Counting matching models…
An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
This pomegranate box can be a great gift for someone you love. It looks great when printed in color changing filaments. After testing i think that with aligned seams you get much better surface quality. Printed with 0.2 layer height.
Print approx. €7.82–€9.55 excl. taxPreliminary estimate for one variant
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
Empty watercolor palette of 36 units created for half pan. Compatible with Van Gogh, Winsor&Newton brands. Standard half-pan. The lid part is suitable for use as a mixing palette. It is modeled for PLA material but is also suitable for…
Print approx. €9.29–€11.36 excl. taxPreliminary estimate for one variant
Did a super quick remix of the original work made by Q-tec to add the power cord from the back of the device instead.
Print approx. €9.36–€11.44 excl. taxPreliminary estimate for PETGSource material: PET
Ich habe das Modell mit PETG gedruckt, da es draußen verwendet werden soll. das ist besonders bei dem Filter nützlich, da man sich das Fäden ziehen zu nutze machen kann um eine feinere Filterung zu erreichen. Das Modell ist aus 3 teilen…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
🤖 Cybercore Gauntlet – Futuristic Power at Your Fingertips ⚡ Step into the future with the Cybercore Gauntlet , a sleek, sci-fi inspired mechanical hand that looks like it came straight out of a high-tech exosuit or cybernetic lab. With…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
if you need a smaller pan than half pan, print this :)
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Einkaufswagen Chip am Mittelfinger mit Loch für den Schlüsselbund. Shopping cart chip on the middle finger with hole for the key ring.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
This tray expands the storage capacity of a Sennelier watercolor tin palette from 48 to 60 half-pans, 30 full-pans, or a combination of both. Dimensions: 104mm X 205 mm X 15mm fits most watercolor 48 half-pans tin palettes (check…
Print approx. €7.14–€8.73 excl. taxPreliminary estimate for one variant
I designed this for the Tessellating Tiles contest as this is tile-able but it's so much more than that. You can connect these tiles into endless possible shapes. A great building block toy for kids and adults alike. For now i've only had…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
This 3D printed earring design showcases a cluster of overlapping circles in an intricate, lightweight pattern. They are designed to face outward to display the print pattern for an added decorative element. These were printed with PLA at…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Base Stand / Feet for the Watercool MORA4 (MO-RA) Radiators. Works on the 200, 400, 600 versions of the radiator. Only tested on the 400. Dimensions 150 x 50 x 25mm. There is enough espace for mounting both grills (front and back) and…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
Bookmark of a Bordercollie dog, 3D and is very realistic. I printed it in 29 min on a Prusa mk3s+, 0,15 layer height and 15% infill.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Full size pans for watercolours. They have the same size as White Night pans.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for PETGSource material: PET
Tegui doorbell/intercoms are very common in Spain. Over the years the dimensions have changed and old, still functional devices may not fit any currently available mounting boxes. I found myself in this situation recently with a Tegui…
Print approx. €6.02–€7.36 excl. taxPreliminary estimate for one variant
Aiphone IX-EA IP Video Door Station Intercom Junction Box Junction Box for the Aiphone IX-EA IP Video Door Station Intercom. I tried in ABS and PETG, having way better results with PETG. ABS tends to warp easily. Two holes for the Aiphone…
Print approx. €6.05–€7.40 excl. taxPreliminary estimate for PETGSource material: PET
This model is free. If you appreciate this model, please leave a download and a like! A coin is printed in only 32 minutes! A coin for the yearly Scouting JOTA-JOTI. Update for 2024. You can print this in two parts with a color change at…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
The model contains a 5mm spacer for 2 80mm Fans and the attachment for the 240mm radiotor. I used this model to cover up the fans https://www.printables.com/de/model/373460-hexagon-fan-cover-80mm-120mm-140mm/comments/1557508
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
I bought an used machine that didn't have the original with it so I had to improvise one. Needs 1,7mm thick 8mm diameter circular magnets in the back if you want to attach it securely. And steel strip on the cooler's shell to attach it…
Print approx. €11.83–€14.46 excl. taxPreliminary estimate for one variant
This eyecup was designed as a replacement for the missing original on my Polaroid Supercolor 670AF. I printed my version in PETG. TPU might be a better option due to its flexibility, although I haven't tested it myself. Diese Augenmuschel…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Intercooler for Crocs. Add 6mm fuel pipes to connectors. Print 2 turbos, and superglue them together. : https://www.printables.com/model/317275-crocs-turbo
A hexagon with a Skadis hole pattern that works well with Skadis accessories that can fit inside a single tile. The tiles can be connected together with the included connector to form a pattern of multiple tiles. Connecting the tiles…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
Stop your bottles from rolling around in your fridge or shelf and be able to stack bottles on top :-) 4 versions available with a diferent radius: 1,5 litre soda bottle normal wine bottle soda can regular beer bottle All versions…
Generic half pan dimensions: 19 x 16 x 9.5mm Winsor and Newton variant dimensions: 19 x 15.75 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other…
ATTENTION: this is only the base plate, which can be configured to change colors at the first layer or at different heights. By default, the flag, border, tag are at the same height as the base, for swapping colors at first layer (the…
Here is an improved version of my Truchet Pattern Chainmail Fabric. It uses a chainmail-style structure that connects all the pieces together, allowing it to move and behave like fabric while still having the look and character of armour.…
This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 7%
A portable watercolor and mixing palette kit that can be secured to your sketchbook using foldback clips (up to 40 mm). It allows for different mounting layouts, snaping in place and closing using magnets (Ø 5mm x 2mm). Perfect for urban…
Here's the wall intercom kit I put on thingiverse years ago and had someone interested in having it updated so here it is. Update October 7 2025 - Added a simple stand for propping it up on a shelf.
This is a mount for Black and Decker powerconnect 18V batteries for storate on walls or shelves. two versions. one with holes in the wall because I like the look.
Pulverbeschichtungs Pistole mit Venturi und Tribo-Effekt. Der Tribo-Prozess arbeitet mit Reibung, genau wie das Reiben Ihrer Haare mit einem Ballon. Die Tribo-Pistole verfügt über ein Reibungssystem, durch das Pulver geleitet und von der…
This is an index card organizer/sorter I made for myself and figured someone else might find some use out of it. I use index cards religiously now to organize information and needed an… index of sorts to keep them organized ;) (I am…
I love going on road trips in my Ioniq 5. However, I always face the challenge of not having a good place to store trash during my travels. So, sketched this, fits perfect in the centerconsole. I printed with 0.6mm nozzle and 0.48mm layer…
Description The Rack Robotics's Powercore is a transistor-capacitor hybrid EDM power supply unit. The Powercore creates, maintains, and monitors electrical sparks in an EDM machine. It is designed to be affordable and hackable. Electrical…
This is a folding, print in place watercolor palette. I developed this because I wanted a tray with fewer paint wells and more mixing spots than any of the trays on Amazon Let me know in the comments how it works for you and if there's…
use a DIN9021 washer to spread the load. (15mm maximum) make sure the bottom 2mm is solid, so the mount can be tensioned without destroying any infill. for best fit , set your slicing tolerance to exclusive (at least in Cura)
MODEL DETAILS Connector clips for the joint of your wiring where the HeaterCore and extension cables meet. This is not a mandatory part of the installation. You will need 4x cable ties. RECOMMENDED PRINT SETTINGS No support material is…
Used PrusaSlicer 2.6.0-alpha5 (Organic supports) https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.6.0-alpha5 Print part and Use together with Organic supports, do not detach support from part. Printable on MK3s and MINI…
Simple case with lid for 20 half pan water colors and a couple of pencils. Created in OnShape - document is here: https://cad.onshape.com/documents/096698f5602ff8094f2ace0b/w/67410470c2b1b469f3691b6e/e/ac44ae02b019629a8dcda0b6 19-09-2019…
This is a working model of the Big Thunder Mountain railroad rollercoaster from Disneyland California. It is made so that you can use 5x11x4 mm ball bearings for the wheels. You will need 10 3mmx 15mm screws, 9 washers to fit 3mm and a…
A template to create cards that you can use to create watercolour swatches. Based on a design my wife described to me. Just trace in the open areas and then apply your watercolour to create a swatch card.
I made cover for my netatmo outdoor module, this can be printed without supports. Just insert outdoormodule between two halfs, screw in stand and then top.
Standard-sized HALF PANS and WHOLE PANS for your Watercolour Palettes! The walls are thin, so there's less material usage AND you have more room for PAINT! In the photos, you can compare with the pans from Schmincke & White Nights. A…
TPU case to protect the Anker 737 power bank. Print standing upright, supports are included where needed. Printed with 2 walls and 30% infill using a 0.4mm nozzle and NinjaTek NinjaFlex TPU with 85A hardness. As @KimBauters mentions, less…
**v2 Update I have added a rounded corner on the front grabbing edge (as per requested) and removed the magnet holes. The model now includes a .step file for better slicing in Bambu Slicer. Simple holder for blank index cards / notecards.…
Generic full pan dimensions: 30 x 19 x 9.5mm Winsor and Newton variant dimensions: 30 x 19 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other watercolor…
Case for Stream deck xl using raspberry pi 4/5 with a single Neutrik ethercon for a connection. The model has been changed to accommodate a single ethercon connection. As my use case in primarily in live situations where i want a solid…
This is a meticulously designed watercolor paint tray tailored for enthusiasts and professionals alike. Crafted for a precise fit, the tray is optimized for the insertion of van Gogh watercolor paints. Key Features: Print-In-Place Hinge:…
Remixed a smaller version of this excellent watercolor box. Holds 16 standard half pans. Requires 3 large and 3 normal paint trays (STLs included) and 16 standard half pans. Prints OK without supports but settings have to be locked in for…
You can't get inline Powercon sockets so the only option to extend one is a bulky and expensive coupler. This 3D printed shroud lets you convert a standard panel mount socket into an inline one. Inspired by Joyva on Thingiverse , (I made…
These are very simple slide-in bars for attaching molle system pouches together. The simplest one just slides in and out and can be removed in a hurry. The other two have small hooks on their lower ends which are relatively simple to…
Here I give you my Para 2 Backspacer parts so you can print yourself some too. You can separate the different parts in your slicer. So you don' t need to print them all at the same time :) Have fun and keep printin! It took quite a while…
Transform your old mint tin into a new paint palette with this six color watercolor paint palette insert! It can accommodate six colors and a spot for a sponge. Print at your preferred layer height, no supports required. Plus, the…
This is a simple, compact and sturdy box for making breakouts for Ethercon. Specifically made for Neutrik NE8FDV YK . I've printed the main body on it's face (connector side) and the lid on it's back so that the two pieces complement each…
Spyderco Manix 2 LW Honeycomb Scales.
Remix of austinvojta's wonderful infinity cube. Since I primarily use powdercoated print sheets, good adhesion is often dependant on how much surface area the first layer has, I have had significant trouble cleanly printing this model…
A pan for small watercolor brushes. Suitable for brushes from number 1 to number 10, maybe more. Size 135*60*6 mm.
Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…
This is my version of a Power Cord Holder for my Traeger 575 Grill . (I think i could be used on other models) You can wrap the cord around it and then plug in the end to keep it neat and tidy. I also added a space on the backside to add…
A simple watercolor palette with 60 wells in a ~5"x7" space. This also fits within these tins very well, if you prefer a snap-to-close lid: https://www.amazon.com/Pack-Container-Large-7-25-Crafftin/dp/B076TJ75KT Print instructions This…
This is a multicolor remix of the Digit Gear from Beer Counter v5
This is possibly the smallest PC Testbench with dual 360mm Radiator Support. It has mounting for ATX motherboards and therefore also ITX. mATX can be mounted as well but is not supported on the bottom two screw holes. eATX should also…
I recommend printing it with 100% infill and 4 walls for security. No supports needed.
Very thankful for felixwin providing the original files. I only wanted to print scales to go over the metal liner, not replace the liner and scales. I thinned them out and also added holes for the pocket clip and made the Lanyard hole a…
This Altoid paint tray has six 2cm x 2cm x 1.4cm deep inserts for dry/solid paint blocks. Six paint brush holders 4.6mm round and a 1.1cm x 3.6cm x 1.2cm rinse/mix insert. July 23rd 2020 Update Added V2 version that is slightly narrower…
Adapter into which a Neutrik NE8FDX-Y6 or NE8FDX-Y6-B panel connector can be mounted and connected to a regular Ethernet Cat6A cable. I used a 50cm Cat6A patch cable and cut it in half to get two pigtails. You will need two M3 brass…
About This Model These replacement scales allow you to customize your Spyderco Endura 4 with any material/color handle choice you'd like. They also forego the subtle finger grooves on the handle, allowing for a more neutral grip that…
I uploaded Fusion 360 file (.f3d) for customization The keychain needs 1 print with pause for color changing Just set pause at 1mm or the layer height corresponding Need too much retractions after the pause, then tune properly for this…
Protective cap for anderson sb175 (stile) connectors; thight tolerances,so it may take a few prints to get right. The flat version does not lock positively unlike the normal version, but is therefore easier to remove from the plug and has…
Based on the concept of an existing commercial product Original design adjusted to be printed without supports Best printed in TPU (adjust infill and perimeters/walls to achieve the desired stiffness) PETG with low infill might work as…
This is a modified version of my other Spyderco Mule Team scales, with a hidden Lanyard hole and smooth, solid hex and outline hex surface texturing. These scales were designed around an S45VN blade, I'm not sure what the external…
Amidst the gentle embrace of a relentless downpour, the essence of " Overcome " finds its true form in the love and unity of a couple. This narrative unfolds under the grey, whispering skies, where raindrops weave a symphony of resilience…
This is a simple 3D-Printed powerCON TRUE1 to Schuko adapter. It features a Neutrik Powercon inlet and 3 PCE Schuko outlets The design idea was to have a simple, robust and cheap power distributor. It uses long screws instead of inserts…
This is a case for rectangular electronic keys for an intercom. It consists of two halves, one of which is glued into the other. key_thick.stl - a narrow box for the key entirely together with the coating. key_thing.stl - wide uncoated…
Edit 18 Aug 2023: A kind user ( @BeckyMarriott_597138 ) asked me about the different tube sizes shown in my original cover photo, and I realized that my workflow changed in the middle of this design! When I first designed this piece (the…
Fast Coupler Cases that are useful for sound system providers. Use M3 Screw to mount the Speakon or Powercon socket to the coupler case.
WARNING: Construction and use of this model are entirely at your OWN RISK . The finished product is not certified and improper wiring can result in serious injury or death . A simple box for 1 IN and 3 OUT PowerCON / speakON connectors…
The Plain and Thin designs are great in TPU and PETG. I would recommend PETG only for the Spring version. Use at your own risk. I can only recommend this for demonstration and simulator training environments. Thanks for looking!
Please see this forum post for further information/instruction: I Created a 3D Printed Sheath That Should Work With (almost) All Scales (WORK IN PROGRESS) - Spyderco Forums
Here I give you my Para 3 Backspacer parts so you can print yourself some too. You can separate the different parts in your slicer. So you don' t need to print them all at the same time :) Have fun and keep printin! It took quite a while…
I created this system because we have a lot of watercolor half pans that we rotate out of our field sets. We don't really like the metal storage systems and also like having some space around our half pans when using them, this storage…
Introducing the ultra-compact watercolor palette, the perfect artistic companion for your on-the-go adventures. This tiny treasure fits snugly in your pocket or bag, ensuring you can indulge your creative impulses anytime, anywhere. Dive…
SLOPED Standard-sized WHOLE PANS for your Watercolour Palettes! Two versions! One with a flat area at the bottom only, and the second with a flat area at both the top and the bottom of the slope. The horizontal layer lines which are a…
Set of different hose clamps for closed circuit water cooling Universal for hoses of 10/11 mm, see schematics in pictures. 6 different Heights: 12 mm, 15mm, 20mm, 25mm, 30 mm, 35mm 5 different Lengtes (Center-to-center): 25mm, 30mm, 35mm,…
if you have the tri-angle sharpening stone without the base, you can use my solution. Both angle of 30° and 40° a possible. with the cover you have a space saving storage possibility. I recommend PETG but PLA works fin too. NO SUPORTS…
easy to print adapter for standard gardena. Best with ASA. Infill 30%. 0.2 Layer height
I could not find roller coaster tracks for printing that worked for me - so I designed them myself. I slightly changed dimensions, so that it delivers functional prints with PLA (I used esun pla+). E.g. Pins dimensions is increased…
These interconnecting links can be joined to form a fun toy chain that can be manipulated in may ways. Built-in detents allow for 5 discrete part positions per link. Print multiple links and simply press together to link. Print Settings…
Anker 737 PowerCore 24K bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/8yI4wjq 24000mAh Happy printing!
This version requires some force to pop it in the tin, but won't come out. It's helpful to put a few dots of hot glue inside before pressing the palette in the tin so that it doesn't move around at all.
This Travel Watercolor Palette is a compact, foldable companion designed for watercolor artists who prioritize portability. With a thoughtful layout and optimized for 3D printing, it’s perfect for outdoor sketching, travel journaling, or…
