Counting matching models…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
A fun little marble maze. No supports required, and assembly is 100% snap-together using ball and socket joints. No hardware or glue required. Requires one marble (not included). Parts base.stl - 1 maze.stl - 1 axle-cam.stl - 2…
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
Overview An ethereal and light statue that shows love in artish style. I found that picture on internet as a tattoo on somebody arm and I had to bring it to the world of 3d printing. I recreated and changed it a bit so that it could be…
This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…
Add a practical hanging point to the back of the seat and make better use of the luggage compartment. This 3D-printable fold-out hook provides a convenient place to hang lightweight everyday items such as shopping bags, small accessories…
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Ethernet (RJ45) Port Dust Cover cap with grip for easy removal. Just added: New slimmer/narrow model for switches with closely spaced ports. Check out all other port covers: USB-A port cover -…
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…
This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
I like to print things that don't need glued together, so I remixed the original model to be screwed together instead.
This is my attempt for a universal cable labeling system. The label holder consists of a main part and a snapable cover. Labels can be stuck to the main part's flat surface or inserted into the cover if they are not sticky. Thus, using…
This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports
This model consists of two parts: The stone border: Use a black or dark color. I recommend default settings (0.4 nozzle, 0.2 layer, no supports) The portal: For best authentic look, use a purple color. I recommend a plain print sheet with…
Update: There are now 2 versions of the lock together screw trays. 1) Modular lock together screw trays - Silver coloured in the pictures. These are flat bottom and print with no support. 2) Stacking nesting screw trays - Green coloured…
3d printable ethernet cable label, print in one piece without support, compliant hinge system. I posted 3 sizes but add a comment if you wish another one, or use the fusion file I posted 3D PRINTING SETTINGS 0.12mm
This kitcard is designed in Fusion360. The model from fotos is printed on Prusa mini+ with nozzle 0,4mm. Material is Prusament PLA vanilla white. You can check the print file for more info but its easy and fast print. Please share your…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…
for easy storing my network cable during traveling. It is for 20m cable length. i modified it for 10m as well see on Prusaprinters. https://www.prusaprinters.org/prints/47891-cable-spool-ethernet-cable-10m
This is a remix of RealAbsurdity's wonderful "Modular Snap-Fit Saturn V" rocket design from thingiverse, but I re-built it for printing on my Prusa MMU2S! The coloration is based on as many pictures of Apollo-era Saturn V as I could find,…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Build your own custom-sized frame…
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
💻Ethernet Cable Runners💻 Nozzle 0.4mm Print 0.2mm Infill 50% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→ ALL COLLECTIONS info: 👤Account link to share it= idea-prints…
CLIPGEAR is an infinitely expandable, modular gear system. Snap the bases together, clip the gears on, and build your own mechanical creations - or simply use it as a satisfying fidget ! The system is designed to be simple, lightweight,…
Update: Added x2 and x1 clips Simple wall clip for UTP/ethernet cables reuploaded from Thingiverse , original design by Agustin_Pulido
Ethereal Kiss Statuette in frame Use Wall Generator: arachne
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
This is a cable comb for Cat 5e Ethernet Cables. Looking for a Cat 6 variant of this model? <Click Here> ← To be updated
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…
Lucky 13 hands - arranged together for better printing If you like it --> press like it :-) With the original file "[A2] hands.stl" you have to take care of the bed adhesion, because of low contact surface of each hand. I rearranged the…
As almost all PET bottles in the EU now have the new design with the tethered cap and all current existing cap 3d models don't work anymore, I took one and recreated it. It implements the important sealing lip, which seals the bottle on…
This model is based on the Gridfinity baseplates by Zack Freedman. You can find the original model here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925 I really like my version of the Gridfinity modular…
These are 3D-printed 9mm Parabellum scale replicas. The bullets screws into the casing so they can be printed different colors and don't need glue to be assembled. I design full metal jacket, hollow point, and frangible bullets that all…
please make adjustments to the size of you phone and please print at low speeds
update: This model has updated to v2 having now stress relief for power and ethernet cable. --- Stress relief for Prusa Mini power and ethernet cable. I felt like the power plug moved too much and possibly caused stress for the power…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Cable manage ethernet runs with some spacers I made. If you want more sizes just ask and I can upload them 👍 Currently Supported Sizes 5x2 5x2 -1 4x2 3x2 2x2 1x2 5x1 4x1 3x1 2x1
An anti-tamper lock for RJ45 Ethernet Cable connectors. I have cleaned up the original, made the hole smaller and cut off two of the corners to make it fit in more scenarios
An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…
This model prints flat, then folds into a dodecahedron frame. The inner sides snap together (as shown in the video below) to hold the shape without any additional connectors. Print in PETG (as PLA is not sturdy enough) at 0.2 mm layer…
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
I needed access to a few more USB ports on my Voron 2.4. I already had the USB keystones on hand from Amazon https://www.amazon.com/gp/product/B07Z94HYFG?th=1 There is very little space inthe honeycomb to mount anything, so I designed…
Version 5 Features: SNAP TOGETHER DESIGN MOVING SIDE-RODS ROTATING WHEELS MAGNETS FOR COUPLING TRUCKS (OPTIONAL) NO SUPPORTS FITS COMMON KIDS WOODEN TRACK (20mm between wheels) WORKS WITH THOMAS WOOD SERIES, TAKE ALONG, AND TAKE N PLAY…
This wall mount is designed for the Starlink Ethernet Adapter. There is room for the cables to connect into both sides. Optimal design for 3D printing, made to be strong, durable, and reliable. The Starlink Ethernet Adapter fits tightly…
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
This is an ethernet dummy plug to reserve or protect a network port. It is designed to be printed on its side for strength of the clip. I included a plain version and one with a clip protector. I also included a version with and without a…
Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…
Ethernet cable clips and cover for routing along walls. Uses standard course drywall, #5 or similar screws. Versions for one through four cables are included. The cover was intended for routing the cables through a wall near a corner. One…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🎉 Hey Adventurer! 🐉⚔🧙 If you love this 3D model – you're just scratching the surface! 🌟 🔥 The full collection from this series (and tons more!) is waiting for you over on my Patreon :…
10" Rack Mount Bracket Ethernet Switch TpLink 8 port Flat version – Use this if you don’t have space issues between rack units (you can print this model horizontally); Standard version – Provides extra inter-unit clearance. Choose this if…
just print and screw the pieces together to help straighten the ethernet cables and makes it easier on your hands Can be used with a heat insert or tap out the 0.2mm 1st layer and a just use an 3m nut Hardware: M3x3.6 or 4mm heat insert…
Screw together modular wizard's wand with three different tops. Prints without supports
Update: 13.10.2026 – expansion of the list of supported and community-tested models. 6,10.2026 “Thanks to the community, the models have been tested — see details below. Thank you for the feedback.” @AGB84 - Golf 7 @rpeservis - Skoda…
Oversized twenty sided die that you fold up to assemble - it snaps together. This has 2 great advantages - that first smooth layer is all over the die surface and you can change filament colour for contrast numbering. Print instructions…
~Better Together Series 💘 The Better Together series keeps growing with this adorable duo of love-struck piggies 🐷💖 All animals in the collection are fully compatible and can be mixed & matched freely . Magnets are optional, but highly…
A companion cube from the video game Portal. Designed by Andrew Lindsey and available on Thingiverse here: https://www.thingiverse.com/thing:173570 I printed this as a cake topper for my Son's birthday cake. See the above Thingiverse link…
This is a remix of Ethernet Port Dust Cap/Cover - No Supports from kerngebiet with a larger base for easier printing and easier extraction of the cover. The initial design was a bit loose in my ethernet ports, therefore I added a 105%…
An ethereal and light statue that shows family love in artish style. To print it good there is need good adhesion to bed. Have fun
This is a snap-together case for the VisionFive 2 single board computer. I have included both a slotted version (which you'll probably want if you just want to use it as-is) and a solid version (primarily for if you'd like to modify the…
for easy storing my network cable during traveling. It is for 10m cable length. 20m variant https://www.prusaprinters.org/prints/27496-cable-spool-ethernet-cable
Snap-together rolling ball with semi-round smaller ball inside so it doesn't roll straight. No glue needed. My cats love them! I also cut off small bells from broken cat toys and add them inside to make new cat toys. The ball is printed…
Original needed supports all over. Cut into 4 individual parts that click together and the big parts can be printed with no support. Tail and tower will need structure. Easy to cut off though. Printing Tip: Print the front and back Hulls…
A parametric, hermaphroditic, snap-together hinge. Two identical parts will snap together to form a complete hinge. Can be used as an actual hinge, or for assembling polyhedrons from a set of individual faces. tabs : number of tabs (and…
A spectral ghost sculpture with flame-like wisps flowing from its head and tail. This model is designed to push your printer and your support-removal skills to the limit. Includes two versions: a full standing model and a split version.…
This is a 3D printable, screw-together draw ball inspired by the iconic lottery balls used in UEFA Champions League draws. It’s perfect for raffles, giveaways, tournaments, or even classroom games. The ball consists of two threaded halves…
Updated 11/1/2022 to add square version of card. The original dimensions are 148mm x 78mm x 1.44mm. At 0.30mm layer height, it will take 37m to print. The square dimensions are 188.7mm x 188.7mm x 2.5mm. At 0.30mm layer height, it will…
Rasperry Pi 5 Case - Modular Snap Together This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks , originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4 . I've updated the design to make it fully…
Easter Egg Container - Screw-together Design A fun and functional Easter egg container that prints in two parts and screws together with a neat internal thread. Ideal for hiding treats, small gifts, or just as a seasonal decoration. 🐣…
This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a…
Overview A couple embracing in heart frame An ethereal and light statue that shows love in artish style. This is my 3d print adaptation of the drawing by ngupakarti from pngtree.com Instruction To print it good there is need good adhesion…
I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…
Made a shield to fix the illumination from my wifi accesspoint led light. Tape didn't cover the light enough. Using a printed piece makes it removeable again. Best to print with some more infill and darker color to block the light.
Designed to fit flat ethernet cables. Insert your cable into the center of the spool before snaping it together. coil the cable and push the free end through one of the hexagonal holes to hold the cable in place. Both ends of the cable…
🇳🇱 Welkom in Nederland! Welcome to the Netherlands! This model was designed by Dany Sánchez in 2015. One of the most recognizable historical architecture of many cities in the Netherlands and Belgium, especially Flanders, are thin brick…
This is a problem that has plagued me for over 20 years. I was so pleased to see several 3D printed solutions. Unfortunately the original design by guss67 typically requires supports. To combat this there are designs that print in the…
V2 UPDATE You need: 1 Body (Gray) 1 Rear Cover (Gray) 1 Inset Plate (Black) 3 Buttons (2 Blue, 3 White) 2 Switches (White) 3 Switch Retainers (Any Color) 1 Jack (Silver) 1 Knob (Silver) 1 Switch OR Alternate Switch (Gray) 4 #8 x 3/8" OR…
Quick print to house ESP32 D1 Mini. Snaps together with cutouts for USB, LEDs and a paper-clip hole for reset.
I'm sure this will work for other cars, but this is specifically the kind that pops into the back of the gas cap and attaches to the door. I've included the Fusion 360 file and a STEP file in case you want to modify it. EDIT: Added my 3mf…
I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…
Based on beedback suggested print scale is 97% to fit AirTags well. After seeing the prices of holders for the Apples new Airtags I decided to make ones myself, after all I do have a 3D printer just for this kind of stuff! Remixed a case…
A simple slot together stand for model aircraft. Ours was lost so this was a replacement designed to suit the pictured model. Fitting the two pieces together is tight, you may need to shave off a little plastic with a file or knife…
Tips: Set PLA temperature to 220℃, even 230℃. Consider using PETG - it's better suited for flexible joints. Try 0.12 mm layer height Scarf joint is required to prevent flexible tab breakage Print on the side with supports to achieve…
I basically made this for pulling cables behind walls or above ceilings (original ethernet plug was from Dead End - Ethernet protector by SarahAlroe). You can stick a wire or piece of string through the loop and pull it through, hopefully…
Just a simple Quadlock puck with a loop for paracord. Fits super snug, very confidence inspiring. Great small item to rig up a simple hand tether or attach to your rock climbing harness. Source CAD:…
I saw someone else that made a remix of this one that had a better fit then the original but didn't want to share the STL's so I made my own one! Added some other improvements to like: No support needed Legs and bell pins are separate…
Some extra space on the side of your drawer? Customize and print these spacers so you can fit your baseplate perfectly. The design is parametric so you can specify the perfect width and length for your spacer. Customizing Download the…
This is a rivet for the strap on Crocs to replace broken ones. I print on an angle. The female part is flat to the buildplate (two parts touching) but the male part need rotating back slightly to reduce the support required. You can print…
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…
Since the i3 has no hooks in the boot, I made this to fit into the tethers on the rear seats.
