Counting matching models…
Pair of salt and pepper shakers designed to mesh together and turn as gears upon their stand. The bottom is threaded to fill the shakers. Enjoy and happy printing! :-)
NO AMS, NO SUPPORTS ✅ Use glue when assembling 💧 Don't forget to give me a like 🧡 Share photos of your prints 🌶 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬
After upgrading my Fans, the Stepper Motor was screaming out for attention. This simple cover just slips-on and adds a finishing touch.
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Salt shaker in a kind of spiral design. I printed the salt shaker in PLA with a leyer hight of 1,5mm. The cap for the pepper shaker has only five holes (Model also attached). Important: If the screw cap is difficult to turn at first,…
This model is of the steel ball weapon from the anime Jojo's Bizarre Adventure. A step version is included to facilitate modification. I had luck printing the halved version (print two copies as the halves are identical) at 0.1 mm layer…
I wanted something beautiful to somehow hide the stepper motor there. I combined and put the cable as high as I wanted from the beginning to have a smoother curve, without disturbing anywhere else and more good position for cable chain .…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
slip on - hex cover for Ender 3 v3 SE stepper motor
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
I love this design by mbrady because it sends air where you want it, rather than randomly blowing it away like the top down models do. I oriented my Octopus so this blower shoots the air straight out the back of the base. I used a nice…
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
This is a 28BYJ-48 stepper motor mount. It's the stepper motor that comes with the Elegoo Arduino starter kit. Will allow you to attach the motor into this 3D printed part and then you can attach it to a flat surface. Print Settings…
Disclaimer : this model is a work in progress and it may contain some dimensional inaccuracies. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM…
Stepper Motor Dust Cover - X/P Series Protect your XY stepper motors from dust with ease using this straightforward print. Unlike other solutions that involve clips that can potentially damage belts, this design offers a clean and…
Minimalistic Motorized Roller Blinds via esphome and homeassistant. To automate your roller blinds for: open blinds slowly and noiseless when waking up, coupled to your alarm clock close blinds on hot summer days control blinds if you are…
Works with motors up to 40mm in height and have the nema 17 standart. Wall line count should be high since they will endure the pressure of the screws I used 7 but 5 should be enough. Print with legs straight up not on it's side(like the…
对于同一电机，2mm轴的成本为59元，而5mm轴仅成本为8元，简直不可理喻。我在互联网上找不到修改后的版本，看来我只能自己做一个了。 For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I…
Inspired by "Dachshund eppendorf tube holder" by jrletourneau ( https://www.thingiverse.com/thing:3116138 ) I designed this tube holder which holds 6x 1.5 mL Eppis. Made in Fusion 360. Because cat people do lab work too. Enjoy. EDIT…
Stepper pulley remover for the K1 nd K1M stepper motors. This was designed in an effort to remove and replace the 36t pulleys on the stock steppers, this resulted in a shift that lowered the threshold of VFA from ~250mm/s to ~175mm/s. We…
Use-case and motivation for this part Yes, I admit that this may be the most senseless 3D printable part from an economical point view. But I love to reverse engineer unknown threads. So I could not resist to come up with this design for…
Y-Axis Stepper Motor Mount for the Creality Ender-3 S1 and S1 Pro This makes use of the spare "z-axis end stop" included with the printer. The regular y-axis end stop has no mounting holes in the pcb and is a flawed design for silent…
I made this by request to match My other covers use 2pcs M4x10 + T-nuts print upside down with NO supports If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer:…
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
Roblox Grow a Garden-inspired fruit & veggie set: tomato, cocoa, bell pepper, apple, mango
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: Pepperbox used by Percy De Rolo from the Critical Role Legend of Vox…
See https://www.amazon.com/gp/product/B087B5NWY4/ref=ppx_yo_dt_b_search_asin_image
Here we have a water tower that borrows design ideas from Kim Brumble's on thingiverse but with some significantly different features and dimensions. Thank you to Kim for sharing his modeling work. The tank is designed for printing with…
This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…
This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…
Cover for Ender 3 V3 SE Stepper Motor Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : Ver 1.0 : No Ver 2.0 : Yes Layer Height : 0.2mm Infill : 10% Filament : PLA
Thanks to djos_1475 for sharing his design. Modified the design to use M4 screws/t-nuts to secure the mount to the 2040. While at it, added: some clearance around the axial thrust bearing to allow for slightly larger flexible coupler; a…
Feel free to support my work and leave a tip.
It seems like it would be super irritating to remove bits of debris from the MK4's Z-Stepper mounts. While it seems much less likely to drop a “nozzle drool” line than the MK3 was, it still seems like a good idea to keep them covered.…
Dr Pepper and Diet Dr Pepper Folding Door Display Box The Dr Pepper Folding Door Display Box is a compact display case inspired by the classic soda brand. It features a segmented folding-door mechanism that opens smoothly to reveal the…
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
Additional parts: 3 mm washers (14x) M3 x 30 mm bolts (4x) M3 x 16 mm bolts (4x) M3 x 10 mm bolts (6x) M3 x 20 mm bolts (3x) M3 nuts (13x) 6808 bearings (1x) 623 bearings (6x)
A simple mount for a 28BYJ-48 stepper motor and driver board to keep things tidy. NOTE: Just got a batch of 28BYJ-48s. Motor mount fits well, but the driver boards were a tiny bit large for my control case, so you may have to scale yours…
STEPPER MOTOR BRACKET Inventables. This is intended for prototyping. Print instructions Category: Hobby Summary STEPPER MOTOR BRACKET Inventables. This is intended for prototyping.
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
Cover for X-Axis stepper motor only OR with cable holder. I wanted something beautiful to somehow hide the stepper motor there. I combined and put the cable as high as I wanted from the beginning to have a smoother curve, without…
Fill one side up with pepper and the other one with salt. By twisting the plugs, you can open and close the slit on the shakers side, to dispense some flavour on to your meal It is best be printed in its given orientation but due to its…
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
EDIT: Díky četným žádostem jsem vytvořil i variantu se zámky, která na stepperu drží pevněji. Víčko chrání otvor Z stepperu tiskárny Prusa MINI před vnikáním prachu a nečistot. Původní verze sedí na místě volně, aby se dala snadno…
If you are looking for a fun way to Spook up Dinner time Here are the files for my Halloween Salt and Pepper Shakers The Stones print great with zero supports and I would suggest printing the Bung/Plugs in a flexible filament, though I…
Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…
A nice printable logo of Dr. Pepper. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: Hatchbox PLA
Update nov 2025: The spacers were a bit too short, which may have caused the lamellas to be slightly too squashed. I apologize for that. The new spacers should work better. Ideally, secure them with self-locking nuts and perhaps don't…
Here is a good use for a stepper motor that would otherwise sit around and collect dust. This is a work in progress and the results so far look promising. I wanted a design that was simple and that didn't require any hardware. No screws…
This is a tube rack to snugly secure 15mL and 50mL falcon tubes; 5mL, 1.5mL, and 0.5mL eppendorf tubes. The combination tube racks you can order were just too expensive for what they were and some did not secure the tube enough for my…
Treppe für z.b. Playmobil Puppenhaus 70985 Staircase fits for e.g. Playmobil Take Along Dollhouse 70985 Multicolor mit single Noozle - Farben wechsel auf 2,5mm einfügen -→ dann hat der Handlauf eine andere Farbe als die Stiege. → 3mf -…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
A remix of D_Jespersen's fantastic stepper covers. My Ender 5 Plus had a motor that was about 6mm bigger than the one the original model was designed for. I'm not sure if this is a feature unique to the Ender 5 Plus, or if any Ender 5…
Stepper Motor Cover (with hidden cables) for Ender 3 V3 SE/KE
A manual bottle cutter made from a few 3D printer pieces. Cuts a 6.5+/- strip of plastic to feed into a PET filament recycler, like The Recreator 3d or PETbot. I like the community cutter with bearing, but I have no way of grind them…
This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal with this CAD model series is to release at some point an assembly model of the whole K1 to help creators design amazing things for this…
Modeled in Siemens NX. Printed the Planet and Sun Gears out of Nylon with 0.25 Nozzle at 0.07mm layer height and 100% infill, the Carrier out of Nylon with 0.4 Nozzle and 0.1mm layer height and 100% infill, the rest out of PLA with 0.4…
Only top is rounded, to make printing easier Printing notes: Prints in-place, no supports This models assumes a fairly well calibrated printer, but you probably don't have one: Try to print as-is at the start If axles don't fit properly…
This will fit stepper motors type 42-34 as found in many kits. Print Settings Printer: Elegoo Neptune 2S Rafts: No Supports: No Resolution: 0.15 Infill: 30 Filament: Your choice, I used PLA Notes: Print with the top plate face down…
Statuette for fans of the band Led Zeppelin
Make sure you educate yourself about the potencial health risks! Microplastic is not good in the food for sure. Some people say it's okay to use it, some people say not. You decide how you use this model. Be responsible! Salt and pepper…
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Now I designed thinner struts, 1 mm thick. I wanted to make it 1.5 but many of the details wouldn't work or they would look bad. The…
it is a very good designed but will need suports
Color order: White then Red. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…
Consists of two pieces to fit print volume (Left / Right) Features: 21x holes for screwdrivers 1x hole for scissors 6x hooks on the side (eg for tape measure, utility knife) Has a stepped design to facilitate easy viewing and grabbing.…
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…
Mounting plate with 10 Lego technic compatible peg holes that clips round a standard, cheap 28BYJ-48 unipolar stepper motor. The stepper motor drive axle is perfectly aligned so as to mesh with other technic gears. Printed on an TronXY…
Stepper Motor Nema 23 length 41-115mm shaft D8
Geschwungene Treppe für Hamster in einem Nagerium Aussparung für Glas: 5mm Category: Pets
Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…
Holes in cup 2mm(H) 2,5mm(I) and 3mm(J). Jars diameter cca 40mm, volume cca 80-90ml. Walls thickness 2mm. For salt recomended J2 cup, for pepper H2. Filament need for shaker (jar with cup) cca 12m. Tested PLA 0,2mm, random seam. Spice…
Two 32 teeth pulleys for 12mm HTD 3M (3mm) timing belt. The pulleys has the hard to find HTD profile and has god grip with the timing belt. One pulley is for the stepper motor 8mm shaft and the other pulley is for the 10mm key indexed…
Quick settings for those who are in a rush: PET-G, 3 perimeters, 20% cubic infill, 1 mm top and bottom, I made them with 0.2 mm layer heights but you can also make them with 0.3 mm layer height Also for the Y stepper mount you'll need to…
The riser block bolts down to the table. For best clamping force place the back of the clamp on the stair just higher than the top of your part as shown in the picture
Comes in handy when freezing multiple samples in liquid nitrogen. For an alternative design, please check this model: https://www.printables.com/model/1326290-eppendorf-cuvette-vial-holder-10x-25x
Lightweight print stand which can be printed with no infill and with no supports. Very handy when it is needed to weigh small amounts of salts or compounds directly in to tube using analytical scales. All models in pictures have been…
This is a rendition of the Y-axis stepper motor housing on the E3S1Pro that is remixed from a model on Cults3d.com by Blu-Square for the Ender 3 S1. The original model did not allow for the usage of the OEM endstop, so I modified it to…
Print settings: Printer: Creality Ender 5; Rafts: No; Supports: No; Resolution: 0.2 mm; Infill: 20%; Filament: ABS.This is my slowly and gradualy desgined cable chain for my beloved Ender 5 with Micro Swiss Direct Drive. It is a remix of…
Part of my ongoing series of models to enclose my Mercury One.1 These stepper mounts do three things: They are contained entirely within the frame of the printer so that the printer can be easily enclosed using large, flat panels. They…
This is a slim and significant lighter stepper cooler for a 40mm Noctua fan. It is lighter because it works without screws. In my tests the stepper is not geting warmer than 45°C. The shaft with the drivegear stay at nearly the same…
⚠ THIS MODEL IS NOT FOR 3D PRINTING — it is a CAD reference body for use in Fusion 360 assemblies only. A parametric NEMA 17 stepper motor model designed for use in Fusion 360 assemblies. The geometry is intentionally simplified (no…
This is a 3D model of E3D Titan Extruder CLONE with a stepper motor and it's mount. All of the parts that are in this assembly are in my other projects so if you are interested take a look. The project was drawn in Autodesk Inventor 2021.
I ran out of cardboard cryobox dividers, so I’ve made my own. Printing in vase mode saves time considerably. I printed it from PLA and although it is not super resistant to low temperatures, it works and haven’t cracked yet. I printed…
Lightweight holder for 1.5, 0.5 and 0.3 ml tubes with small area for names.
Made a fairly faithful recreation of Harry Du Bois' service pistol from the Disco Elysium game. Some creative liberties were taken, but the result is mostly game-accurate. Assembly requires: 1x M2x20mm countersunk bolt 1x M2x25mm…
After I upgraded my Ender 3 Pro extruder to a Micro Swiss Direct Drive, cable management became an issue. Thus, I decided to embed all cables from the extruder into a cable chain and lead them to the rear-box, where the controller board…
Once-common Bison species found throughout Eurasia and North America, best known by the well-preserved Blue Babe mummy.
A simple slide on cover for your 28BYJ-48 Stepper Motors. No other hardware necessary for mounting. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: Doesn't Matter Supports: No Resolution: 0.2-0.3mm Infill: 10%…
The holes are printed tapped for an M4 thread. You will need to print one tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab Category:…
H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…
Fysetc Spider Stepper Driver Cooling. Tests with versions 2.1, 2.2, 2.3 and 3.0.
adjustable Stepper Mount Nema 17 This adjustable Stepper Mount was designed for a DIY laser cutter project. The Stepper Mount is fixed with two M4 with 20mm screws and T-Nuts. The case itself is attached to the item profile with two M4…
I used Prusa-slicer to alter the original design by NotLikeALeafOnTheWind. I needed something that I could actually hold onto to stall the motor easily. Quick Print under 10 minutes.
Update V4.2 Fits on my MK3s+ upgrade without any issues. hint!!! After replacing the heatbreak with an original e3D, we were able to print the material that never ran before. most PLA filaments works very well (many times printed over 20h…
A NEMA17 stepper motor mock-up with a rotating shaft and face mounting capabilities. Print Settings Printer: Prusa i3 MK2 Dolly Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Post-Printing Remove supports and clean up. Assemble…
