Counting matching models…
Emma is based on a Container Ship but adapted to my bathtub ships. The game play value this time is very high, just like the printing time. Many containers may be loaded and unloaded for play. This not only pleases the bathtub captain but…
For 3D printing nerds, hobbyists, and modern naval enthusiasts alike! The result of a quick weekend project, this model was inspired by the famous 3D Benchy, along with a fun facebook game from my childhood. The Aquitaine class is the…
This Case is for the MKS emmc Adapter V2.0 https://www.aliexpress.com/item/1005005614719377.html There are two different variations for the top. One with hole for the LEDs and one without hole. With hole is: mks_emmc_adapter_top2.STL…
Klemme bzw. Mini Schraubstock für kleinere feinere Arbeitenn.
Ein kleiner Verbinder um zwei Klemmen miteinander zu verbinden um breitere teile zu klemmen
Quick clamp for protective tube Klemmschelle für Schutzrohr Printing information Layer height: 0.32mm (0.6 nozzle); 0.20 (0.4 nozzle) Infill: 15% Support: none Brim: recommended I am looking forward to your Makes! :-) If you like this…
Yet Another Filament Clamp - keine fetzigen Namen, nur eine optimierte Filamentklemme! Schnell gedruckt und einfach angebracht. Kein Schnickschnack!
Generation 2 meiner Kiste. Die Hubertus-Schilder meines anderen Modells passen. Die STL-Dateien sind blanko (Ausrichtung beachten) In der 3mf-Datei sind die Schilder für Kuemmerling und Hubertus enthalten.
This is a low profile ceiling rose for pendant lamps similar to the one included in the IKEA HEMMA cord set. I like the practical design and cheap price of the Hemma ceiling light suspension, but the ceiling rose is far too big and bulky…
Diese einfache Halterung ist um die Verkabelung in meinem 3D-Drucker zu vereinfachen. Der Fokus war eine einfache und schnell zu druckende Halterung für die 221-412 Klemmen von Wago. Es ist ausgelegt für dies Klemmen kann aber in die…
Mithilfe vom WagoTower, gehören quer verteilte Wago Klemmen im Werkzeugkoffer der Vergangenheit an. Mit diesem Spender können bis zu 11 Klemmen platzsparend aufgenommen werden. Durch den Hebel an der Oberseite können diese handlich mit…
This model has been recreated to allow for a tighter fit, eliminating the rattle and movement of the original. The surface features were also changed to be a bit more printer friendly at this scale. No special print speed considerations…
I broke one of my wiremanager from my desktop, so i took the caliper and created the model. Then i redesigned it for better printabiliy, with hight strength and a nice design. You have different angles of the shape, smallest and best…
Origin: I used the letters from this model to create Name tags as little gifts. I added small holes in the capital letters to screw in a small screw hooks, which can be attached to key rings. Printing: I used a layer height of 0.12mm and…
Bust of Lemmy Kilmister (Motörhead)
I have added the brakeman's compartment to my my previous version of the FS tipo "F" ( https://www.printables.com/model/181876-fs-carro-merci-tipo-f-ghkkms-spoor-1-spur-1-gauge- ) This one is constructed identically.
I Printed this Pendant for a work colleague, I believe its to be fitted on toy bear from the cartoon series Grizzy and the Lemmings. Its approximately 1 x 1.5 Inch in size and printed rather well. Due to the small size I had to change the…
I bought a bunch of OBI (German DIY store) plissees for my windows. They're great because you don't have to drill into your windows - but the holder clips seem to break every so often. In fact, OBI has switched to metal brackets by now.…
Screw clamp for clamping screws in a vise. With this clamp you can tighten screws in your vise without damaging the thread. Suitable for shortening or reworking screws with a file or saw. It is for metrical srews M6, M8, M10 and M12. I…
New design 2025-0210 DIN rail clamps for the popular Wago 221 series. Two versions for 11 mm and 13 mm clamps How to print? 0.25 mm strength profile PETG is best PLA works to Scaling If you need higher ones, deselect uniform scaling in…
This is basically the original design by 3DZ_CUSTOM but without the back part. Therefore it can straight be used as spray stencil or wall art if you fancy
print settings: Material = PLA, ASA, ABS Perimeter = 4 or more Infill = 30% Clamp bearings as spare parts for bar tables with a tube diameter of 28mm. The bearings are constructed in two parts to achieve the greatest possible stability.…
Diese Semmeldrücker wurden in F360 erstellt (das alte Design unter Zeitdruck, da Brötchenbacken am Nachmittag geplant war, deshalb nur ein Kreis als Basis). Dieses Design wurde aber noch überarbeitet, um beim “drücken” der Semmeln die…
Some femme parts for Dummy 13. Two sets of thicker thighs, two female-reading chests, a slightly bulked-out abdomen, and symmetrical slimmed-down bicep and forearm armors. Pairs well with Dummy Smooth —that's where this post's pictured…
Introduction The original design of the “Sunquest” sundial was derived from a traditional armillary sphere, featuring an axis parallel to that of the Earth and multiple nested rings representing latitude, longitude, the celestial equator,…
Rope clamp allows eyes to be tied in a leash without splicing and without knots. Holding force for normal standard applications. You need 4 press-in nuts M3 and 4 screws M3 x 10mm I printed in PETG in 0.2 I wouldn't use PLA for that.…
Mit meine einzigartigen Fensterkein gehen deine Fenster und Terrassentüren nicht mehr durch jeden Windzug zu. Ich habe das Design an meinen Fensterrahmen angepasst, prüfe vorher, ob mein Design auch bei dir passt. Nicht vergessen:…
Going for a walk with the kid(s) is nice. Being able to bring your morningcoffe or tee with you, priceless! The cupholder is designed in two pieces: The holder - clips in place and secures itself on the frame with a hook on the existing…
Kabelklemme zum Befestigen des Kabels am Staubsaugerschlauch. Hiermit lässt sich das Kabel des betriebenen Geräts am Staubsaugerschlauch befestigen, sodass es weniger beim Arbeiten stört. Als zusätzliche Sicherung kann noch ein Gummiband…
Hinge for Building blocks. works with duplo stones. is printed in Pla with print in place, so there is no need to assemble anything! works best with 0.15mm layer hight. 180 degree rotation.
passend für 5mm Lüsterklemmen
🎸 Caricature Figurine – Lemmy Kilmister 🎸 This stylized figurine pays tribute to Lemmy in a cartoonish, caricatured style. Posed dynamically with his bass, it captures the unique attitude and energy of this iconic rock legend. A…
For now I have designed three lamp holders for the ikea hemma but I will add others ... they screw directly to the thread of the ikea hemma M40x2.5 and you can make one with a total cost of less than 10 euros. I recommend to print the…
Modified the top cover to include a small pin, preventing placement of the eMMC in the wrong orientation.
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it,…
CNC Tisch Klemmen. Nutenstein für M6 Schrauben oder Mutter. Für den Spanner. innen Sechskant Schraube M5x 20 mit M5 Mutter Handrad Mutter M6 Füllung 50% PLA
Just a simple bread roll stamp for "Kaisersemmel" Screw ist M5 x8 Diameter is 90mm Uploaded files as .stl; .step & .f3d Print instructions Unassociated tags: kaiser roll stamp Category: Kitchen & Dining Summary Just a simple bread roll…
Klemme für eine kuppelbare Einseilumlaufbahn Die Klemme ist für ein 2mm Seil ausgelegt und eigenet sich zum automatischen Kuppeln an ein Seil. Folgende Materialien und Werkzeuge werden zum zusammenbau benötigt: PLA/ PETG (ich empfehle…
Clamp for fixing a 20mm cable pipe (Installationsrohr, Panzerrohr, Kustoff-Stangenrohr) on walls or ceilings. There are two versions, one ordinary and one with support for a 10 mm c-profile-rail. Print instructions Use uv stable filament…
Nachbildung eines Hemmschuhs der Deutschen Bahn als größerer Schlüsselanhänger oder Anhängfer am Rucksack mit Flaschenöffner Funktion. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Supports: No Resolution: 0,2 Infill: nach…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Yet another one case for MKS EMMC Adapter 2.0. My goal was having finger grips and improve PCB mounting (a USB socket takes all pushing forces instead of EMMC socket).
This cable manager can be clamped to desks , shelfs or whatever you like. Holds up to three cables tight and save. Very useful. Looks amazing when printed BICOLOR. PLA is strong enough. Material: PLA Layerheight: 0,2mm Infill: 25%
My Emma Keychain Layer Change At Layer 11 Printed On A Ender 3 Neo
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
this little cable clamp ist designed to hold d = 3mm thick cables or r = 1,5mm
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Emma is 174 mm long x 50 mm high x 20 mm deep. It is made SketchUp 2015 with the Arial bold font. I print it in PLA.
Ciao a tutti, ho creato questo stemma per celebrare lo scudetto del Napoli 2022/2023. Troverete lo stemma completo in formato step ed in formato 3mf che contiene al suo interno tutte le parti che lo compongono. Infine ci sono tutti gli…
Deutsch Ich brauchte eine Rohrschelle für ein 25-mm-Schutzrohr um die Solarkabel. Ich habe die Schelle (ohne Verriegelungen) für meine Bedürfnisse (25 mm Rohr) neu konstruiert. Kein Support nötig. Ich habe mit PLA und einer 0,4 mm Düse…
This fits under the cabinet shelf for a typical EU type 25cm deep shelf / 30cm deep cabinet This fits american standard cabinets with room to spare. Typical upper cabinet shelf depth being 11.5" or 29cm so feel free to stretch the length…
Fahrrad Bowdenzug- Kabel- Klemme / Clip; Rohrdurchmesser z.B. Lenker: 22,5mm / 25mm 2x Kabel: Durchmesser 3mm; 1x Bowdenzug Durchmesser 5mm. Verschidene Bowdenzug- Kabelklemmen für die Befestigung zwischendurch. Zur sicheren Befestigung…
Printed from PETG
Kleines gabelförmiges Werkzeug um den Klemmring der PTFE Fittings zum Entriegeln niederzudrücken. Passend für Schläuche mit 4 mm Außendurchmesser. ............ Small fork-shaped tool for pressing down the clamping ring of PTFE fittings to…
The Brötje radiators use 4 plastic clips (2 on each side) to hold the metal side panels. They have to be attached to two pipes inside the radiator. They are rather tight and tend to break when removing one site panel for cleaning…
Summary Simply replace your original flat plate analemma part with this curved plate model to improve the performance & aesthetics of your existing heliochronometer sundial. Please note that this design is only compatible with…
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
The sun traces a shape in the sky throughout the year, and that shape is called an analemma. They are challenging to capture in an image, because they require a camera in the same place and orientation for an entire year, and the…
passend für 5mm Lüsterklemmen Category: Electronics
Lemmy from Motorhead. Print in 0.2 mm layers at an infill density of your choice. Make colour changes after every 2 mm of completed print (i.e. at 2.2 mm and 4.2 mm). I used grey, white, then black. No supports or brim required although…
Schlauchklemme Aquarium Presse 40X40mm Hose Clamp Aquarium Press 40X40mm Category: Household Supplies
Ich präsentiere eine Klemme, die speziell für die Arenti WLAN-Kamera entwickelt wurde, um eine flexible und sichere Montage zu ermöglichen. Diese Klemme kann mühelos am Babybettchen oder an anderen geeigneten Stellen befestigt werden, um…
Video: Guide: https://learn.adafruit.com/feather-tft-stemma-case 3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2. TFT Feather ESP32-S2 https://www.adafruit.com/product/5300 BMP280 Stemma QT…
just print and stick together ..the skull fits into a grove on its pedestal but the feet just stick on so just centre them ..standing the model up on the pedestal and just sliding the feet in under seems to be the best way to make sure…
Replacement for the screw cring to hold a lamp shade for Ikea Hemma. The dimensions resemble those of the original ring. I printed my test print with the fuzzy surface by Prusa Slicer, giving it more grip when screwing it together. The…
Two different sizes. Or just scale them up/down Print instructions Category: Organization Summary Two different sizes. Or just scale them up/down Print Settings Printer: Anet A6 Bowden Rafts: No Supports: No Resolution: 0.2 Infill: 100
The quite large lamp canopy of IKEA Hemma didn't fit our beamed ceiling, so I designed a smaller diameter (110mm) and overall size. The original cord routing screws in very well. Drawing is not fully defined, excuse for not being fully…
Mit den Kabelklemmen können die Kabel in Ihrem Zelt oder Vorzelt geschickt versteckt werden. Befinden sich lose Kabel in Ihrem Vorzelt, beispielsweise von einer Lampe? Mit den Kabelklemmen können Sie das ganz einfach an das Gestänge des…
Ich habe hier mal einen Klemmwinkel nach meinem alu klemmwinkel Konstruiert. Ich würde ihn aus ASA drucken. Nozzel 240 und 100 Bed Temperatur. Infill 25% - 50% Je nach anwendung und kraft die angewendet werden soll. Stützen Nein Info! Das…
During a renovation, I needed a reliable solution to securely, firmly, and neatly fasten my electrical cables to the ceilings and walls of the rooms. Since I couldn't find a suitable model right away, I decided to quickly design my own…
Gear Bearing by emmett on Thingiverse: https://www.thingiverse.com/thing:53451 This is model is provided as a default within Snapmaker's Luban slicer when your Snapmaker has the dual printing module. Filament: AnkerMake - PLA+ Gray -…
Original-Seite https://www.wyae.de/hardware/SpiderbeamKlemme/ Ein 10m bzw. 12m SpiderBeam Mast passt FAST in ein DN75 Abwasserrohr - wackelt aber. Mit dem Klemmring steht der Mast bombenfest. Also: 50cm langes DN75 / HT75 Abflussrohr mit…
Emma Bookmark. Created by the children of Fab Lab León. Printed with Prusament PLA
Deutsch ————— Sortiment aus verschiedenen Kabelklammern und Abdeckkappen. Endlich Schluß mit Kabelsalat und Kabelbindern. Kabelklammer - 2fach Für 2 Kabel Durchmesser bis 8mm Kabelklammer - 3fach Für 2 Kabel Durchmesser bis 6mm Und 1…
Klemmbausteine sind mit das einfachste seiner Fantasie freien lauf zu lassen gedruckt mit 15 % infill und einer 0,4mm nozzle auf 0,25 Struktur und in besonderen farben freut sich jeder coole dinge zu bauen. über likes makes und follower…
Summary Just replace your original flat or curved plate vertical analemma arm with this larger curved model and add a tilt capability to your Nodus. Please note that this design is only compatible with northern-hemisphere…
Die Klemme ist für Seile mit 2mm Durchmesser ausgelegt. Das Zugseil sollte möglichst rund sein, damit die Klemme gut hält. Ich habe für alle Teile PETG verwendet, PLA kann funktionieren, geht aber i.Z. schneller kaputt. Benötigte…
I use these terminal blocks (german: Lüsterklemme) on my custom build 3d printer and thought a case would be pretty neat and more secure. So I made these terminal cases. Since I use a modded ATX PSU for my printer and the electronics…
The model exists of two pieces. Forst print the clamp on mount. See print orientation in picture 3. Next print the cup holder. It is important to add a pause to the gcode before printing the ceiling of the cup holder slot. See picture 2.…
use for lamp or coin bank! print 0.2 if use as led lamp print with +3 wall perimeters
Cupholder for Emmaljunga Sento Max 2024 model. Printed in PETG but PLA should be fine aswell.
(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…
the sharp side goes down to 0.2mm, but i printed with a 0.4mm nozzle, and it works well. the areas below 0.4mm were just ignored in the slicer. a brim was not required, but if you have warping issues, i'd reccomend one
I loved the way the original looked but had to recreate it from scratch to make it fit on an IKEA Hemma Lamp. I also had to modify the angles to be able to fit the huge light bulb that I had. Requires superglue.
Schlauchklemme 20mm, 25mm, 30mm Danke für die tolle Resonanz >> jetzt auch die 30mm Version! Die Größen der Schlauchklemmen könnt ihr nach belieben mit den PrusaSlicer beschriften. Ein Beispiel ist mit der 30mm Version gedruckt zu sehen.…
Klemm-Schelle 25mm. Flexiebel für Klemmspannung. Nachgezeichnet von einer originalen Klemmschelle.
ReadMe.txt Festool MFT DIY Klemm Dog Anwendung: Dieser Klemm Dog kann durch anziehen der integrietren Schraubverbindung fest mit der Arbeitsplatte verbunden werden. Die Idee ist nicht neu. Beispiele finden sich hier viele. Das besondere…
i wanted a large light shade for my Led hemma light Print instructions I recommend printing with 0.6 nozzle .3 layer height due to size. 10% Infill with a low temp LED PLA will work if you are printing a full size. PC if your printing…
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
For more details, please visit the original location of the files: https://www.myminifactory.com/object/3d-print-lego-6in-emmett-minifig-10607
Einfacher halter für kleinen Verteiler aus Wagoklemmen
Hier findet ihr einen Halter zur Befestigung eines Fingerbot Plus am Bedienfeld einer Steinbach Wärmepumpe mini. Den passenden Fingerbot findet ihr hier:…
gedruckt in PLA mit 15% infill
Bodenplatten passend für Klemmbausteine wie Lego
