80 models
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Most of modern beekeeping happens in modular hives. This is a model of one such hive, specifically the “Segeberger Beute” often found in Northern Germany. The model is in scale 1:12.5. I personally don't have such a hive (use wood hives…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for the Brother Serger overlock thread guide bar. Added additional height to the model over the original Brother part for increased strength. This was printed from PLA with 15% infill; 6 outer layers were used…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Om kleine plasticzakken op te bergen in of op de kast. Om te kleven, vijzen of ophangen. Voor het ophang systeem heb ik de tussen latjes gekleefd. Voor die latjes heb ik er een Fusion 360 bestanden bij gedaan. To store small plastic bags…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Adapt ¼" pneumatic / water line tubing to the Thunderdome Merger . M6 threads https://www.printables.com/model/629124-the-thunderdome-mk2-dual-bowden-merger-feed-throug
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Serger- Brother Overlock thread tree fix. Use existing broken tree and stem screw. Fasten bracket to metal stem. Then use screws or hot glue gun to bracket. Holes must be pre drilled in plastic thread holder. Holes are 2.5mm.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
A 16 inch lane merger to allow 3 straight track pieces to merge into the crash racers fat track. The merger is pre-split to 2 pieces in fusion 360 to fit 200mm length print beds. All parts can connect with standard hot wheels track…
I reorganized my sewing space and wanted something to organize the thread cones I use wth my overlock and coverlock machines, so I designed these trays for the Ikea Skadis peg board. The hooks are based on GP's Skadis Hook .
The gas bottle holder diameter is 74mm, because this is for my work van I needed it to be strong due to the movement of the vehicle so the infill was set to 40% (print time 31hrs) But this can easily be reduced if it were to be fitted to…
6-1 Filament Hub / Merger / Splitter ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward Feel…
Need a replacement for your Brother 1034D Serger's lost or broken thread catcher? Look no further. This design incorporates a sturdier retention tab than the original to keep the basket snug against the body of your serger, and even…
Cookie cutter with the silhouette of a Leonberger dog (https://en.wikipedia.org/wiki/Leonberger). Made it for my sister in law.
Ich habe hier eine Magnetische Schutzkappe für mein Specialized Ladekabel (Rosenberger Stecker) konstruiert. Die Schutzkappe kann auch an dem Fahrrad montiert werden um die Kontakte vor Dreck oder Regen zu schützen. eingesetzt habe ich 2…
The odd shape of the Steinberger (and clones) “headless” guitars makes normal folding electric guitar stands useless without modifications. I wanted a small floor stand for my Steinberger clone and whipped up this model to do the job.…
Our overlocker needed a new light bulb. Changing the bulb turned out to be difficult, needing a tool that the maker sells (see the last photo). With no dealer nearby, and the weekend already here so mail order would take too long, I…
The Radeberger Haken is a special rescue hook founded in Germany. https://de.wikipedia.org/wiki/Radeberger_Haken
We had the problem to merge the air exhaust ducts of two mobile air conditions into one outlet window of around 210x180 mm. There were standard pipe reduction adapters that could be combined with this construction (white parts in the…
This is a replacement thread guide that fits the Brother Lock 1034D Serger. It may fit other models. The post that fits into the vertical tube is 7.5mm diameter. The bars press fit into the hub. You could glue them, but it's not really…
🇫🇷 🇧🇪 Français 🇨🇦🇸🇳… Ceci est un bac permettant de récupérer les chutes d'une surjeteuse. Il se place devant la machine pendant la couture. Il est important que votre bac épouse parfaitement la forme de la machine afin que les chutes ne…
In order to clean my precision rifle I need to remove the cheek rest, but then it's slightly annoying to get the height perfect again. I banged this up real quick. Made specifically for the Bergara B-14 HMR, but might fit others if their…
A holder for the Rothenberger mini gas torch, but it should fit any other mini gas torch. The inner diameter is 30mm, the distance betwen the screws is 40mm (perfect for Ikea Skadis) and it fits for M2 screws. I will ad a version for…
Der Schutzdeckel mit eingeklebten Magneten kann auf den Motorstecker meines Specialized Turbo Levo MTB gesetzt werden, wenn das Fahrrad auf einem Gepäckträger transportiert wird. Dadurch sind die empfindlichen Kontakte geschützt, wenn es…
To use a serger you usually need 3 to 4 spools of thread. If you don't want to buy so many cones at once you can wind the thread from one cone onto several smaller spools. This thing is an aid to use the winding tool for the bobbins on…
Fluglochkeil für den (Flach-) Boden der Segeberger Beute Der Fluglochkeil ermöglicht es in Verbindung mit einem Fluglochschieber das Flugloch der Segeberger Beute zu verengen oder bienendicht zu verschließen. Dies ist insbesondere wichtig…
https://www.fritz-berger.de/artikel/berger-kofferbox-tampere-130789?varid=121228&partnerid=46A&xtor=SEC-97[520_Smart_Shopping_CSS_PPF_A]-GOO-[A]-[b]-S-[733190]&gclid=CjwKCAjw_b6WBhAQEiwAp4HyIMD2m4M9EuWUbXwa35U_JE7VEQwUUQGbAOtjTYdqKctCw5FlZ…
I made this for the textile workshop at Stockholm Makerspace , to get a better organization of the large (5000m) cones of threads for the overlock/serger sewing machines.
DE: Dieser Gürtelclip wurde für die Binderberger Funkfernsteuerung T60TX-Series gezeichnet. Empfohlen wird dieses Teil aus widerstandsfähigem Material zu drucken, das es bei den Holzarbeiten hin und wieder rau her geht. Ich habe das Teil…
I printed this with default settings on a Prusa i3. I had to rotate to fit the surface. Gently poke hole into shaft to c
I designed larger feet because the feet of the original step always press into the floor if the ground is too soft. I hope someone can use it... I printed it with the settings in the 3mf. Works great. A little superglue when assembling…
Inspired by this model: https://www.thingiverse.com/thing:6088290 But didn't need the housing to fit a ESP module. Also had issues with light reflecting on the window and always giving a high reading. I've integrated good seperation of…
Inspired by Viktor Schauberger, this intuitive design attempts to create a parts-cooling vortex tornado, by directing air from two directions in an offset manner. Printed in crystal PLA, with supports. This PLA was transparent to…
The Rosenberger ebike charging plug has 2 strong magnets inside. If the charging plug is on the floor, small metal shavings could collect on the plug. These can then remain in the battery socket when charging. If after charging the motor…
Summary Holds up to 10s4p 18650 and charged through the magnetic Rosenberger LEV plug, therefore it works with 36v ebike chargers. Two parts to work with desktop printers, and has a lip to join the parts. Preferably glue them together for…
Clé pour remplacer la "fragile "clé de berger buton fourni par BEITER. Buse 0.4 mm Hauteur de couche 0.2 mm (Structural) 4 périmètres 5 couches inférieures et supérieures Remplissage 20% Gyroïde Imprimé en PC BLEND Prusa pour plus de…
Printed in eSun PLA+, solid, since it's a small print. PLA+ has a bit of “give” and it worked well, other (regular) PLA might be too rigid.
Centraal Beheergebouw van Herman Hertzberger 3d model at 1:000 scale
A bee queen excluder for the feeding compartment of the Segeberger mating hive.
Adapter and case for G4 RF1 Schlumberger gas meter to read optical impulses with an IR module from the 3rd decimal, and ESP8266 D1. The model has 3 holes (2.4mm diameter), which allow to fix the sensor, D1 board and the cover on the plate…
Cyrano de Bergerac – Buste Français Cette interprétation sculpturale de Cyrano de Bergerac rend hommage à l’un des personnages les plus emblématiques de la littérature française. Inspiré de l’œuvre d’Edmond Rostand, ce buste capture toute…
Honeycomb Halter für Wera Magnetisiergerät
What This Does This part can be mounted on the top of the Prusa Enclosure. Two PTFE tubes go in, one goes out. The idea is quite simple: If you have two dryers from which you want to print, you only have to retract one filament through…
Six years ago, the young Marius Hornberger uploaded a making-of video of his version of the Samurai Carpenter's router baseplate jig. Some months ago, I stumbled across it, bought a 300*300 mm plate of polycarbonate and let it sit in the…
I created this organizer to hold standard sewing-serger cones. The first version fits and works fine. The updated version (2) removes some material and slightly decreases printing time. It fits snugly in the drawer, so if you have to…
This is a replacement knob for a Lohberger oven. The original knob shattered and is quite expensive from the manufacturer. This Knob fits quite a few ovens from that manufacturer I guess - it's for a ZEH 55.3 in this case. I added the…
Wird das eBike auf dem Heckgepäckträger transportiert, schützt der Deckel den empfindlichen Motorstecker, insbesondere wenn man im Regen fährt. Zwar sind Magnete mit eingebaut, aber durch den Schlitz oben kann man zusätzlich einen…
The orginal latch seems not to be very tough, it broke. My repacement part snaps right in place. It is a little more snug then the original, a satisfing upgrade if I may say so myselfe. The design is slighly altered in order to print…
How do you fit 43mm discs in a 42mm box… Combining with something else sounds ok but can't really find anything that makes sense… (print is so bad printables doesn't want the photo :p reprinting since… got my magnets reversed anyway)
This is a remix from Robinder's tube merger https://www.thingiverse.com/thing:3676326 I built a 3 spool dry box with oversized feed tubes (OD=6mm, ID=4mm). This remix merges 3 tubes instead of 4 from the original design. Printed mine with…
Cup Submerger This is essentially a porous cap for a typical sized cup designed to forcibly submerge objects in that cup. My use case is cleaning retainers with denture cleaning tablets; normally the retainers float to the top so part of…
Der Radeberger Schriftzug für Sammler und stolze Trinker.
Rothenberger Case for Press Head (Remix) Keep your Rothenberger press heads safe and organized with this custom-designed case remix! 🎨 This updated version includes improvements for better functionality and durability, making it ideal for…
Screw Cap for Berger Luxus Klappsessel. Print upside down and with support. Category: Outdoor & Garden
These play well and save a lot of space but they are hard to play standing up due to how the strap is fitted. There were strap hooks at one time but they are as rare as hens teeth these days. I found this model and decided to see if I…
The Ropump works by pushing and pulling a big plunger to unclog drains, pipes, sinks and toilets. The standard adapters are not wide enough to seal against the sinks I usually come across. (Funny story: I tried to unclog a shower basin,…
Ich habe eine Schutzkappe für den Fahrradträger für die Wohnwagendeichsel von der Firma Berger. Ich habe ihn aus Asa gedruckt und musste ihn per Gummihammer einschlagen, also sehr eng.
Orignal is handle is made from abs mine is printed with petg. I used 0.6 nozzle with 0.20 layer hight no supports required.
Ordnung für's Zubehör 2 Teile zum zusammenkleben Unten Platz für Personalisierung
Bottle holder for stage plattforms from the company Schnakenberger if you're using these platforms at the FOH.
Table Extender and Merger with Storage for thin 18 mm tables
This Rothenberger Rospi sewer snake can be operated by drill or by hand. As I was always misplacing the crank handle I designed this little clip to keep the handle together with the tool. Just clip the tool and the handle together; no…
Rothenberger guide for 22mm ¾ copper pipe please print pretty solide at least 10 perimeters 5 top and bottom
I like to keep my tools and their accesories together. With this clip, and a small piece of 32mm PVC pipe, you can store the rubber adapters on the Ropump drain cleaner. Printing Printed in PETG with 0.6mm nozzle and 0.25mm layer height.…
Kasse mit Münzdurchwurf und Fahrscheinen, welche mit Kabelbindern an das Quadro Klettergerüst angebracht werden kann. Loch für Regenwasserablauf ist vorhanden. Wir hatten einen Bus gebaut und da fehlte noch das Busfahrerzubehör. Here we…
I bought two of those but didn't like their small footprint...
A unique 3D printable creation — this Serger Cone Thread Holder Stand, Overlock Sewing, Holds Large Spools Upright Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
If you want to do away with double ball strings this part is your ticket! Just need fitted inserts and set screws: 5x McMaster 91390A114 Alloy Steel Cup-Tip Set Screw M4 x 0.7 mm Thread Size, 10 mm Long 5x McMaster 94459A150 Heat-Set…
Grundplatte für die Stellböcke von Fritz Berger.
N'hésitez pas à laisser un commentaire ou un j'aime si vous aimez l'impression Instructions Vous pouvez redimensionner, mais veillez à ne pas modifier l’axe Z. Imprimer avec un remplissage de 100 % et une hauteur de couche de 0,08mm ,…
Perhaps a bit niche this one! Nevertheless, if you own a Rothenberger SuperFire blowtorch (a popular, quality torch) and use it with a remote gas cylinder, as I often do, then this could be very useful. When used with an integral gas…
As title, girlfriends machine broke the Lever (just old I guess). This is designed for use without the steel insert and will slot right onto the shaft. Bit of a squeeze to get past the covers, but easily do-able. Needs to be printed…
This is a spool holder for Singer Heavy Duty sergers. I designed this to fit a Singer 14HD854 to replace the official Singer Thread Holder Rack (aka Thread Unwinder), part #416675801. I know this also fits the Singer 14SH744, and it may…
Schneeberger Miniscale Interface Module Mounting Bracket. Mounting holes are for M3 screws
this thin "snowflake" will help your pickles to stay submerged in the salt solution for better fermentation process :) it fits in a wide variety of jars! I use it for olive fermentation; however, it can work great for cucumbers, tomatoes,…
A unique 3D printable creation — this Serger Cone Thread Holder Stand, Overlock Sewing, Holds Large Spools Upright Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
N'hésitez pas à laisser un commentaire ou un j'aime si vous aimez l'impression Instructions Vous pouvez redimensionner, mais veillez à ne pas modifier l’axe Z. Imprimer avec un remplissage de 100 % et une hauteur de couche de 0,08mm ,…
Demo: I wanted to design a portable bass that would be inexpensive and at the same time easy to print. I have a Creality K1 (22x22x25) so can’t print the core of the bass in just one part so had to print in 2. I used 2 40cm 8mm metal rods…
