457 models
This is a 70 degree wedge for the Reolink POE Doorbell. It will work with the factory mounting plate. It may work with other doorbells as well. The inside could be cleaned up a bit but that won't be seen once mounted. Feel free to share,…
Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant
I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
Just a Reolink Doorbell Rain Cover. No Supports needed.
Tilts Reolink doorbell 30 degrees right or left and 15 degrees up or down. Left/Right is from the perspective of the camera. If you want the camera tilted up instead of down, choose the opposite left/right direction. Update: Added v2 to…
Bonjour, Je vous propose mon modèle de protection contre la pluie pour la sonnette Reolink Doorbell. J'y ai ajouté un “antivol” en y ajoutant une vis M2x4 à la base de la protection. Contenu: Une plaque murale avec insert pour la…
Needed some space between the Reolink Video Doorbell and the wall to hide extra ethernet cable. Use M4 screw + nut to fasten the metal holder to the spacer. Printed from PETG, with 25% infill. Fixed rain roof.
-------------------------------------------------------------------------------------------------------- These are the current mounts: Horizontal: 5,10,15,20,25,30,35,40,45 Vertical: 5,10,15,20 Dual: 5 Vertical, 10 Horizontal Dual: 5…
Remix of Reolink RLC-520 junction box without hole on the side. All cables comes from the back side in this case.
Opted not to do with the shelled design as it actually took up more filament and time to print than doing standard infill Included the f3d file incase you have fusion and want to change the angle (Sketch labeled "Sketch 2) has the angle…
IMPORTANT: This figurine has no base, so make sure to enable a wide brim in your slicer. This is essential to prevent the statue from falling or detaching from the build plate during printing! Each model is carefully print-tested. ✅ If…
Thanks to the original creator Gero for the base file I remixed here! The hole template can be found on their original model page. V2.1 added, slightly better detail
Remixed to suite my mount preferences. Changes from the original: repositioned countersunk screw holes chamfered edging smaller wall base wire routing hole is more accurate to metal mount plate Fusion 360 file included.
The model has not been tested and may need further adjustments for the face plate.
Thanks to the original creator Gero for the base file I remixed here! The hole template can be found on their original model page. V2.1 added, slightly better detail
Original camera mount for Reolink Altas PT Ultra camera is made from metal. This is plastic replacement. I did not test it in outdoor yet :-) NOT TESTED OUTDOORS yet! Use some outdoor strong fillament (PLA is really bad idea). I will made…
I designed a camera mount for the Reolink RLC-823A 16x that allows the camera to be removed quickly and without tools. The reason for this is that I mounted the camera in the window frame so that the window can be opened when needed.
I designed a custom mount to securely position my security camera near the roof, specifically for attachment to a 90mm diameter roof downpipe gutter (adjusted to 88mm for a snug fit). The mount consists of two parts: 1. Part 1 : A simple…
I've included the f3d file in case you have fusion and want to adjust the spacing. I had to space mine out 4 inches to clear my neighbor's fence. The included STL is 1" thick in total. I recommend PETG if it's going to be exposed to sun…
Opted not to do with the shelled design as it actually took up more filament and time to print than doing standard infill Included the f3d file incase you have fusion and want to change the angle (Sketch labeled "Sketch 2) has the angle…
This hood was designed to protect the body and connectors from rain and sun. It also provides a place to stash excess solar panel wire. This design is parametric and many aspects of it can easily be modified. See Parameters for more info.…
I designed this part to complete an install in an office building with a drop ceiling. The default mounting options for Reolink cameras appear to be masonry screws and/or wall anchors. The mount is designed to allow you to bolt the…
Adapters for Reolink cameras to mount them with an angle on the D20 junction box. Two versions: 18 Degree Version For Reolink Duo 3V PoE Using F -Hole-Pattern on the camera side and D -Hole-Pattern on the junction box. (F and F on both…
Use this simple shelf to put your Reolink Home Hub in and put it on a wall. The Home Hub is placed sideways to leave access to the cables on the back. It fits very firmly, while the LED indicator/button remains visible and the ventilation…
A camera mount for a Reolink Argus 2 camera to mount it to a wall.
This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble: 7x M4 heat set inserts (Ruthex or CNC kitchen) 4x M4x20 screws 3x M4x12…
This is a an adapter to allow a REOLINK 2K Battery Video Doorbell to mount to siding. In my case it's staggered Hardy Board, but it will work for any siding with a 12mm thickness and a ~7 degree angle…
We used to just screw the Reolink to a board and put that board on top of a bookcase. We did have a Berker K1 socket close to the window the Reolink was looking out of. So I went and designed a holder that could replace the cover frame of…
Wedge made for Reolink video doorbell 2K POE. Standard wedge is 15 degrees, this wedge is 37,5 degrees. The design is almost identical as the original one.
Remixed to suite my mount preferences. Changes from the original: repositioned countersunk screw holes chamfered edging smaller wall base wire routing hole is more accurate to metal mount plate Fusion 360 file included.
Capot de protection pour Reolink TrackMix POE (compatible RLC 830a) Protection de la grêle et du soleil 2 insert M5 et deux vis de M5*20 Réalisé en PETG
Capot de protection pour Reolink DUO pour protéger contre la grêle et le soleil Réalisé en PETG il faudra un vis de ce type pour fixer sur la camera https://amzn.to/4rQ5gX5
Modificación del stand para adaptarlo con el skadis T-clip https://www.printables.com/model/256896-skadis-t-clip-syste
IMPORTANT: This figurine has no base, so make sure to enable a wide brim in your slicer. This is essential to prevent the statue from falling or detaching from the build plate during printing! Each model is carefully print-tested. ✅ If…
Spacer to fit Reolink POE Doorbell to Siding I installed a Reolink POE doorbell, but my doorbell was located on vinyl siding such that the doorbell can't fit flush to the mounting surface. Functionally, that works fine, but it looks ugly.…
Creola Katherine Coleman Johnson — Buste Ce buste rend hommage à Creola Katherine Coleman Johnson, mathématicienne de génie dont les calculs ont joué un rôle essentiel dans les premières missions spatiales américaines. Figure majeure de…
This is a mount for the Reolink TrackMix PoE for a 38mm pole, which is how I have mounted it to an old satellite dish mount on the side of my house. I have used "TPU for AMS" for this as it is stiff enough to sit flush with the camera…
Hay un modelo comercial DIY del que puedes descargarte todo el software e instrucciones: https://github.com/thingpulse/docs/ Mi diseño está basado en una pantalla de 2,8 " a color y táctil, además de una placa D1 mini PRO. Las piezas son…
I used the Reolink E1 Pro camera for some time now to monitor my prints. Recently I bought the enclosure and needed a solution for mounting the cam within the enclosure. I printed it with organic supports enabled with the Reolink mount on…
I needed a tilted support. My camera is installed on the corner of my house's front wall. With this support, my camera now covers my house's front wall. I used 3x4x4 heat inserts for fixing the original support plate but you can also use…
This is a 10cm tall stand for a Reolink E1 Zoom camera. The cable can be fed in through the hole in the back and fed out through one of the holes in the foot of the stand. Can be printed without support.
A simple cable case for Reolink security camera tail cables with snap closure
The included wall plate for the Reolink video doorbell only has about a 15 degree angle so doesn't suit a corner position well. This mount will let you attach this fully in a corner while mounting to only one side. As this is outdoor, I…
I wanted a desiccant holder that could deal with the small-sized zeolite beads and preferably did have a million stop and starts when printing. After a lengthy search I was giving up and had the idea of a vase-mode print with gaps.…
I have designed the following bracket for ceiling mounting the “Reolink E1 Outdoor POE”. There is space for the network cable in the lower part. I have created 2 versions. One version with side entry for the network cable. The second…
Base pour la pose murale de la caméra Reolink Doorbell avec une surface prévue pour mettre votre nom.
This is the first version of my vertical axis wind turbine. (V.A.W.T.) This first version is completely inspired and modified by the Aeolus project. In the future I will publish other changes after carrying out the first tests of…
This is a stand for my reolink E1 Zoom Cameras, that i use to look at my printers while printing with my mobile phone or tablet. Some also server as Candle-Holders. Rotate it, to stand on its base. I printed it at 0,2mm resolution without…
Hi, this is an adapter which you can use to install your Reolink Video Doorbell WiFi on your door instead of the peephole. Push the power wires through the shaft, attach it to the reolink and attach the reolink to the adapter using 2x…
from the Original Lost in Space Doctor Zachary Smith's Aeolus 14 Umbra Communicator as seen in the first two Episode
The model has not been tested and may need further adjustments for the face plate.
Stereonet/Stereographic projection visualiser, designed for geological joint mapping. Print Settings Printer: RepRap Fisher Rafts: Doesn't Matter Supports: Doesn't Matter Infill: Some probably required Notes: the three planes may require…
Mount your Reolink Trackmix inside your soffit, allowing you to minimize it's visible footprint. Note: If your camera is mounted like mine in the soffit, the IR lights may become useless as well as the spotlight due to the splashback from…
Bust of Louisiana Creole practitioner of Voodoo. Also included are Planter Versions. Note: Some of the files are for just the bust and some files are for the Planter version. Stunning. One of my favorites.
I use this camera to monitor my 3D printer, but I wanted it to be at least level with the print bed, so I designed this stand. Available in 8 cm and 10 cm, total height is 11 cm and 13 cm respectively with a diameter of 9 cm. The stand…
Wall plate for Reolink Video Doorbell Camera (POE). Fits perfectly with the camera. When 3D-printing avoid warping. I advise the following: Turn the item 90ºZ Ironing/enable ironing 0.15mm quality PLA Print settings: skirt and brim: draft…
A single dosing hopper and bellows (remixed from wannabecoffeenerd's vario single doser bellows) for a xeoleo 600n. Category: Kitchen & Dining
Origin I wanted a box for the Ethernet cable for the Reolink Doorbell for a new house build where the drywall is not up yet. I designed this to hopefully channel any water back out of the box and wall due to the angled bottom. You'll want…
A piece to mount your reolink bullet cameras on a pole, it is designed to fit m4 nuts. You also will need a threaded bracket as the ones used to hang an anntena on a pole. A bended threaded rod in a U shape will also do the job
The model consists of two parts. The housing can be printed in white and the insert in black an
This mount is supposed to be attached using 3M tape to the boom. First position it with the protective film still on the tape to figure out where it is meant to go. I printed with BambuLabs Blue PLA that matches the blue of the Kraken…
Original camera mount for Reolink Altas PT Ultra camera is made from metal. This is plastic replacement. I did not test it in outdoor yet :-) NOT TESTED OUTDOORS yet! Use some outdoor strong fillament (PLA is really bad idea). I will made…
No-effort-November model, needed something to hold old security cameras for indoor use. Found the original and simply added a wider base. Not exactly a model I'm proud of but it gets the job done and gives these cameras a new life plugged…
Obs: This mount was primarily designed to be used with my tilt, both for desk and wall mounting, which can be found at this link: https://www.printables.com/model/1073632-reolink-e1-mount-magnet-wall-and-table-mount I have Reolink…
Reolink E1 Mount - Wall and Table Tilt Mount I like the Reolink camera for monitoring my home, but when you place it on a table or even on a side wall, the angles are not always ideal. To address this, I designed these tilt mounts to…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
For Reolink camera model RCW-811 and similar (3 holes on 70mm diam)
Simple rain cover and spacer used for Reolink Duo 3 PoE camera. Printed in PETG for outdoor use.
Reolink_RLC-510WA Wandhalter erlaubt die Montage an schmalen Balken. gedruckt mit ASA.
I wanted to rack mount my reolink RLN8-410 NVR and found the original model lacking in some areas and the dimensions were off from my exact unit (Purchased Nov. 2024). So I recreated the original footprint, resized and made it a single…
I needed to wall mount a Reolink RLN36 NVR and JH3D's solution was perfect with the only exception being it was hard to screw in as there was no easy access for my cordless drill for the bottom screw hole.
Modified bracket - added USB extension slot. Useful for USB flash firmware updates, mouse etc.
I designed a camera mount for the Reolink RLC-823A 16x that allows the camera to be removed quickly and without tools. The reason for this is that I mounted the camera in the window frame so that the window can be opened when needed.
I designed a custom mount to securely position my security camera near the roof, specifically for attachment to a 90mm diameter roof downpipe gutter (adjusted to 88mm for a snug fit). The mount consists of two parts: 1. Part 1 : A simple…
Both .stl and .3mf are attached. I printed mine using Polymaker PETG on an OPXL 5H using .4 nozzles, and .25 layer height. In addition I expanded the first layer to .25 to help with adhesion for small details. See the attached screenshot…
Print upright with snug supports .20mm so the rail slot stays clean and clear. Some E1 zooms have the mounting bracket rotated 90 degrees but this one fits mine.
Need a corner mount for my Reolink E1 Outdoor camera that mounted at the top of my Fascia boards. Upload the step file as each install may require a different reveal depth. Print Settings Printer Brand: Eryone Printer: Eryone Thinker…
This is a riser designed to bring the doorbell out even with the brick surrounding my door. It has a tapered base that fits on the doorframe which is slightly narrower than the doorbell housing. If printed on its back it doesn't require…
Reolink Duo Floodlight Rohrhalterung für Rohre mit einem Durchmesser von 27mm . https://reolink.com/de/product/reolink-duo-floodlight-poe/ modifizierte Variante https://www.printables.com/model/1192027/edit
Quick wall mount for a Reolink E1 Zoom. Print Settings Printer Brand: Eryone Printer: Eryone Thinker DirectDrive **Rafts:** Doesn't Matter Supports: No **Resolution:** 0.20 Infill: 20 **Filament Brand:** Eryone Filament Color: Matte Black…
It is my first published design, so I hope you find it well. I created it to be able to see the whole room from a highly positioned stand (tall wardrobe). After printing, just glue all the parts together. My print setup: Res: 0.25mm…
The Reolink E1 Zoom can only point 5° downward, so I designed this mount to allow mine to be aimed straight down to keep an eye on my laser cutter. It can also be manually swiveled to make it easier to aim beyond the camera's own…
Display your fossils and geological finds with elegance and stability. Perfect for fossil collectors, geology enthusiasts, and museum displays, this modular stand is designed to hold any size specimens (try printing at different scales)…
Reolink E1 Drop Ceiling Frame Mount Description: Elevate your security setup with this custom-designed fixed camera mount, specifically crafted for the Reolink E1 to seamlessly integrate with drop ceiling frames. This mount ensures a…
Printable STL and OBJ (not printable), v2 includes supports for balance. Museo Arqueologico Nacional, Madrid La Bicha de Balazote is an impressive sculpture dated to the 6th century BCE, associated with a necropolis of pre-roman iberians.…
Cover to protect reolink camera lens from rain when mounted sideways WIP!!! project abandoned atm. the model mostly fits, but not perfectly. i intended to glue it with silicone to camera
Reolink Doorbell Wedges Great for mounting the doorbell to walls that are parallel to the door. This model has the same mounting dimensions as the original wedge from Reolink, both on the wall and the doorbell itself. It includes the 4…
A camera arm designed for mounting the Reolink E1 Zoom security camera in the corner of the Prusa enclosure. I used (2) M3x6x5 heat inserts and (2) M3x6 Hex Socket Head Cap screws to attach the base plate for the camera to the arm. e.g.…
This is still a work in progress. I have not yet tested the cover in a real installation. If you use this, please post a picture of your installation as a “make”. Allows a Reolink Video Doorbell PoE to be mounted over a single gang…
Reolink Duo Floodlight Rohrhalterung für Rohre mit einem Durchmesser von 27mm . https://reolink.com/de/product/reolink-duo-floodlight-poe/ modifizierte Variante…
Human ankle with complex fracture, AO classifiacation 44B3.2 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
