Counting matching models…
Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon If you like this model, please consider printing the full sized semirobot…
Remote holder for 3 remotes, with attachable inserts for multi‑colour printing Dimensions ⬝ mm ▪ Remote holder - x:120 ⬝ y:66 ⬝ z:62 Print ⬝ Profile ▪ 0.40mm nozzle ▪ 0.20mm layer height ▪ 15% gyroid infill ▪ Outer walls slowed for print…
Stand to reposition the original LCD display to the top base. Reduces the printer footprint and modifies the angle so it's easier to view and operate. Uses original mounting points of the screen too. Screen holds in place respecting…
Remote holder for 2 remotes, with attachable inserts for multi‑colour printing Dimensions ⬝ mm ▪ Remote holder - x:86 ⬝ y:66 ⬝ z:62 Print ⬝ Profile ▪ 0.40mm nozzle ▪ 0.20mm layer height ▪ 15% gyroid infill ▪ Outer walls slowed for print…
A tiny mixing tray for glue, epoxy, resin, or whatever sticky stuff you’re working with today. It has a little holding tab so you can hold it in your hand, or pinch / clamp it to the edge of a table to keep it from sliding around. Great…
If You have some nearly empty spools laying around, you can print some of these mixing spatulas with the infamous last meters. They come in handy for mixing 2 part compound adhesives, glues and sealants. I have alway some spare laying…
Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…
Features: - only 10g of filament is used - perfect for using up the remaining bit of filament - spatula snapping points are not located on the handle instead of on the tip (easy to break off too) - spatula radius matches internal tray…
FT EMS (Electronics Management System) was designed to use pretty much any board that can physically fit a designs. The single mounts that have 3 vertical holes can be mounted vertically or horizontally. The boards that have a more than 1…
NEW! Additional supportless version = 2 Versions to choose from With this 3D print, you can store your smartphone under your desk, creating more space and order on your desk. Additionally, you can store a remote control, pens, or other…
Compliant mechanism clips and clamps for use or replacement in different projects. The clip will hold things like cables, pens, tools and many others you want to have attached. Changelog 2024-12-21 v1.6 fine tuned print settings for…
NOTE: This model is designed for a US Plug shape. I needed a simple & elegant wall mount for the HomePod Mini in the bathroom. I found several models on Esty ( SmartHomeEngineering & BurdProducts ) that I mostly liked but they didn't…
This is an HomePod Mini stand, inspired by HomePod Stand by FANBOY by malencar https://www.thingiverse.com/thing:3943055 and HomePod mini wall mount by bu11wei https://www.thingiverse.com/thing:4712032 I mostly combined these two. Please…
A compact, stackable disposable mixing pad with a small integrated spatula, designed for mixing epoxy, resin, glue, and other adhesives. Quick to print and using only a few grams of filament, this model is perfect for fast workshop use…
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon Bring a bit of chaos to your collection with this 3D printable rendition of…
Die goldene Desert Eagle ist eine ikonische Handfeuerwaffe, die in dem Film "Deadpool & Wolverine" verwendet wird. Diese mächtige Pistole, bekannt für ihre beeindruckende Größe und Durchschlagskraft, ist ein Symbol für Stärke und…
Remix of the "floating" outlet wall mount for the Apple HomePod Mini, now made for European Plugs.
This is bolt action pen inspired by Chassepot 1866 needle rifle. designed for 107mm refill no glue required supports included 0.2mm layer / 0.4mm nozzle / 20% infill EDIT 3.3.2022 :New improved bolt. If you like this, buy me a beer ;)…
Remix of the Prusacaster. The core has been modified to accept an Amazon Tele kit. I filled in the hexagons to create pockets to pour epoxy into. I also added slot for square nuts to attach guitar strap posts. ☑ Build and Demo Video ☑ ☑…
Based on the Ceporah Tower, found on the island of Artaeum in Tamriel. When I first saw this building in the Elder Scrolls Online -game it got stuck in my mind and I just had to model it for printing. For reference I mostly used pictures…
Diesel depot for model trains H0 1:87 This is based on an actual railroad wagon from “L'Alliance Society An Anvers” dated 1926. I only had 1 picture to go by. The idea is they took the top of the wagon to make the depot tank. Pictures are…
UPDATE 1: Pin improved for V1 - Try Pin V1. 2 FIXED if the nebula pad is to loose with Base V1 UPDATE 2: I built a new holder from scratch (Display Base V2 + Pin V2). In V2 I fixed the problems that were present with V1 such as the wrong…
A detailed description of the project is available on my homepage (in german): https://100prznt.de/pool/skimmer-am-rechteck-frame-pool/ Print instructions For long durability and tightness of the wedge, it should definitely be printed…
You can use this tool to mix paint or epoxy with your drill.
A windstorm last year made my skeleton take a great fall, and a forearm mount was one of the casualties. I made a 3D-printable version so I can get him back up this year! Printing tips: Use PETG or a more durable material to avoid warping…
Printing in the orientation shown will create slight blemishes on the rear, but will make the arms and legs more resistant to breaking. The pupil on the eyeball is slightly raised, allowing the addition of a pause on the last layer for a…
I made this so I could mount a HomePod mini to the wall in my daughters bathroom. It can be mounted using either 2x 3M adhesive strips or screws. I've personally used the 3M strips. When printing be sure to enable supports on the back…
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
Two sizes: 70mm and 40mm diameter. Watch the Video: https://www.instagram.com/reel/CkjCa6CjjpO/?utm_source=ig_web_copy_link Like it? Please don’t forget a like any maybe a follow, thanks a lot 😊 For more Project’s and insights, see my…
This is a stand to raise the HomePod mini a little bit from the table, ground. The cable can be routed on the inside of the stand. Print instructions nothing special
Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…
Eine Klemme für die Abdeckplane unseres Pools. Gedruckt in PETG A clamp / clip for the pool cover. Printed in PETG
I like to use metal Mini Toolboxes to organize my desk and more. I desined some drop-in sidepods for the US General (Harbor Freight) and Kobolt (Lowes) versions of the mini toolboxes. You can attach add magnets (holes included) or just…
Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.
Introduction: I designed a three part wall mount for my HomePod minis. The parts are: Wall Plate: Secures to the spot on the wall where you want to mount your HomePod mini. Note the arrow indicating the correct orientation. Gripper Plate:…
Original Design by Erlbeck https://www.printables.com/social/273939-erlbeck/about Decided to print with a .8 nozzle at .6 layer height in PETG. Looks alright to me.
Most HomePod wall mounts I found had a baseplate that was actually obstructing the high frequencies of the sound when mounted overhead. So I designed this one with the smallest base possible. The HomePod holds fine on its own but you…
This is my Snap-fit REPO robot model. It is 100% printed… kind of. The joints for the arms, legs and head are made of small filament pieces which are melted on the ends to make a sort of lock pin. (Check out the picture above) For the…
This tripod is made in 2 pieces: Main Body Leg (Print 3 times) This Model can be printed without supports. I recommend the use "super glue" to glue the legs to the main body. 3D printing settings Body: Resolution: 0.2 Supports: No Infill:…
The ergonomic thumb recess provides much better control , helps keep your fingers away from the nasty, sticky stuff in the tray. Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray in horizonal…
Description I was looking for a holder/spacer for a Lifepo4 battery set based on EVE 40135 cells. So no models were found and I decided to build my own. The model consists of 2 parts: a holder with additional places for busbars or wires…
A highly efficient, heavy-duty mixing paddle designed to replace broken or worn-out commercial epoxy/paint mixers. Engineered with a multi-fin blade design to create a strong vortex, ensuring thoroughly mixed resins, epoxies, or paints…
Little r.e.p.o. guy to keep you company. Print upside down, with be easier because those feet are thin. If you don't have a multicolor printer, you could use a Sharpe for the eyes. Thank you for the support and have fun printing.
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
Model printed in PLA and PETG in Creality Print on the standard "Normal" profile. Layer height 0.2, nozzle 0.4, filling 15%. Brim and support disabled. Pins should be printed separately, Brim and support optional, but not suggested, with…
A planter that looks like a HomePod mini! Perfect for the apple enthusiast. It has a small hole at the bottom to allow water to drain. Also added a model without the drain hole.
An epoxy mixing set that consumes about 2.2m filament, good to print a few for your last meters. Updated with a version 2 with one slanted and toothed spatula in one end and a straight flat in the other. Small quality of life improvement.
Needs only approx 2m of filament (6g). Suggest to print with 6 walls to avoid infill on the spatula. One STL file with tray and spatula, can be split into individual objects in slicer.
This is a wall outlet cover that has a removable shelf for the HomePod mini. It compactly hides the cable inside and creates a nice, stable shelf for the HomePod while keeping the other outlet free for use!
I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…
Epoxy mixing spatula & spreader Combined stirrer, applicator for the Epoxy Work Station I joined the tools to make one tool instead of two. I increased the thickness of the tool ends to make them less floppy and reduced the thickness of…
This is a simple and good looking adapter to rotate orginal filament spool holder. For assembly you will need: 2x M5 nuts 2x M5x20 screws (flat head recommended) 2x M5x12 screws CA glue to fix the nut inside the hexagonal hole
small paint/epoxy mixer with Hex-rod 8mm, total diameter of the rotor is 35mm and 20mm tall. Rod is 100mm long but easly strechable if needed longer.
sharing from creators original posting on https://www.thingiverse.com/thing:6210632
epoch modular and stackable box with grided options, inserts and lid dimensions in mm: box1.1 and 1.2 ~ x: 150 · y: 75 · z: 30 with 3 different insert options box2.1 and 2.2 ~ x: 150 · y: 75 · z: 20 with 1 insert option lid ~ x: 150 · y:…
This part is meant mainly as a reference for your modelling projects of Homepod Accessories. You might be able to print this as well, but I haven't tried it myself. The outer mesh covering is something that is not yet properly done in…
This is my take on the popular Copepod hideout that hopefully aims to increase printability while maintaining a safe and accessible sanctuary for Copepods when placed in a reef tank. This is version one, and I recommend increasing…
A truly stackable, small epoxy mixing tray - perfect for using up the last meters of your filament! Ultra-light: Uses only 3.6g of filament. Ergonomic: Unique shape makes it very easy to hold and handle. Print without support.
Epoxy Resin Mud Power Mixer Blade Drill Tool / Plastic Paddle Replace Resin Mixer Drill Attachment
Hallo Ich habe ein Verladedepot / Lager / Güter-Bahnhof für die Modellbahn Spur N entworfen. Der Bahnhof kann an die eigenen Bedürfnisse angepasst werden. Ein Teil des Aufbaus kann nach den eigenen vorleiben gestaltet werden, die Pfosten…
The PokePot Just a cute small pot to hold some plants and make your room a little bit more unique. have fun :)
This is a replacement mixing nozzle for the 2K epoxy adhesive cartridges from UHU. With this glue I like to glue larger components or generally components which must be firmly bonded together. Unfortunately, only two mixing nozzles are…
Use this PIN with ' https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand ' for move stock LCD. The lock the screen with the new base.
Printed at .12 layer height with 15% infill. Material doesn't matter. Painted the raised areas with white paint marker. Handle is made from a metal coat hanger wire. Print with normal supports
Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
Layer Height: 0.15mm Support: Only needed on the hook Perimeters: 4 * Alternatively, use modifier to increase perimeters of the hook to 6-8, and 2 on the main body Material: PLA is fine, but PETG for extra durability of the hook. I enjoy…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar. Balancing wires will go out at the sides you can feed multiple balance wires through the covers to simplify the wiring. Fits these busbars:…
This is my custom design for battery holders for 38120 LiFePO4 Battery cells.These parts can be used to make any arrangement of 38120 Cells in any series or parallel configuration! For my specific project, I made a 4S 8000 mAh battery…
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…
First, I needed to reposition the LCD on an Ender 3 V3 KE. The slots and posts are reversed from the SE (the slots on the KE are on the LCD) and I was unable to find an alternate LCD mount for the KE. TinkerCAD had a hard time with…
Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…
Caja portaobjetos para el reposabrazos central de Fiat Tipo 2018-
Liked the size and shape of the original design. However the edge was too thin for mixing/spreading epoxy. The edge is now ~1mm thick. If you like to scale it to increase size, keep the overall height at 3mm to maintain the edge of the…
A design for the fine feed handwheel for a Bridgeport milling machine. I have included the Solidworks part file. I used an SLA printer but it should work fine on FDM. The handle uses a ¼-20 x3/4" cap head screw. Use a washer between the…
Epoxy mixer tray and applicator for one time use. Stackable for easy storage of larger quantities.
This is a series of mixing cups with a spout shape so that you can pour accurately without product dripping down the sides. The spout is not too big so it doesn't interfere with complete stirring. I made them for use with 2-part resins,…
This is our 3rd speaker design to date. We went way off-script with this loudspeaker, hoping to attract those with smaller build volumes and a desire for deep bass and excellent off-axis response. They pack the party animal of the FDM5's…
Developed in the summer of 2023, these 3D printed bookshelf speakers are our first attempt at properly meshing 3D printing and audio. We believe that we hit the mark! FDM5 Loudspeakers throw out an impressively wide soundstage and boast a…
A handy little disposable tray and break away stir stick for mixing two part epoxy. Hopefully it will be more useful than popsicle sticks and a scrap piece of cardboard.
This is the supply depot from starcraft 2! of course I added my own little bits too it to make it my own. the top half requires no support, but the bottom half needs a bit of support (dont put support on the ladders, they print fine…
Version 1, fits ok…
R.E.P.O ROBOT FROM THE GAME R.E.P.O
Inspired by the look of the Apple HomePod Mini and a post I saw on Reddit. Believe it or not it was designed in Tinkercad. I printed it @ .3mm layer height which I think gives the lattice pattern a nice textured look.
Hello Everyone From the beginning of using HomePod Mini, I did not like its position because the screen is not visible from a greater distance. So I decided to design a stand for it so that it would be placed in a horizontal position. I…
Simple battery box 4 280ah lifepo4 cells. Bottom and sides but no top YET. Hope it eliminates the need for banding cells. Cells are 174mm by 72mm by 207mm tall. Printed on CR6 Max with pla+.
This is a stand for you R Series Droid it nicely holds the droid and remote. I am already working on a Version 2 that will hold most of the accessories. Does not work for C Series. I am will doe one for them here shortly as well. Updated.…
Remixed to take my cells which were slightly taller. All parts included for clarity, but full credit to the original author for designing this awesome pack. Print Settings Printer Brand: Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…
Salvadanaio "Deposito Zio Paperone" stampato in due pezzi (corpo centrale e cupola) senza supporti. Misura 15 cm x 15 cm x 24 cm cupola inclusa. Materiale: PLA L'ho stampato con: altezza layer: 0,2 mm. Perimetri: 2 Riempimento 15% (però…
I made a HomePod Mini in Fusion 360 for you to use in your Designs, so you can make your own HomePod stands and accessories. I put the CAD file in the downloads as well as an STL enjoy
Model remízy v Kutné Hoře ve velikosti TT
Update: I forgot that the Ender 3 KE has a different spool stand, with an additional part that makes it incompatible with my model. As such, I've updated my model to support the KE stand. Please let me know if it's still incompatible, in…
Afin de poser une éponge pour la salle de bain par exemple (marche aussi pour une cuisine ou wc!!), voici un support a poser sur un meuble, pour maintenir l’éponge. Il est en 2 parties ce qui permet de l'imprimer SANS support. L…
Just a simple mixing stick. Enjoy. Infill: 100% Category: Replacement Parts
![Stackable Epoxy Mixing Tray [3.6g]](https://media.printables.com/media/prints/80602716-8b7f-4593-bdac-4f2ea6e558af/images/13502461_22b24bcb-4e55-4ddd-b8ca-cb3751a5364b_fda3fa44-8663-4b8f-9dbe-63d2bad1b503/img_4268.jpeg)
