Counting matching models…
Length - 213 mm Handle length - 140 mm Blade length - 50 mm Blade holder thickness - 5 mm Knife thickness - 17 mm Lock type - Back lock Print settings: Infill -100% Material - ABS plastic Layer height- 0.2 mm Print speed: 50 mm/s Screw…
Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options. https://www.thingiverse.com/thing:3313211 fischertechnik compatible…
Changelog/News: 2021-02-03: Added new variant "08 Gear rack drive (main body) v5_strongerprint" for easier removal of support structures 2019-02-24: Updated "11 Gripper arm" to v5, implementing these suggestions 2019-02-10: Peter (…
Foldable Karambit with locking mechanism. Print settings: Infill -100% Layer height- 0.2 mm For clean top layer turn on “ironing” M3, 14mm x 3 for spacer and blade lock M3, 12mm x 1 for blade holder Add 4 more washers on the cap head side…
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
(English version below) Erweiterbare Umkehrspindel basierend auf Vorarbeiten von Florian und Ideen von Florian, pinot und Stefan aus der ft:c . Zwei Endstücke mit beliebiger Anzahl von Mittelstücken. Die Endstücke alleine ergeben eine…
I was curious if I could print a fischertechnik compatible chain (module m1.5) using the print-in-place technique. I succeeded mostly, but not completely. Two versions are included: The "slim" chain is more similar to the original chains…
This is a remix of FingerTech's Twist Hub design, which they sell in aluminum. It has been modified to easily print without supports and be strong enough made out of PLA. This the for a 3mm D shaft and a 0.75" wide foam wheel. Uses the…
It's just a support for my airbrush compressor. It might fit to other compressor as its generic. Category: Art Tools
Changelog: 2020-02-19: I granted an exclusive permission to Peter Habermehl for selling prints of these stepper cases in his shop at www.mintronics.de . 2020-01-29: Improved top and bottom case parts according to my current design…
fischertechnik Gear Z20 for ZGB25RP and JGA25-370 DC motors with 4mm D-Axle Category: Robotics
The original fischertechnik Spannzange Z22 m0,5 (#35113) , so it can be printed in your own color. I've made a enlarged model Z28 to match the diameter of the end parts. Also added a model with a Z10 gear attached for direct drive, and a…
A more versatile alternative to the classic fischertechnik building block 15/Baustein 15 . This idea has been around for some while and others have realized it before . However there's no version on thingiverse yet, so here's my version.…
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based I2C module attached to their back. Buydisplay.com sell the EastRising ERC1602-4 LCD series with a chip-on-glass (COG)…
A print-in-place fish-eye / ball joint bearing rod end for fischertechnik 4 mm axles. Requires an original fischertechnik Spannzange Z22 m0,5 (#35113) for fastening. The maximum angle between the two axles is ca. 130° without fixing ca.…
This is a rack for Timbertech 30ml airbrush paint bottles, or any 35x35mm square paint bottle. The main rack holds 12 bottles and you can add more holders on top. There are 2 complements +8 and +4. The main rack can be printed without…
Enclosure for the ubiquitous 28BYJ-48 5V geared stepper motors for the fischertechnik construction toy system with a small footprint of 30x30x30 mm. Comes with several shaft adapters. The 28BYJ-48 is very cheap and surprisingly powerful…
Simple and easy, the screw-less flared magwell gives you a much easier time reloading, while being very low profile and still removable. Print in PLA+ or stronger (Just make sure the material has some flex if you ever want to remove it)…
A small off/on or pole-reversing switch for the fischertechnik construction toy system. Uses a 8x8 mm push-button switch found as a no name item on ebay , I assume it's a K8-8081D-L1 from Korean manufacturer HRO . The off/on version needs…
Update 11-04-2020: added Grundplatte_test_part.stl for testing and tuning of your print settings Update 03-04-2020: added two-sided versions ("Bauplatte") of both size plates. Update 19-03-2020: added half-sized 128x98 mm version, image…
Enclosure for TP223 mini touch sensor modules with a 5mm fischertechnik building block form factor. For assembly, simply solder a male or female 3 pin header in a horizontal position to the module and slide it into the enclosure's slot…
Seitenplatten, um mit fischertechnik Seilrolle und Kranhaken eine vorbildgetreue Kranflasche zu bauen.
A variant of the S-Riegelstein 15x15 for the fischertechnik construction toy system with an additional groove at its back (S-Riegelbaustein 15). Inspired by an idea from this thread in the fischertechnik community. Please consider leaving…
Two types of Z50 and Z60 cogwheels for use with fischertechnik. The cogs will mount with the regular nr 31014 or 31015 hubs to a 4mm axle. To make it easier to print without support, I also added the models with one flat, non-faceted…
The fischertechnik mini motor comes with a pinion and gear adapter . Unfortunately, the smaller Z11 gears of this adapter are prone to break sooner or later. Proper replacements can be ordered e.g. from the great fischerfriendsman.de…
Ein fischertechnik-Gehäuse für das abgebildete Sensor-Board mit Bosch BME280 Temperatur/Druck/Luftfeuchtigkeitssensor. Montage durch Snap-in-Deckel, der auch die Platine in Position hält. Keine Schrauben. 4-adriges Flachbandkabel, direkt…
Turn PET soda bottles or Sigg water bottles into air tanks for fischertechnik pneumatic applications. Both kinds of bottles are suited for compressed air up to at least 1 bar, the Sigg metal bottles are perfect for vacuums. The PET…
My earlier attempt did not fully realize the potential of a 45° angular block, as it did not stay within the fischertechnik 15mm grid. This design picks up several suggestions by Thomas (geometer) in this ftc-thread . There are STLs for…
Five additional grippers for the fischertechnik mini servo system https://www.thingiverse.com/thing:2807112 designed by juh Category: Construction Toys
Beams for the fischertechnik construction toy system. Just in case you'd need an aluminum beam from 30 to 210 mm length, and you don't have one at hand, just print it yourself. Example printed with "DasFilament silber" PLA Printing tips:…
fischertechnik Gear 10 for ZGB25RP and JGA25-370 motors Category: Robotics
Reworked to be much stronger. Did you lose the cap that holds your WeatherTech™ car mats? I sent the Dipper-Mobile out for detailed cleaning, and they lost one of the two caps that secure the mat to the floor on the driver's side. So I…
Ein Drehkranz für größere fischertechnik-Modelle. Die Anbauflächen haben 130mm Durchmesser, der DK ist 20mm dick, die Verzahnung hat 90 Zähne, der Gesamt-Durchmesser am Zahnkranz beträgt 138mm. Die Mittelbohrung ist für die Aufnahme eines…
Z22 cogwheel for fischertechnik. The teeth are already tapered to be used with the fischertechnik chains, but be sure to make them smooth (sandpaper), especially the side that was on the printer bed, if you print these with support. This…
A ball wheel (caster wheel) block for the fischertechnik construction toy system. Needs a steel ball as included in the fischertechnik marble run line with a diameter of 12.66mm. The ball wheel block is meant to be used in turtle like…
See pictures, I guess PETG is better than PLA, but I would be happy for feedback…
Some parts to integrate fischertechnik construction toy and Gravitrax marble run. The base plates are best printed upside down, as supplied. The ft-to-Gravitrax parts (Hoehenstein_auf_ft.stl and Bahnstein_auf_ft.stl) should be rotated…
Ein paar Bausteine, um an fischertechnik Modellen im 15mm Raster Kabelinstallationen verlegen zu können.
A case for the cute LILYGO T-Display-S3 ESP32 module with its ultra fast and sharp TFT display (without touch version), with compatible connectors for fischertechnik. Two I2C connectors at the back need a 2x9 strip of perfboard and two…
Update 2021-01-22: Outdated, an improved version is here . The fischertechnik construction toy system has angular blocks with 7,5°, 15°, 30° and 60°. This is the missing 45° angular block. Connecting eight of them in a circular…
Depending on the gear ratio, the length of your motor will vary, see dimension drawing. That's why I included versions for different reducer lengths. Needs two M3 screws to fasten. If you have a motor without encoder, have a look at…
A variant of the standard fischertechnik connector with two flat sides in three versions with 15mm, 30mm, or 45mm. It is meant for situations when the ft spring cam (Federnocke) will not provide enough stability. Please consider leaving a…
These cheap LED&KEY modules are all over ebay and aliexpress. The TM1638 chip uses a non-bus serial protocol. I made them into an I2C target (slave) device by adding an ATtiny85 which runs my I2Cwrapper firmware with the TM1638liteI2C…
I designed this mousepad mount to easily attach to my Monstertech frame, making my mouse accessible during VR flight sims. It mounts using two M8 30mm bolts and the self-aligning T-nuts from Monstertech. You can find the T-nuts here and…
Simple casing for Arduino Mega Pro Mini . I designed this when I needed a case to be used with the fischertechnik construction system when I experimented with the small LED traffic lights. For a more detailed description, see the project…
fischertechnik Gear Z20 and Z60 for metal flange coupling. Depending on the inner diameter of the flange coupling, these can be used on 4mm axis DC motors (e.g. ZGB25RP and JGA25-370) or 5mm axis DC motors (e.g. Nema stepper motors)…
Needed to have 3rd mfd in my rig. This is mounted with same hardware than other things in Monstertech alu-rig. 8.5mm hole spacing is 40mm. There is also washers included in case you too have too long screws. Mfd is mounted with…
In case you got this combo and dont want to use native solutions for mounting this thing, here is an adapter I'v put together while waiting for the collective preorder to arrive. There are multiple ways to mount this thing, but the one…
The post skirt is a 2 piece design to allow replacement of original 1 piece Timbertech post skirts that are cracked or missing without dismantling the railing or support post. The inside and outside profile closely matches the original.…
This model is a replacement for the Fischertechnik Statikstein 36973. This element appears to be used primarily in the Fischertechnik Dynamic marble runs / Kugelbahn and one I got used had most of them missing, so I designed this…
Mount for Thrustmaster MFD Cougar with Monstertech Table Mount or similar. Print Settings Printer: JGAurora a5x Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: NoName PLA Gray Category: Games
Un soporte creado para tener almacenadas 12 botes de pintura de la marca Timbertech y tenerlo todo organizado.
t's just a support for my airbrush compressor. It might fit to other compressor as its generic. It fits perfectly (i think) for the "NEO for IWATA" airbrush. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
This remix adds shafts in places where moving parts rotate. This change makes it easer to screw full model together becouse you don't need to leave space for parts to move. The orange outline on picture is 0.1mm higher and lower than the…
An update to an earlier design with a proper ft/ftduino-compatible 6-pin connector. There' at least two versions of these things available, that's why there is a short and a long version of the top part. If you are interested in making…
Update 2020-04-21: I made a better 16x2 I2C display here: https://www.thingiverse.com/thing:4301853 Changelog: 2018-10-30: added standalone version without fischertechnik connectors; changed name accordingly A simple enclosure for this…
A working Rzeppa constant velocity joint with only 15 mm diameter and connectors for fischertechnik 4 mm clip axles (Rastachsen). Needs six 3 mm steel balls, I got mine from aliexpress. For postprocessing you'll need a 3 mm drill, a 3 mm…
This is a case for the MPU6050 GY521 gyroscope/accelerometer module with fischertechnik connectors. The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A…
Probably like many of you, i bought the Timbertech airbrush compressor kit to start painting my 3d printed model. and therefore the next step was to buy paint so i bough 2 separated Timbertech acrylic paint kit of 12 30ml bottle each so…
Abdeckplatte für ft-Rollenlager zum Bau von Kabelkanälen. Ein passendes Eckstück (17mm hoch, gleiche Höhe wie Rollenlager + Abdeckplatte) ist auch dabei.
The fischertechnik construction toy system has bow-shaped beams (Bogenstücke) with 60° and 30° as part of their statics line. Combined with the flat girder part (Flachträger) you can construct circular structures with a diameter of 22,9…
Planetengetriebe für fischertechnik. Die Trägerscheibe nimmt 3 Planeten auf. Diese sind in je einem Drehteller gelagert, so dass der Abstand zur Sonne variabel ist. Die Planeten haben modul 1. Zur Verwendung mit der Hohlwelle 10 mm,…
The title says it all. Inspired by an idea from this thread in the fischertechnik community. Please consider leaving a "like" or posting your make as a token of appreciation for my work. Find my other fischertechnik designs here . Print…
OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…
fischertechnik 4mm Shaft Adaptor for ZGB25RP and JGA25-370 motors. The inner diameter of the shaft adapter is 4.25 mm. Try to print with highest resolution for best fit. Category: Robotics
Not much to say Category: Construction Toys
Modified existing Gladiator baseplate to fit Monstertech table mount kit. The print mounts using the hardware supplied with the Monstertech Kit. Printed with eSun PLA-HS at a 0.2 layer height, 4 walls, 4 top and bottom layers, 15% infill…
Various models to print the cases and lids of the remakes of the traditional fischertechnik electronic modules ‘Silberlingen’. ADDED 24-09-2025: case-strip-hills-toppcb-3mm.stl and case-strip-hills-toppcb-1mm that also contain the little…
Holder for Intertechno remote ITT-1500. OpenSCAD file included for customization if needed.
Bauplatte 15x15 mit Clip für fischertechnik Insbesondere beim Bau von Ausstellungsmodellen fehlt ja manchmal eine Abdeckplatte als Kabelclip in der passenden Farbe (z.B. grau) Nachfertigungen sind hiermit schnell gemacht. Print Settings…
As part of their solar energy product line, the fischertechnik construction toy system introduced low voltage DC solar motors a couple of years ago. I never very much liked the limited connection possibilities they offer and their overall…
Fits around the gearbox of a Silver Spark Gearmotor , allowing it to be easily mounted to a flat surface. The mounting holes are sized for M3 through holes, but can be resized by editing the included STEP file. The STEP file is included.…
A housing for the (WaveShare) PCF8574 I2C I/O board, stackable and with a fischertechnik compatible groove at the bottom. Category: Construction Toys
Housing for JGA25-370 DC motor with centric shaft for fischertechnik The end caps can be used for both the (eccentric) ZGB25RP and (centric) JGA25-370 DC motors. The fischertechnik plugs directly contact the small brass lips on the motor,…
This is just a box fitting the ft box 250 separators and the 3D printed Bauplatte 125 designed by Jan ( https://www.thingiverse.com/thing:4226554 ) Category: Construction Toys
Broken fischertechnik building blocks from the "grey" era? Save the black peg parts to build a new one with the color of your own choosing. Hold remarkably well even without glue, but use a drop in any case. Kaputte Steine aus der…
This is a connection plate for fischertechnik construction toy parts.
A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…
Folgende Kombinationen sind möglich: Baustein 15 normal Baustein 15 Rundzapfen Baustein 15 zwei Zapfen Baustein 15 zwei Rundzapfen Baustein 30 normal Baustein 30 Rundzapfen (nicht ft-original!)
On the bottom surface of the recess. Glue 3M Dual Lock The walls and base are 3mm thick. If the layer is 0.2mm, printing takes about 9 hours. Enable support. The original had a non-slip rubber surface underneath. I have a carpet in my…
(English version below) Update 2022-04-28: Permanent-Version mit Silberdraht hinzugefügt (letzte beide Bilder). Auch mit leitfähigem Filament druckbar, aufgrund der hohen Kontaktwiderstände aber kaum brauchbar. (Community…
Drei "Fischertechnik" Achsen, welche die Abflachung über die Ganze Länge Haben
For mounting on fischertechnik 'Bauplatte' (for example 2x red with 4 cams: 38464, or the longer one with 6 rows of clips 31503). Two stones per fingerboard required. With hole for 'Rastachse' 31690 for mounting four 'Seilrolle' 38258…
Fischertechnik adapter for air pressure gauges with BSPT 1/4" and NPT 1/8" threads. Can be used with any M5 fitting and suitable O-ring (e.g. 5x1mm or 6x1.5mm). There's plenty of different types on aliexpress , alternatively you can use…
This is a fischertechnik enclosure for 12V air compressors as available from ebay or pollin . As opposed to the similar looking ft compressor , this model conforms to the ft 15mm standard with a length of 60mm, and offers different…
Tested on Z Offset (4x 1" diameter wheels with these hubs), and First Strike (2x 2" diameter). Both bots have well protected wheels. Across 10 regular combat matches and 2 rumbles I had no issues whatsoever, although they probably would…
Note : As commented by @JBoe in the comments section , this is not a constant velocity angular joint, as I had claimed erroneously before. See his comment for an explanation. Update Nov. 7: I uploaded a real Rzeppa joint design here. An…
I bought these Timbertech paints on Amazon that are kind of squarish (https://www.amazon.ca/dp/B07RM1ZJRK?ref_=cm_sw_r_cp_ud_dp_QXXNTEFYHFP1KM703JP0) and wanted them to stop shifting around in the drawer I kept them in so I made this…
Gedacht als Eckstein für eine Kabelführung durch die ft-Nut
Seilspanner, Gesamthöhe 10 mm, sehr fein einstellbar fischertechnik-kompatibel, Grundfläche 20 * 30 mm (5 mm breiter als ein BS30). Mit Hypozykloidgetriebe 1:56 zum Antrieb der Seiltrommel, nicht rückdrehbar. Gedacht z.B. für Angelschnur.…
I made a fischertechnik enclosure for this HT16K33 based I2C LED dot matrix module I found at aliexpress a while ago, it seems it goes by the name of "1088AS", the PCB is labeled "HW-571". You'll have to desolder the connector and connect…
Print in your choice of material. I favour CF-Nylon for Toughness and rigidity. 0.2mm layers
This is an enclosure for a cheap type of mini pump, making it compatible with the pneumatic program of the fischertechnik construction toy system. As the pump needs 3V as input, a small step-down converter is included in the design, so…
Parts to mount to SG90 mini servo (optionally with built-in support structure): SG90-Gear-Z15: 15-tooth gear SG90-Shoulderplate: 3 grooves for attachments Check out my other fischertechnik compatible parts .
I always felt the Fischertechnik 7,5mm building blocks could need a complementary building block that would allow to not only use them for additional distance, but also as building elements in their own right by enabling perpendicular…
Update 2022-09-19: There was an error in previous versions, please use _v4 FreeCAD file for your own experiments. fischertechnik compatible housing for a 10x10mm electromagnet from aliexpress ("10*10mm Suction 0.3KG DC 5V/12V/24V Mini…
Eine Abdeckung für die Stirnseite von 15x15 Makerbeams.
The classic fischertechnik cam disk ( Schaltscheibe #37727 ) has a 50:50 on/off pattern. With this design you can make any custom pattern. Load the Schaltscheibe v1.FCStd file into FreeCAD, open the spreadsheed and edit the parameters.…
Alpinestars supertech r10 cardo packtalk pro adaptor v2
![Prism Arms - K-Industries Snap On Flared Magwell [For VFC and Vipertech M4/AR GBBR]](https://media.printables.com/media/prints/f3a951ce-22db-42c8-9298-20822710f549/images/10442023_e399e830-748f-4f3d-8001-6d643039444a_15f9fc5a-6c64-42da-8155-6e5445ff795c/20250812_165710.jpg)
