Counting matching models…
Very detailed model, can be printed at 200-300%. Tree Supports - Ensure object xy distance is >1mm from the model. Unfortunately my tree supports were to close to the necklace and I accidentally pulled it off. Brim - Suggested only for…
Diesel depot for model trains H0 1:87 This is based on an actual railroad wagon from “L'Alliance Society An Anvers” dated 1926. I only had 1 picture to go by. The idea is they took the top of the wagon to make the depot tank. Pictures are…
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
A toy locomotive inspired by iconic American diesel locomotives. This model is designed to be printed without assembly. The wheel bases are subtly wound to the center of the locomotive. The diameter of the wheels is also suitable for the…
A while ago I designed, and 3D-printed, a G-scale DHR NDM6 diesel locomotive for a friend. Original: My 3D-model: After seeing the finalized locomotive, I felt I had to share this model with the world. Wow !!! Excellent work, Dick ! To…
Ozdoba na pověšení na stromeček s nápisem “Veselé Vánoce” Materiál: zlatá PLA Tryska: 0,4 mm Teplota: 195/60 °C Vrstva: 0,12 mm Výplň: 100% Perimetry: 2
This is a little Diesel Generator model I tipped up this morning to act as cargo (terrain) on my SCI FY layout. There is a new more detailed version (see photos), but both models are still available. The new model has no stringing (fixed)…
I have modified the BR Class 08 published by Peter Davis at the GaugeOne3DCircle ( https://gaugeone3dcircle.groups.io/g/home/files/BR%2008%20Shunter ) to the Dutch version of this locomotive. Thanks again to Peter for publishing these…
V12 Diesel Turbo Engine model I made the model myself with the help of this course: https://www.youtube.com/playlist?list=PLQl9vsO6sGSlasKFP-CAgnDs324Z6IW8s I haven't had time to complete all the elements yet. There are also a few things…
This is a replacement wall mount plate for the control panel of the popular Chinese diesel heaters, as used in many self-built motorhomes. It clips the control panel into place the same as the original mount using the same screw…
Remix perníkového skládacího domečku od Nakozena s českým textem "Veselé vánoce". Doporučuji změnit barvu filamentu na vrstvě 10. Remix of Nakozen's Gingerbread House Kit Card with Czech text "Veselé vánoce". I recommend to change…
Simple model to elevate the diesel heater so the exhaust pipe does not come in contact with anything. This is for the tall and slim all in one models. I used 4 M5 screws that thread into the plastic foot. But if you have a screw long…
HARDWARE NEEDED: 4 x m5 heated inserts 4 x m5x12 screws 4 x m3 heated inserts 4 x m3x8 screws PRINT SETTINGS: Base: Infill: 20% Walls: 3 Support: Yes, Normal (manual) Tube: Infill: 20% Walls: 4 Support: Yes, Tree (auto) Controller Mount:…
This model was designed for Ford easy fuel system especially for Diesel system for add any aditive during winter season as easy as possible. Just push this funnel into your easy fuel system and you have hthen access to your fuel tank.…
Diesel exhaust stacks meant for 1/10 scale rc crawlers. 4 mounting holes meant for 3m hardware.
Print upright, no supports required. Use multiple walls for fuel transfer integrity & strength. Best chemical resistance is probably with PETG. I printed the original with 95A TPU. Use at your own risk. Do not leave nozzle in adapter…
Baňka na pověšení na stromeček s nápisem “Krásné Vánoce” Tisknuto na Creality Ender 3 Materiál: bílá/zlatá PLA Tryska: 0,4 mm Teplota: 200/60 °C Vrstva: 0,12 mm Výplň: 100% Perimetry: 2
One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…
Malý betlém, který se posadí na váš stůl nebo poličku, nebo provlékněte nit skrz přiložené otvory ve střeše a pověsíte ji na strom nebo jinde!
Use a filament that can withstand the temperatures. ABS works fine.
A little gas can to go with your scale garage.
These parts were inspired from a design by KeeganBuilds (YouTube). I modeled these parts in OpenSCAD to fit the components from a 2 kW diesel heater kit and have included the .SCAD files below so others can modify to fit heaters with…
Adaptor to change the 80mm Dia to one which can be between the zipper. Fusion360 files included.
might be a bit to small so I didn't make the barrel move
I use this in my Beseler 23C series II to print negatives from my Fuji GW690. I opted to design the carrier as two separate parts with a few interlocking registration features rather than trying to integrate a hinge as the metal…
https://nl.wikipedia.org/wiki/NS_2200 24FEB2025: Laatste wijzigingen doorgevoerd. Nog uit te voeren aanpassingen en toevoegingen: Montage van Märklin koppelingen Stekkers voor trein-schakeling (multiple schakeling) op de bufferbalken.…
I know there are a bunch of these out there already. I just wanted to make a version for my 10 oz bottles. Print in ASA/ABS and enjoy. I attached using the screws shown in the pictures but feel free to use what you prefer. The .3mf file…
Tahle vánoční ozdoba je věnována všem českým a Slovenským 3D tiskařům, a hlavně všem začátečníkům kteří si ještě prozatím nemohou vymodelovat svoji vlastní. Ozdobte si touto vánoční zdobou stromek a podpořte české Vánoce, jak se sluší a…
A simple coupling as an extension for an Diesel locomotive: link here Printing without supports. Assembly is easy, just push from one side. UPDATE: Improved connection
In Diameter 75.8 mm Chinese diesel Air Heater Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Automotive
Kleines Gadget für Oldtimerfreunde
Santa Claus 3 colors print : of layers depends on layer high, but: 0 - 1mm high = white 1mm - 1,6mm = red 1,6mm - 2,2mm = black infill 100% recommended Print instructions 3 colors print : of layers depends on layer high, but: 0 - 1mm high…
Das ist ein Tool zum Stricken für Erwachsene. z.B.: für Handschuhe oder Socken Es hat 21 Pegs und einen Durchmesser von 120mm. This is a knitting tool. Example: gloves or socks It has 21 pegs and a diameter of 120mm Filament: PLA Nozle:…
Nápis Veselé Vánoce na zavěšení na stromeček nebo se stojánkem jako dekorace na poličku.
A friend needed an adapter for the air intake of his cheap chinese heater to a standard fire hose copling. The intent ist to create a mobile heating box. So this maybe useful for similar projects. Please note: This is meant for the intake…
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)! This funnel works for both diesel additives and fuel, and opens a standard UK misfuel protection flap on diesel cars, like a forecourt nozzle.…
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Ever wondered why a chunk of machined aluminum with a piece of glass in it goes for $200 on eBay? Me too. After printing for years using my Beseler 45MXT and glassless negative carriers in all major formats (35mm, 6x6, 6x7, 6x9, 4x5), I…
Ozdoba na zavesenie na stromček s nápisom “Veselé Vianoce” (SK verzia) CZ verze zde: https://www.printables.com/cs/model/677848-vesele-vanoce Materiál: biele PLA Tryska: 0,4 mm Teplota: 205/55 °C Vrstva: 0,20 mm Výplň: 100% Perimetry: 2
Baywatch bow keychain Print Settings Rafts: No Supports: Yes Infill: 60% Category: 3D Printing
While this might be product-specific (Vevor 2500W diesel heater), it should work with other fuel tanks. The stock fuel cap is vented by means of a simple pinhole, which means that any enclosed space that contains the fuel tanks sooner or…
Version with text "VESELÉ VIANOCE" for my Slovak brothers and sisters :-) Veď sme jedna rodina (alespoň tá moja určite). Not printed. Print instructions Category: Kitchen & Dining
needed a quick solution for my 8kw China Diesel Heater, the gasket broke when i repaired it
Vin Diesel – Paint-It-Yourself Figurine A blank, matte-white model inspired by the tough-yet-loyal spirit of Vin Diesel. This DIY collectible captures his iconic presence in a bold, minimal form—perfect for fans of action, family, and…
About A small toy diesel locomotive with opening doors and roof, and real working brakes. This locomotive fits popular brick figures. All elements are very easy to print even for begginers (do not require the use of supports). All parts…
I love truck & tractor pulls, hence why I made this model. Assembly instructions are in a PDF. I used 1.8mm brass rod for the axles. Tires can be optionally TPU. If there's any problems, let me know! I wanna make this as easy to…
Jeder Stein wird 6x benötigt. Anleitung Eselspiel Inhalt: 121 Steine, 6x Zahlen von 1 bis 20 und ein Stein mit dem Esel Ziel des Spiels: Alle Steine müssen Aufgedeckt sein. Sie müssen in 6 Stapeln in der Mitte liegen. Die Stapel müssen…
Die Clips habe ich für Standard Benzinkanister 20l aus Kunststoff gezeichnet mit einem Griffdurchmesser von 30mm Es gibt 1/25 1/30 1/50 Benzin Diesel Den Filamentwechsel habe ich bei 1mm gemacht Für die kleinen 5l Kanister einfach auf 83%…
Better distributes hot air in the trailer, making it more comfortable - gets rid of cold spots. Uses non-standard internal diameter, as the hole is sized for RV bayonet sewer mount (as used in Hiker Trailers for A/C connector). The hex…
Went to fill my DEF tank the other day and stuck the DEF nozzle right in the cap-less filler for diesel fuel. Fortunately, I caught myself before I was forced to learn an expensive lesson. I thought a plug to go in the capless filler hole…
This model was designed to go along with a custom 0-6-0 chassis that works with 0-4-0 shells. so this motor is compatible with non-cylinder Hornby 0-4-0 chassis. the shell was made to resemble an old Tri-ang 08 diesel shunter I got at a…
(English below) Wieder so ein Kleinteil, das gerne mal bei deinem Audi 80 B4 bzw. Audi 100/A6 C4 abhanden kommt: Dieser kleine Schiebeschalter der Leseleuchten in den Angstgriffen (Teilenummer der Leseleuchten zum Vergleich: Audi 895 947…
a fast and easy to print knitting doll
A 35mm Remix of @bnn_229452 's 6x9 Negative Carrier for a Beseler 23C Enlarger
I printed this with my resin printer with standard setting. This may also work when printed with an FDM printer. Please let me know if you tried it.
DB BR365 diesel locomotive compatible to IKEA, BRIO, etc. wooden railways. Required non-printed parts: 2x magnet ø 6mm x 3mm 12x screw M2 x 4mm 8x screw M2 x 10mm Building instructions Step 1: Attach the front to the base by use of 2x M2…
Print from PETG atleast If needed, print the seal from TPU
About It gets pretty cold where I live and the heater I bought wasnt cutting it. Everyone has one of these diesel heaters according to youtube, so I decided to try one. The intake and exhaust come out of the bottom and if you dont put it…
Suitable for refueling from a canister or adding additives to diesel. Diameter 25mm. Printed from PETG material
M14x1.5 Schutzkappe für Diesel-Injektoren und Rail-Hochdruckspeicher. Ideal für den Wechsel von Injektoren um Schmutz im Kraftstoffsystem zu vermeiden. PETG oder ASA ist empfehlenswert, PLA hat aber bei heißem Motor ebenfalls funktioniert.
Diesel Heater Air Intake Redirect – 90° Adapter for Vertical Mounting When mounted vertically, the original inlet nozzle of the diesel heater obstructs proper installation or alignment (see attached image). This 3D-printable adapter…
Das ist ein Tool zum Stricken für Kinder. z.B.: für Kinderhandschuhe oder Kindersocken This is a knitting tool for children. Example: children's gloves or children's socks Filament: PLA Nozle: 0,5 mm Category: Hobby
A quick and dirty remix of @bnn_229452 's 6x9 negative carrier for a Beseler 23cii Enlarger
Bull nose front end for 8 wide Lego trains. Modeled on the E7 locomotive but can be used in many other class trains. Seen in photos is a Victorian railways A class mock up (not final build). Variants include bonnet with or without the…
Ich habe mich einmal hingesetzt und das bekannte Spiel rund um die sechs nachgebaut. Es werden 40 Stäbe und ein Würfel mit sechs Augen zum Spielen benötigt, die Stäbe in Zehnerpacks habe ich ebenfalls hochgeladen. Die Regeln: Jeder…
gauge 1 diesel 10/BR CLASS 42 I remixed because I was board.
Just use the bring and 4 perimeters. 0.3mm Layers Draft. PETG
This is a knitting tool, wich is usually made out of wood and wire. The challenge was to make the thin hoops strong enough and also knittable. This was tested and approved by a knitting grandma so the design works in practice. Here is a…
Skalieren Sie sich für sämtliche im Modellbau üblichen Maßstäbe Ihre eigenen Kanister! Tanke schön!
designed for 1/16 scale but can be scaled to prefered size.
All credit to the original designer. I made his version but Thingiverse wouldn't allow .3mf file upload for BambuLab P1S to assist others readily impolementing a change of infill for the uppermost part of the model to enhance strength.…
Dieseltriebwagen or diesel multiple unit for wooden railways compatible to BRIO, IKEA, etc. Required parts (per wagon): 3x M2x16mm (total 6x) 1x M2x10mm (total 2x) 1x Ø 6mm x 3mm magnet (total 2x) Building instructions Assemble 4 wheels…
cool easter czechia decoreit
Benzin auf Dieselstutzen Adapter Bei "modernen" Auto ist es nicht ohne weiteres möglich mit einem Benzinstutzen ein Dieselauto zu betanken. Das hat den Vorteil, dass man an der Tankstelle nicht aus versehen Benzin in ein Dieselauto kippt.…
A simple stackable box for silica gel Category: 3D Printer Accessories
Spliced together Silver_Surfer234 's 2kw intake screen and Schaffer.la 's linear drain screen to make a less restrictive screen, increasing the air flow by approximately 20% or more. This is especially helpful when you have extensive…
--Magyar-- Volvo turbo diesel embléma formázási ferdeséggel ellátva öntés miatt. Képen alumíniumból öntött kész termék látható. Ez egyik kedves ismerősömnek készült 2024-es karácsonyra ajándéknak. --English-- Volvo turbo diesel emblem…
9g micro servo mount for 90mm distribution flap from LF Bros. Not tested on Webasto or Ebersprächer flap. Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: Yes Resolution: 0.2mm Infill: 30% Filament: Sunlu PET-G…
I had to replace the batteries (Yes there are 4 inside) of my Diesel DZ-7313 watch without having special tool nor purchasing it. Everything started year ago with the opener I designed for my Ice-Watch →…
Blame Bill from the Youtube channel BillMakingStuff. I saw him building models for the tabletop game TONKS and figured why not design a stubby little tank for TONKS. Enjoy!
I was concerned with the potential risk of water, dust and debris lying on the fuel inlet so decided to design and print the fuel cap for my Ford Ranger 2024 model (should fit from model year 2023) - Photograph shows inlet dimension of…
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)! A compact, light, and quick-to-print diesel funnel, suitable for additives and diesel fuel itself. The funnel opens a standard UK misfuel…
In Diameter 75.8 mm Chinese diesel Air Heater Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Automotive
Remix to fit Diesella 10 215 150 I printed a case and forgot some clearances, but it should be fixed now.
I developed this series to address the limited options for diesel heater ducting components. While I came across similar concepts, I couldn't find anyone offering a quick-connect, quick-release design with a cap. I printed these parts in…
Printed mine in ASA with 5 Walls
This replaces the inner barrel of the Maxim Pro nose. It is a drop-in replacement. Print smaller end down. May need light supports or a brim depending on your print settings. Choke designed by Diesell.
Fusion de Fonctionnalité et d'Art : Adapteur de Jauge de Turbo Ford Fiesta 2005 Plongez dans un monde où la fonctionnalité rencontre l'esthétique . Avec mon Adatateur de Manomètre de turbo pour une Ford Fiesta diesel de 2005, il se place…
Werkzeug zum Abziehen der Glühkerzenstecker ohne eine Spezialgange (VW 3314). Tool for removing glow plug connectors without a special tool (VW 3314).
I wanted a trem blocker for my Kiesel Vader and saw I could just insert wood or plastic in the gaps. A few iterations later and I had something that worked reasonably well. This was one of my first CAD models and as such could likely be…
This tool is a perfectly snug fit to safely remove fuel filter on a Kubota Loboy Diesel Generator and B8200 Tractor without damaging it. 3D PRINTING SETTINGS 0.15 100% Infill PETG
I have a diesel heater from Vevor for camping. I designed this cover because the display is built in and is not water proof. Now the heater can stay outside without any modifications. I designed the cover so it does not need support. Just…
Diesel Heater Legs with 85mm hole distance
I was frustrated to see that the Vevor diesel heater air inlet was a special threaded attachment. This adapter will thread into the Vevor Diesel heater housing and adapt to the standard 3" or 75mm duct size. The adapter also aims to take…
Dummy Diesel V8 engine to placed in batery Original file full motor Author: https://grabcad.com/alex.dd-1 THIS IS A MOCKUP NO ORIGINAL DIMENSIONS For use in the original QC60 battery compartment and similar trucks. I recommend using paper…
I modified the 6.9 carrier that 'bnn' made and changed it to 6x7. Actual opening is 55x68mm. I am happy to generate other size negative holders. I did not adjust the pins for the negative holder in the first version. V2 solves this. I…
Features: Holds hundreds of lbs if mounted over a wall stud Top module now just has a single centered mounting hole (works better when installing over a stud) Top module now has rounded inner edges Zeus bottom module was highly remixed…
This adapter allows you to connect a standard 80mm duct/hose to your Vevor 2kW diesel heater. It is designed to replicate the original bayonet locking mechanism for a secure twist-and-lock fit directly onto the heater unit, providing a…
zusammen streckbares trinkspiel
