Counting matching models…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for one variant
VW Bus Pen Holder with Accessories for someone who wants to decorate and organize his desk! HowToPrint : - Recommended Layer Height: 0,2mm ( 0,1mm / 0,05 for Logo & Lights) - Support: No - Infill: 20-25 % - PLA / PETG works fine. -…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
Festool Mobile drilling attachment MB 40 - Accessories Do you already know our Mobile drilling attachment? The MB 40 mobile drilling attachment is your companion when precision is required. Print your own Festool Accessories for the MB 40…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Vytiskneme všechny tři části. 1. Hlavní box 2. víko 3. mříž Díly 3 a 2 k sobě přilepíme lepidlem. Box umístíme na zahrádku vozidla a přilepíme nebo pomocí preferovaných otvorů přivážeme. Víko doporučujeme zajistit “gumicukem”
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Nespresso Capsule Holder - remodeled
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
Mounts: These mounts were designed for Mead® White Board 85356 to allow the board to be quickly removed from the wall without tools (post installation). The mounts work by allowing the board to sit on the Bottom Mounts and swiveling the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Cute cat along with accessories for the dollhouse. No supports.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
The water tank lid for our Nespresso Vertuo coffee maker got lost while moving house, so this was the perfect excuse to take a break from moving furniture around. I modelled a new lid in Fusion 360 and printed this on my Ender 3v2. I used…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for one variant
Printed in PLA. This plunger works well with the compatible silo: https://www.printables.com/model/919556-senseo-silo-for-coffee-grind
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
La vasca originale per la raccolta del caffè non funzionava, colava caffé nella parte inferiore, così ho creato una nuova vasca ed ora non ci sono più perdite di caffé. Il piede è stato stampato in un altro colore e poi incollato con…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
This is a fan model I made for a neighbor's compressor for which the fan had broke.
Print approx. €10.46–€12.79 excl. taxPreliminary estimate for one variant
This is a 3D-printable pig nose , designed specifically to fit Bunchems (the small spiky balls that stick together). The nose features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and easy…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Box for handgun cleaning accessories and others!
Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant
standing Nespresso caffee capsule holder 2 line with cut out for easier use.
Print approx. €8.70–€10.63 excl. taxPreliminary estimate for one variant
IKEA PAX Mouse Holder – Stylish and Practical Accessory Storage Keep your workspace clean and organized with this custom-designed mouse holder, perfectly compatible with the IKEA PAX wardrobe system! This holder allows you to neatly hang…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
These are 3D-printable narrow eyes , designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes have a simple, round and narrow design , intended as a clean and minimal alternative to larger eye models.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
the cover for the power knob is modeled as separate bodies so it can be used on an mmu. the gcode for it uses .2mm layers, and all petg settings which will also print ninjaflex which is the what i used on the bottom of the cap to lightly…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
A set of bins to hold most of the go3s delivery and motorcycle helmet mount 2x2x9u containing the go3s unit and motorcycle mount 2x2x3u containing the necklace mount 1x2x6u containing the stand mount (T shaped objet) 1x2x6u containing the…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Diglett from pokemon quest I spray painted the nose and base and printed the singlet and the white and black parts each color separate in file other then those spray painted.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
My Cecotec Conga Rockstar 1500 Ray Pure came with a furniture brush and a crevice tool, and that's it. This adapter goes between its hand-tool fitting and a standard 32 mm accessory kit, so you can use a proper soft dusting brush. Both…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
This is a small accessory pack for Dummy 13 ( Version 1.0 / Beta ) These accessories were designed alongside Dummy 13 by the original creator. Consider this a nice starter set before jumping into the hundreds of community remixes! This…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
Support the designer: Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the…
IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Description These models are made to enhance your Prusa USS Drybox experience, bringing additional compatibility and expanding the range of options. Before you start, read the article, which contains all the important info. What can you…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
Some Requires supports please join my discussions group https://www.printables.com/group/kaleb08-upcoming-models-oQJxrGR
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
I have created a set of accessories that will help you organize and improve your workflow. All stl models that contain the "festool" logo have the logo incorporated, which can be divided into parts for multicolor use, or split into…
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
Update 7/5/2025 I really appreciate all the support and attention you've all given to my work. I wanted to make something that would be useful for a lot of people, and the response has been far greater than I ever expected. That said,…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Assorted pegboard accessories. Made to fit http://www.biltema.se/sv/Verktyg/Arbetsbank-och-forvaring/Verktygstavla-och-hallare/Verktygstavla-2000022183/ but probably fits most pegboards. I've succesfully printed most of these without…
Summary This is a 1:24 scale model of a waste bin / trash can in a kit card style. Versions The complete sets are available in a 3MF file for a one-color print. There are 3MF-files with predefined colors intended for users of AMS or MMU.…
Building on Anachronist's Nuts & Bolt Baby Dexterity toy, this version keeps the same screw dimensions but provides varying nut external dimensions. Your toddler can have fun stacking them in order of size (or in any order that pleases…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
This remix of my original Flat Pack Mini Box is customizable within PrusaSlicer and has the following features: Stores 9 Lucky 13 hands in sockets UPDATE: alternate version for 9 Mini 13 hands on ball posts Stores two original Lucky 13…
i have included both stl and 3mf files for this. its 55mm height. no ams is needed cause you can print the coffee separately. printed both parts at 0,28 layer height. Archimedean chords for top layers for the coffee. slow first layer.…
Keep your pneumatic tools organized and always within reach! This wall-mounted holder is designed for air compressor tools such as impact wrenches, air ratchets, blow guns, tire inflators and die grinders. The holder keeps your workshop…
I got a first-gen Nespresso machine eons back and immediately printed out some dispensers for the pods. In fact, these were some of my earlierst prints and the first functional prints allowed in the public spaces of the house. So when I…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock. I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and…
Taken from Thingiverse: https://www.thingiverse.com/thing:3679094
For M5 C Click Here Update 4/17/2023: v0.04, uniformalized all the drawings. I've also added more tolerance to the magnet pockets from 2mm to 2.20mm Update 4/11/2023: v0.03, Modified height dimensions to accommodate ThisFact's M5 Build…
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial All files have been test print on a MK3s+/CR10s printed in PETG. If there's a piece missing shoot me a…
This adapter is designed to hold all the accessories that came with the Dyson V11 vacuum in a small space envelope. A smaller version is also available. Accessories do not obstruct each other and can be accessed freely and easily.…
Source / Attribution: These are remixed from https://www.thingiverse.com/thing:2860289 . I wanted to clean up the F3D file so I could follow it and create some additional mounts. Having done that, it makes sense to release my updates back…
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
I wanted a place to store Lucky 13 and his extra hands and accessories so I whipped this up. Probably could use some tweaking but it holds 12 hands, has a place for his hat, and can hold a number of accessories on the back of the lid.
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
hit the like button if you downloaded it, so i can get the prusa meter , thanks Update 2024.10.12 (V2) Wall thickness 2 mm, strong enough for a case and faster to print Dummy Case depth 25 mm Toolbox depth option, Short 25mm, Medium 30mm,…
10/26/2022. Updated to include single piece double holder at the request of a user. The new added stl is 293mm long and is not for every printer. After getting a Nespresso coffee maker I found tons of great pod holders for the original…
Found a ribbon for the wreath and sized it to fit in the wreath model. Sliced to print and glue to avoid supports.
A holder to store more than the default two accessories. You have to drill a 4mm hole to the base to mount the holder using a M4 screw and nut. The right arm can be mirrored to have an additional slot. Support my work For non-Prusa parts…
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Nespresso dispenser Print instructions PLA 15% infill
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Small shoes. Big style. Give your LUCKY 13 figure a fresh look with a pair of Nike-style shoes. These small sneaker accessories add a distinctive finishing touch to your figure's outfit. The download contains the shoes only. The LUCKY 13…
Since the included wall mount of the Dyson V12 Slim only has room for two accessories, I built myself additional wall mounts. I mounted the wall mounts with tesa Powerstrips. But they can also be screwed. The larger hole is to get with…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and all addons 5 perimeters to screw and head of screw…
This 3D owl keychain is not just cute — it magically shifts color depending on the light and angle. Minimalist, smooth, and sleek, it’s the perfect eye-catching accessory to elevate your keys, bag, or belt loop. Lightweight, durable, and…
Style and Function This little case was a hobby project of mine. Created using Onshape, all of the hinges, clasps and specialized storage fasteners were carefully designed, printed, tested and iterated multiple times in order to optimize…
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
These are accessory side bin/tool tray for AnkerMake M5. For Accessory Bin2 with simplified printing and assembly, please see this link I created these to hold leftover filament from skirts, brims, and fallen supports. In this package,…
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
Please report a portafilter or other equipment that is not fitting, plus its dimensions. The tamper station features: holding the portafilter for preparing the puck (adjustable via vertical screw) storing two bigger 51-54 mm or 58 mm…
Here is an OpenSCAD library to generate accessories for the IKEA Skådis pegboard . Check the instruction linked below for the usage: https://github.com/franpoli/OpenSCADutil/tree/master/libraries/ikea_skadis_pegboard_accessories Download…
This socom silencer should be compatible with my gb-22.
I created this box for my DREMEL accessory as a compact organizer that can be handy along. If you noticed the top and bottom, its because I have used a carbon fiber textured build plate, though you can use your preferred build plates…
Like, print and share! Dyson accessory holder for wall mounting. Compatible with Dyson V7-V11. V15 (verified by user) reversible, works with front release mechanism or facing the wall. works with simple and motorized accessories different…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
Easy printable cool bow tie for every occasion. Choose your color and infill you like. Model contains buckles needed for fitting the strap around your neck (simple buckle + original magnetic buckle). Print instructions Bow tie: .2mm…
My 2 year daughter has just started playing with Play-Doh. I designed a bunch of fun shapes and Montessori shapes too. My wife is a Montessori Teacher and I thought it would be useful during play time. Enjoy! Print instructions…
This is the second of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
We’ve teamed up once again with Printables.com for a complex design challenge ! This time, you’ll get to choose from three different modular products to make your own. Cooler Master’s FreeForm 2.0 philosophy is all about giving makers the…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
I have quite deep drawers in my shop, and I hate it to waste alot of space, so this gridfinity-bins are for all kinds of rotary-tool (aka. Dremel) tools and accessories and they are stackable. They are all in a 2x2 unit footprint for…
This organizer was designed from scratch in Fusion 360, inspired by a concept image generated using AI. It features multiple compartments for pens, stationery, hobby tools, and small containers. The model is optimized for clean 3D…
