Counting matching models…
I loved the robotic hand design but I thought: why not give it four fingers instead of just one? If you have had similar thoughts then here you go. I recommend printing it rather slowly (50mm/s tops) and you should probably put supports…
In Action: https://www.youtube.com/watch?v=Ij9UewAz\_rA The Mechanism: The title of this design (almost long enough to be a Lina Wertmuller film) pretty much says everything one needs to know. It uses an independent wheel (the rotation of…
🇰🇭 សមសវគមនមកកនរជធនភនពញ បរទសកមពជ! Welcome to Phnom Penh, Cambodia! This model was created by Dany Sánchez , provided in different versions to allow for multipart printing in separate colors, and a lamp version to include a LED tea light.…
Este llavero ha sido meticulosamente diseñado y fabricado utilizando la más avanzada tecnología de impresión en 3D, lo que garantiza una calidad excepcional y detalles precisos. Puedes elegir entre dos materiales de alta calidad: PLA o…
This is the City Destroyer, an alien spaceship from the 1996 Sci-Fi movie Independence Day, starring Will Smith. The aptly-named city destroyer was a massive spacecraft used by the Harvesters in the War of 1996 to attack Earth. This…
Independence is the hallmark of the feline spirit, a characteristic as intrinsic to cats as their graceful agility and silent footsteps. Cats, with their solitary elegance, embody the very essence of self-reliance, moving through the…
This is part of our Order of Repentance Kickstarter project ! Subscribe before the campaign starts and get this model for free! https://bit.ly/-order-of-repentance Subscribe to the pre-launch page:…
This model started out as a regemented math art piece and then through twists and tweaks ended up in this organic shape. Designed to print without supports. Please "like" this file, if you collect or download it. The resin print is…
llavero para impresion facil de cambio de colores en una sola pieza ,solo tenes que realizar el cambio de capas con cualquier slicer de manera simple para el cambio de colores .
Escudo Club Atletico Independiente Category: Signs & Logos
Do you love the Gamecube controller but hate the rocking d-pad that comes with the stock controller? Does it infuriate you when you play combo-heavy games like Tony Hawk's Pro Skater and the game detecting a diagonal input instead just…
Do rámečku dostanete ePaper (e-Ink) od Waveshare i Good display s úhlopříčkou 7.5" (170.2x111.2x1.25). Tištěno bez podpěr, 0.15 mm na vrstvu (QUALITY). Záda k přední části přišroubujte šrouby M2.2x5 (otvory jsou M2), stejně tak vývojovou…
The right arm was just mirrored in Cura, I know it's a little sketchy. The BOM: BOM: https://docs.google.com/spreadsheets/d/1CpRTM5ExVKjqFqKXyHM_BEqhV6jeapgpBublu8SchCU/edit?usp=sharing A longer description will follow...
The box offers additional space for about 24 glue sticks. Printed in PETG and 0.3 mm layer height.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Latest model compatible with atomic cover: https://www.printables.com/model/1053885-atomic-fan-holder-for-sv08-bambu-style-12g-eddy-co ------------------------------------------------ Original Description: Screws into the board…
A simple holder to get my Bosch GluePen on the Ikea Skadis. It offers some space for spare 7mm gluesticks as well so that you have everything in one place. It uses one of the universal hooks ( Skadis_Universal_Hook.stl ) from CSD_Salzburg…
The original SVA-170 from Tormek is great for hatchets and small axes, but doesn't allow for bigger axes and splitting mauls. That's what this is for The photo shows a comparison between the SVA-170 and the first iteration of the model
This is the logo for "la lepra mendocina" - Independiente Rivadavia. Modelled on blender, STL and blender files provided. Please post your make! If you want to use it commercially contact me - we'll arrange something ;-)
IT3 Industries is my DBA hint the tag on the model DISCLAIMER: This project is one of hopefully many to showcase some of the technology regarding injection molding. Starting with this independent mold, the back plate is windowed in a way…
optimizado para imprimir 3 piezas y pegar, las piezas multicolor se pueden realizar con extrusor único agregando cambios de filamento o pausas en las respectivas capas
This is a redesign of the Gridfinity Faceplate for Bambu P1P by Neebick on Printables: https://www.printables.com/model/399054-gridfinity-faceplate-for-bambu-lab-p1p After trying to attach that faceplate, I realized it wouldn't…
Perfect for Independence Day -themed baking, crafting, and pottery! This set of stamp wheels and texture rollers helps you create patterns in clay and polymer clay , EVA foam, and other materials. The thinner wheels create beautiful…
Im using this on my Ideapad C340 with an "Lenovo ActivePen for Idea"-Stylus. I would assume it will also work for other Lenovo pens, please comment if u can confirm. I printed it in PLA, other filaments might be to stiff/ not stiff…
Iconic Movie Moments - Independence Day - White House Destroyed - 1996 3D printable model.
On Plazir-15, Bo-Katan Kryze and Din Djarin investigate a series of droid malfunctions. Their mission takes them to “The Resistor” - a bar which serves nepenthé to the local droid population. This drink comes in distinctive bottles. The…
It's almost Independence Day here in the US and that means it's time to dress up the Giant Snowman Fidget for the occasion. (Everybody keeps their Giant Snowman on display year round, right?) What better way to celebrate the holiday than…
Pen cap to protect the plastic tip from drops. Designed specifically for the Lenovo "Digital Pen 2", though there are multiple versions by that same name, it should work for all of them and many other 9.5mm diameter pens. Mine measures to…
Erste Schicht mit 0,4 mm gedruckt ist dünn genug, um die Halterung zwischen der magnetischen Hülle und dem iPad fest zu klemmen, festkleben ist nicht notwendig…
The following images showcase a collection of models representing the British 62nd Regiment of Foot during the American Revolutionary War. Historically, the 62nd Regiment played a significant role in the conflict, seeing heavy combat and…
I wanted to make a boat that resembled the independence class of ship that the US Navy used. I was fun to design/print.
HEX Grid -SCAD - Updated to allow Frame Wall Width independent from Cell Wall Width
My own design and idea :) Water runs through the soil and stays on the pot below the plant. Evaporating water keeps higher humidity while roots don't stay in water. If you do print it, please post your makes - it's very satisfying seeing…
Fits most vape Pens that are 12mmx130mm, and pods up to 62mm in length Easy to print and easy to assemble Vape Pen Stash to protect your Pens and Cartridges while keeping it safe in your pocket or bag! if your like me and keep loosing…
got an MSLA printer, wanted to make tiny neps. that's about it. can also be a long necked veitchii if you squint. Print instructions needs support touching build plate
You can use a socket to tighten the bolts in all the way.
I started working on a 300x300 DBOT back in 2018 as a second printer after owning my first printer (Prusa MK3) for only couple months. I figured building a custom printer couldn't be that hard, right? Well that was 2 years ago and now…
Firecracker cookie cutter
got an MSLA printer, wanted to make tiny neps. that's about it. Print instructions needs support touching build plate
בית תפילין - לכבוד יום העצמאות של מדינת ישראל Tefillin House - Israel's Independence Day. Based on: https://www.printables.com/model/1279095-tefillin-house-basic-structure-basic-template-for…
got an MSLA printer, wanted to make tiny neps. that's about it. Print instructions needs support touching build plate
Escudo del Club Atletico Independiente, diseñado en partes para poder imprimirlas por separado y con su color correspondiente si asi se desea. su armado es por encastre y se puede mejorar con pegamento. Club Atletico Independiente,…
Tick or check mark (depending on where you are from) for adding to other models or stand alone
This is a simple mount that attaches to a horizontal surface via m4 screws on one side and to the stock plastic holder for nebula pad via the stock bolts on the other. It puts the nebula pad at an angle, allowing it to be comfortably…
A case for the Aideepen Zigbee CC2531 Sniffer USB stick, it might fit other models as well. With button access.
Es un soporte de celular del equipo Club Independiente Santa Fe. son dos archivos, el escudo pueden poner la opción de cambio de filamento, empiezan en blanco y terminan en rojo, la base recomiendo imprimirla en tojo y pintar las letras.…
tried Zbrush core mini and made a nep pitcher. because i like those. Print instructions does of course need support touching build plate
The pen is retained through friction only in the first few millimeters of the main body, allowing plenty of space for the buttons in all orientations. Designed specifically for the Lenovo "Digital Pen 2", though there are multiple…
Created using a partial 3D scan of the gluepen, then that scan data was subtracted from a basic ribbed box to create a cradle. Edited 3D scan model also attached.
I had a problem with my decks splitting near the bolts. I hope this little TPU spacer will spread the load a bit. Made for Indis might fit others. It is designed to be scaled up in the z-axis in your slicer to the height you need. The…
If you have a lid riser and want to improve the ilumination of your k1, the easiest way is just stick the ledstrip on the wall of the lid riser, but this bring a problem! If you need to do a maintenance isnt possible to remove as…
Tomando como referencia la imagen del equipo de fútbol Independiente Santa Fe de Colombia lo dibujé para darle volumen y diseñar la base que recibe el celular. Por su diseño también sirve para Tablet. Se emprime en dos colores : Rojo y…
Made some cookie cutter templates for Israel's Independence Day (Yom Ha'atzmaut) - A waving flag, a static flag, and an F-16 (in honor of the fly-overs). Printed in PLA, 15 percent infill. Print with a brim if you typically have adhesion…
This model allows you to use a Light Dependent Resistor (LDR) and an ESP8266 based dev board to track your households electricity usage by counting the number of times the LED flashes on your smart meter. Most smart meters flash an LED…
Originally published here: Independence Day troop transporter scaled one in one thousand by tato_713 - Thingiverse This model was requested by Joshua Jacobson . It's a relatively unseen environment prop of the first Independence Day…
Started with an excellent tractor tire STL from Ethan Fehrman on Thingiverse, reduced the size to 45% and stacked them side by side in the slicer and overlapped them a little bit to make them appear to be one piece. Exported this assembly…
I wanted a dust shoe that could have its height set independently of the Z movement so I came up with this. Video of it in action: https://www.youtube.com/watch?v=Cq3LlhZMwkM In the STEP file are two options for the shoe. One is 3D…
When you have both spools inside the dryer with both filaments sticking out and you start printing from one side, the other one will get unspooled, making a big mess. This roller will allow one side to spin freely while the other remains…
A 5x2 Gridfinity tray for the Bosch GluPen. It features a compartment that can hold up to 50x 100x7mm glue sticks. The entire assembly fits in a small Ikea Alex drawer, which measures 56mm in height.
The keel is cast lead, so I wanted to enclose it to minimize lead exposure, and avoid drilling lead. This is case for Independence RC sailboat from Chesapeake Light Craft:…
A ~ 7" planter – designed for nepenthes, but also works well for tropical plants which like water and like drainage. Scale up or down a little. Print inverted – one definitely needs support, but the “thrifty" model does not … note that…
Holds your ePen 3 and 3 replacement caps together Print instructions does not matter, just default speed or quality settings.
Simple wall mount for the Bosch GluePen, same design as my IXO mount https://www.thingiverse.com/thing:3575733 Print Settings Printer: Spark Cube XL Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 15-20 Infill: 20%-35%…
This is a 3D printed bowtie! It's designed to be segmented. This way it can be joined by string and flex, plus you can print it in different colors. You can check out how I assembled it here: https://youtu.be/WKoOM_OGp5c Print Settings…
Impreso en Pla, el ancho es de 2mm con un diámetro de 12cm, el posavasos lo he impreso con una Ender 3 Neo venida de fabrica sin modificaciones, el modelo presenta un problema y es que ni empezar a imprimir pide un cambio de filamento, es…
This is a very small case to hold a LDR light dependent resistor in transparent PLA. The LDR goes into the ‘finger’ in the middle, it's wires bend through the slots at the sides both keep it in place and allow storing another resistor…
Handmade model of the Independent
John Hancock, Benjamin Franklin, John Adams and Sam Adams so far. Just a project idea. Feel free to contribute with other signatures if you have time. SVG is a little sketchy. Let me know if you have a source with little clearer text.…
Was Inspired by LilMikey's work on the Tronxy to create a bed system leveled independently using Magnets and M4 balls. Eventually ended up mixing bits of Simplecore, the Voron Trident, and the original rail mounting method for the 260's…
Shelf support. Easy to print. To be installed with 4 mm screw (length depends on the thickness of the side plant (side wall)). Proven model.
3 different RC Car crawler stands depending on car link distance Aim: Easy printable material efficient stand Good simplicity and stability ratio Minimal wheel to ground distance (when falling off the stand) Sufficient to carry maximum…
Update Log 24 Dec 2023 - Creation Description This is a SSE design of a small sized capsule storage, at a volume of over 21 thousand cubic millimetres! (At a maximum diameter of 35mm when fully closed) Some ideas: Electronic components…
This is an independent floating dust shoe designed for the MPCNC Primo, specifically made to fit an AMB 1050 FME spindle. It allows unrestricted movement in both the X and Y axes. The lower part of the dust shoe is detachable (using…
Main idea: - Disallow a marble to get stuck in between tracks by using a spike and gravity - Allow a marble to pass next to the top marble of the other lane by adding a sloped channel (see image) Designed for 16mm marbles but due to…
Kazakhstan flag independence day decoration. Made 2 models 1 for ornament and 1 for circle. Printed by prusa MK3 without MMU. WIth swapping filament mid print with M600 g code command
Light platform to perfectly set the scene for translucent objects. With 2 independent rgb led sequencers , powered over usb (5V). Implemented with an arduino promicro and ws2812b-led's (known as neopixel).…
I use half sized glue sticks for my glue pen from Bosch. Problem is the grip to new inserts as the new sticks tend to fall out. This cap can be inserted into the hole at the back. As the refill hole is a little bit elastic the cap can be…
This is a cap I modeled for the Vype Epen3 by Lucky Strike. I found that the capsules were sold without any cap, and that isn't hygienic. So I modeled this that fits on the capsules. I suggest you printing it with TPU, because with its…
Three-color headband featuring the shapes of fireworks rockets. The headband itself is identical to my Indy 500 headband - the rockets are swappable with the flags from that design. The rockets are designed to be printed with three…
This attachment for the Festool OF 1010 EBQ-Plus router helps keep the router aligned, when deepening an existing track, eg. the one in the wooden deck on a sailboat, where rubber is normally applied. When refurbishing a deck, you might…
This makes it possible to mount the smoke pen in the solo system when testing aspirations fire detection systems
Various electioneering materials made on a whim for Alex Dyson, Independent for Wannon , for the 2025 Australian Federal election. Use orange PLA for the best results, and don't forget to print a bunch to give them to friends, family,…
Bring strength and freedom into your space with this fierce Eagle Corner Wall Decor ! Perfectly designed to sit on doorframes or window corners, this detailed 3D print features an eagle mid-flight with a stunning wing decorated in stars 🌟…
This mammal was a dino killer, growing to the size of a wolverine and just as deadly The first specimen of this hunter was discovered in 2000, revealing in its stomach, they found tiny bones showing that this mammal hunts baby dinosaurs…
Adaptador Ergonómico de Cubiertos | Proyecto Pair 3D Este adaptador ergonómico ha sido diseñado como parte del proyecto universitario Pair 3D , con el objetivo de mejorar la autonomía y la calidad de vida de personas con movilidad…
Blocks. Easy to print. Scalable depending on what they will be used for. Countersink screw holes. Check out my other models and like them.
this is a silica gel desiccant holder that fits in the Creality SpacePi X4 Filament Dryer it takes about 37g of filament (ASA) and holds about 90g of desiccant. it fits onto the same Feet as in @evi1gasm model Some quirks in the model due…
Like the original model, but without hole for the external antenna.
I wanted to create a fake Independent Thought alarm i could attach to under my desk as a joke. So I made this. I've made a multipart version of this model that can be glued together to make it easier for multi print. I recommend printing…
Happy Independence Day to All Category: Art
Jedná se o přechodku z výdechu od nezávislého topení ve voze vw crafter. Rozměr výdechu je 210x70mm ve spodní části a horní konec má průměr 75mm. lze napasavot trubku kgem pruměru 75 a použít jako prolézací dráhu pro křečka :-) Materiál…
The door that came on my Van Ness Large Enclosed Cat Pan kept falling off, often preventing my cat from entering the enclosure (YUCK). This design is much more reliable and offers several improvement over the standard door. Features:…
Astra Vane is a sharp-witted, fiercely independent info-broker operating in the neon-drenched mid-levels of a futuristic metropolis. Known for her razor-sharp intuition and sleek, stoic demeanor, she stays one step ahead of corporate…
I needed a better servomotors tester for a project. So based on an Arduino Nano and a 1602 LCD display I made this tester. It can control up to 4 servomotors through 4 potentiometers from 0 to 180 degrees. On the display you can read the…
Independent Truck Risers made to fit new school Indys, ¼" . Custom designed for my name/ symbols.
