height Supports required If you like, like. Enjoy!
Use instead of original ejector at Nerf Sledgefire, to get out the shells automatically. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 0.2 Infill: 0% Filament: RedLine PLA, PETG Notes: Nozzle 0.4 Wall 0.6…
