Counting matching models…
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
BOX for BETAFPV ExpressLRS Nano 2.4 GHz EP1 20x20mm for M2
The Everything Presence One - https://shop.everythingsmart.io/products/everything-presence-one-kit - is an ESP32 based presence sensor, incorporating mm wave sensing technology, a PIR, a temperature/humidity sensor, as well as a light…
This is a collection of antenna mounts for the ExpressLRS 2.4 EP1 receiver from Happymodel that I designed to use in my TBS Source One frame, but I guess they work in any frame with 5mm diameter spacers. There are three options: Rear Vert…
My entry into Major Hardware's Fan Show Down S4 EP11
Happymodel EP1 2.4g ELRS antenna mount for the AOS 3.5 frame. 4mm height at the standoff mounts, gives enough clearance for the VTX antenna mount. Print with TPU, 25% infill, 5 perimeters. Bend the two halves of the mount, then bend the…
This print is a remix to the non diversity version of the receiver. This version holds both the antennas in a way that leaves less dead spots so you get better range.
The holes are 6.1mm in diameter. The distance between the holes is 25mm, and the height is 2mm. It is a build for the Mr. Croc frame, but it can also be used for other frames. Please print it using TPU filament !!!! I did in Ender 3s1 and…
Remix of the Tracer antenna mount for the QAV-S JB edition. Fits 20mm standoffs. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 25 Filament: Sainsmart TPU Category: R/C Vehicles
Hey ! Voici un petit hommage à une licence de films époustouflante, Retour vers le Futur. Voici l'affiche de l'épisode 1 sous forme de lithophane. En espérant que cela vous plaise ! Hey! Here is a small tribute to a stunning film license,…
The holes are2.9 FOR M3 OR 1.5MM FOR PT VERSION . The distance between the holes is 30X30 mm Please print it using TPU filament !!!! I did in Ender 3s1 and slice it using Cura. The design was created in Onshape." If you have any further…
https://cad.onshape.com/documents/d371584d7160c723bbf761f6/w/2f5678efad21dca11f6d6ea2/e/23b2ec25e7ee325d5a9e6f6f?renderMode=0&uiState=6613006142973974d60d759e
Tiny Trainer V2 - RX mount for EP1 or similar To be printed in TPU. Fits to the frame at the front between the camera and stack. Category: R/C Vehicles
Original eyecup and remix source kept snagging on stuff. These models only slightly protude from the viewfinder. Print it in TPU.
Small update to original version adding clearances around the USB socket to allow 90 degree right angled USB-C adaptor to be installed. This allows for rear cable entry when used in conjunction with our Adjustable Quick Release Sensor…
Hey ! Voici un petit hommage à une licence de films époustouflante, Star Wars. Voici l'affiche de l'épisode 1, la Menace Fantome, sous forme de lithophane. En espérant que cela vous plaise ! Hey! Here is a small tribute to a stunning film…
Hey ! Voici un petit hommage à une licence de films époustouflante, Indiana Jones. Voici l'affiche de l'épisode 1, Les aventuriers de l'arche perdue, sous forme de lithophane. En espérant que cela vous plaise ! Hey! Here is a small…
TPU holder for Happymodel EP1 Dual Holder 30x30mm
This is a simple expresslrs ep1 rx antenna mount for cidora SL5 V2.1 frame. And its a remix from https://www.thingiverse.com/thing:5341070 , as the original was not for cidora. So i combined the mount with cidora back bumper. Category: 3D…
Print in TPU 98 100% inflill Organic supports
Support pour RX Happymodel EP1 pour entretoise à entraxe de 30mm. Version longue et courte en fonction de l'antenne utilisée. Version courte aussi dispo pour Nano Rx
Print in TPU 98 100% inflill Organic supports
Support RX ep1 pour fixer sur entretoise à entraxe de 30mm. Dispo en vertical ou horizontal Pas encore testé donc n'hésiter pas à faire un retour.
A hinged mounting bracket for 2 https://everythingsmarthome.github.io/everything-presence-one/ EP1's presence sensor Category: Electronics
A more ergonomic and better fitting replacement for the original fader knob I printed in white PLA on the Ender 5 S1 enjoy!
JeNo 5.1" - Happymodel ELRS EP1 mounted over DJI O3
Two very simple, diminutive accent parts for the Refyne EP1 bolt action pen . I set out initially to make a simple sleeve cover for the M2.5x0.35 bolt screw head, as I've found it slightly uncomfortable to idly fidget with. While I was at…
This is a replacement blind plate if you don't use a front derailleur hanger. I've included step, stl, and 3mf files. I think this should also work with GP7360-01 but I can't verify for sure as I don't have one. I recommend printing with…
16x16mm tray for EP1/EP2. I included a version with antenna protection for the EP2, but it is untested. Feed wires through the tray and solder. Wire guides on bottom route 2 directions. Print Settings Printer Brand: Prusa Printer: Prusa…
Happymodel EP1 TXCO Express LRS receiver 3D model based on the data provided by the product page.3D model based on the data provided by the product page. Feel free to contact me if you spot errors in the model or if you have…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
This is a remix of the PCB_Mount component in @TheStockPot's Everything Presence One ceiling mount design. Assembly Instructions: Follow the assembly instructions on the original model page. The only difference is using this modified…
A hinged mounting bracket for 2 https://everythingsmarthome.github.io/everything-presence-one/ EP1's presence sensor Category: Electronics
This is a remix of the PCB_Mount component in @TheStockPot's Everything Presence One ceiling mount design. Assembly Instructions: Follow the assembly instructions on the original model page. The only difference is using this modified…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
Small update to original version adding clearances around the USB socket to allow 90 degree right angled USB-C adaptor to be installed. This allows for rear cable entry when used in conjunction with our Adjustable Quick Release Sensor…
remix of Rice Bowl's ort antenna mod that allows the use of an ep1 antenna instead. the design is also slightly simplified by combining 2 parts into one. I added endstops for the swivel, so the antenna can only rotate 90 degrees to…
