Counting matching models…
3D printable Deadpool cat, or should I say CatPool? Provided in STL format, and also a painted 3mf file too, if you have a multicolor ams system printer! Join our Patreon now to never miss the monthly SEREV3d giveaways: ▶…
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
This design is a combination of the front and rear bumper for the TBS SourceOne V3 integrated with my antenna mount design for the Happymodel ExpressLRS ep1 antenna. This design is also a remix of the TBS Source One Accessories but this…
An adapter for the 19mm wide AvatarPro camera to the 28mm wide frame of the TBS SourceOneV3. Printed in TPU for damping reasons. Uses 4-6 M2 hex-nuts.
Just a Apex-Style VTX SMA stubby mount for the pigtail. Added one version without the extra holes for the to screws but instead with a hole for a hex nut. Update(2022-03-14): Recognized that a 6mm hole for the version with just that hole…
The TBS Triumph Pro antenna is quite long so I thought it should be mountet inside the frame. It works good and it takes load off the connector by supporting the antenna at two points.
Hi guys, We all must give BIG THANKS TO Justin Fritz because he was the person who asked me and helped me a lot to make this model together. I don't have the latest revision of the K1 MAX, but with the help of his tape measure and a few…
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands! These models were entirely reworked for improved flexibility, fewer fasteners, and enhanced functionality. It is not compatible with previous revisions but offers a more…
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands. I reworked the CAD, allowed for more fasteners, and added new clamps. Every part changed some. You can find an up-to-date list of SuperMod designs here:…
I think it's time to slowly release more of our Halloween-themed designs! Let us present to you: Cute Creepy Candle Holder! This simple little flameless tealight candle holder can be printed without any supports. Get access to all our…
If you want ALL the versions, you can go grab them all for FREE on our patreon page: https://www.patreon.com/SEREV3d We reworked the inside structure completely: ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024…
And here we are, welcome the newest member to the little family of Halloween candle holders: Cute Pumpkin Candle Holder! This simple little flameless tealight candle holder can be printed without any supports. If you sign up on our…
Our Cute Creepy Candle Holder was a bit lonely all alone, so we decided to make a new friend for it! Another pretty addition to our fun household decorations for Halloween: Cute Medusa - Candle & Soap Holder! If you sign up on our Patreon…
By now we have a collection of amazing and cute candle holders! Let us present the latest one: ⭐ Cute Melted Candle Holder You can use this design and all the other FREE SEREV3d Collection to participate in the SEREV3d Halloween 3d print…
If you don't have your Halloween costume yet and if you are quick enough, you might even be able to print it before Halloween: ⭐ Wearable Jack Skellington Mask Or you can always wear a Santa outfit, and be a real life Jack Skellington for…
Arduino UNO rev3 - heavy bumper M3x6 screws Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20% Notes: 0.4 nozzle Category: Electronics
Hi guys, We all must give BIG THANKS TO Justin Fritz because he was the person who asked me and helped me a lot to make this model together. I don't have the latest revision of the K1 MAX, but with the help of his tape measure and a few…
When we recently saw this terrifying-looking Venom Frog in the trailer of the new Venom movie, we thought right away: this thing needs to come alive, so here it is! We also provided a printing, painting and post-processing instructions on…
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands! These models were entirely reworked for improved flexibility, fewer fasteners, and enhanced functionality. It is not compatible with previous revisions but offers a more…
One of our favorite characters from Arcane is Ekko, since season 1! We've been planning to put out some cosplay props from League of Legends and Arcane for a while, and since Season 2 just came out, I think it's the perfect time to do so…
We haven't done anything Harry Potter related yet, but this time we came up with a fun idea: what if we make the Sorting Hat into a Christmas hat?:) So here it is, here on Makerworld we provided the Tealight and Puck Light version of it…
This is the FREE single color version of the Skull Rose:) Join us on Patreon where you can download a lot of different Skull Rose versions, ring, pendant, hanger in STL and 2 fully painted multicolor 3mf formats too:…
This little Ice creature is patiently waiting for spring to come, so finally it could fully melt into water:) Get access to all our other amazing 3d printable designs on our SEREV3d Patreon : dozens of original, high quality premium stl…
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands. I reworked the CAD, allowed for more fasteners, and added new clamps. Every part changed some. You can find an up-to-date list of SuperMod designs here:…
Our collection of cute candle holders is slowly growing every month, this time we present you a Valentines themed candle ❤ We released the single color version as a FREE download for you on Printables. Check out all our other free Cute…
By popular demand, the Breakable Eggs are making a comeback! 🥚the Poop Emoji keychain comes printed inside the egg 🥚The egg might look simple at first sight, but you will need to break it to find the hidden Poop Emoji inside ! Super fun…
By popular demand, the Breakable Eggs are making a comeback! We put this surprise egg out for FREE only for THIS WEEK! 😊 🥚the rubber duck keychain comes printed inside the egg 🥚The egg might look simple at first sight, but you will need…
This is a very simple cup I made to teach myself modeling with OnShape and to help my brother out. He owns a KIA EV3 and he wanted to use the front cup holders to store some coins and other small items. As the holders are not fully…
To protect the original Key from Kia cars I designed that protection Cover. I printed of TPU 98A, I used supports, depends on the bridging capapility of your printer. To insert the key flip in the bottom end first. The key should fit to…
Small Digispark case. I needed the case so i quickly designed one and thought i could upload it here too. The screwhole in the back is for securing the board and mounting the case, M3 or M4 screw will fit, with printed standoff on the…
We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! If you’re curious about all our exclusive and premium models, you’ll find so much more…
We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! If you’re curious about all our exclusive and premium models, you’ll find so much more…
We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! If you’re curious about all our exclusive and premium models, you’ll find so much more…
Model was resized to fit a 56mm candle on top and hollowed inside to fit a 38mm tealightModel was resized to fit a 56mm candle on top and hollowed inside to fit a 38mm tealight. Printed on Anycubic Kobra Max 2 , PLA , 3 walls , bottom/top…
We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! This kitty hides under a seamless printable ghost drape, with only their little eyes…
The Beetlejuice Sandworm is ready to strike a fright into your Halloween lineup! We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! Want…
This is a custom-designed, 3D-printable Modular Storage Tray created specifically for the KIA EV3 electric vehicle. This insert fits perfectly and securely into the large, open storage compartment located within the center console between…
The fuzzy skin settings for my print is: Fuzzy skin thickness: 0.2 Fuzzy skin point distance: 0.2
Third iteration!! Now fully configurable with Onshape's configuration features. Need a small or tiny one to fit your irregular spring / screw choices? No problem. Items Required: 0.4" long pen spring 2 small-ish screws Step one: Click on…
Super simple print - 1mm thick boxes that fit nicely in the crate your EV3 set came in. Print 4 of the "corner boxes" and 2 of the "middle boxes" and you'll have a set that looks like the ones in the pictures. They are tall enough to hold…
I made some room dividers for the large compartment of a Kia EV3. Printed in Charcoal Black Polyterra PLA. I joined the two parts with super glue, and I have also uploaded the file to MakerWorld.
This is a replacement part for a Deltaco brand tablet stand. The stand has a sticker on it marked “REV3” and “IPD-174”. The part is a component of the hinge mechanism. The original plastic had crumbled after a decade or so. Sliced with…
No screws required, just slide it all together. Originally designed to be used as a RFLink case.
Helps to protect FPV goggle lenses. Designed to be compatible even when you use diopter lenses. Print instructions Best material is PETG, because it's has to be flexible a little bit. Fell free to trim-sand top "bumps" which fit into…
Another version of my design for an antenna mount for the TBS SourceOneV3 Frame. This one has extra protection for the antenna tips. Like shown in one of the pictures you have to add a little cut to more easily insert the anteanna tips.…
This project provides adapters for a Pixy2 Camera onto LEGO EV3 devices. It consists basically of a 5-hole beam with an angled surface and two holes. Pixy2 should be mounted with the original metal brackets and screws. Models for 15°,…
I want to use a True-D V4 receiver on my Sky04X, so I decided to try to fit it. The board of True-D needs to be a little sanded to fit perfectly inside the bay, but it fits. This cover uses the original bolts and fits from True-D v4.…
The Blue version of my Lego EV3 Color Sorter cup design. It includes the wavelength of blue on the front (450 - 490 nm). It also includes a ramp to allow the Lego pieces to slide to the front, one by one. It can fit with my 3 other models…
The Yellow version of my Lego EV3 Color Sorter cup design. It includes the wavelength of yellow on the front (About 510 nm). It also includes a ramp to allow the Lego pieces to slide to the front, one by one. It can fit with my 3 other…
The Red version of my Lego EV3 Color Sorter cup design. It includes the wavelength of Red on the front (620 - 750 nm). It also includes a ramp to allow the Lego pieces to slide to the front, one by one. It can fit with my 3 other models…
The Green version of my Lego EV3 Color Sorter cup design. It includes the wavelength of Green on the front (About 510 nm). It also includes a ramp to allow the Lego pieces to slide to the front, one by one. It can fit with my 3 other…
Zweiteilige Halterung zum Befestigen eines Walksnail Avatar VRX an einer Eachine EV300D FPV Brille. Da diese Brille keine Möglichkeit der schraubbaren Befestigung bietet muss die Grundplatte mit dem beiligenden doppelseitigen Klebeband an…
I really liked the design that @ StreelyDan created. Wanted to combine the bottom and middle section as one piece. Also modified how the design is all connected by threaded screw from the top of the design.
Lid I designed for throwing my Preonic Keyboard in my bag for work. Print Settings Notes: This is 240mm long. On my Ender 5, I had to print it on its spine at a 45 with the entire inside filled with support material. Category: Computer
redesign fan duct to direct air nearer to nozzle I printed using eSun Petg no support or brim needed, just lie flat on the fan mount side
EN-us This is a battery pack for Lego Mindstorms EV3. Allows the installation of standard lithium batteries of size 18650. The native module Lego-45501 also uses 2 lithium batteries, but its price bites. I used 8mm wide and 0.2mm thick…
use with M3 allen key cap screw and nut
Sometimes we have to purchase the whole set from a hardware store. Just make ourselves a single piece
A minimalist bench riser for an Arduino Uno Rev3. Simply intended to keep the Arduino up off the worksurface and thus minimize possibility of contact shorts or damage to the bottom of the board. Raised guide pins on the mount locate the…
Lego Education kit comes with the caster & steel ball '2000702' but not in commercial one. Those aren't available in many countries so here's the next best solution. This caster is for the marble/glass ball size 16.1mm (5/8 in is a bit…
Make your own DIY charging station for EV3 batteries. (LEGO 45544, 45501). This docking station can hold up to 5 batteries. Charging is provided via simple connectors and 12V DC power input. The actual charging circuit is within the…
The rubber parts on my old Deltaco REV3 IPD-174 tablet stand had started to become sticky as the plastic degraded. So I modelled some new parts and printed them in Overture TPU (95 A shore hardness). See also an older model I made for…
This clip holds fast the educational version of the EV3 Mindstorm case. In the past I had put masking tape on the boxes so that when they tip over on a bus trip, the contents do not spill out. The design is inspired from flummer's thing…
Disclaimer : Swapping the strain relief involves opening the charger, which is a mains-powered device. Such devices contain components like capacitors that can store high voltage even after being disconnected from power for long periods.…
Seems to fit tight. Needed to pry off with printer spatula. Not a problem though as it probably won't fall off on its own. Scaled up by 2500% which seemed about right. Thanks to Thingiverse user heardzm16
Simple 3d-printable plate for corne v3 (with 19mm spacing). References svg-files from https://github.com/foostan/crkbd/releases/tag/corne-cherry-v3.0.0 Since the original svg has randomness in the outside rounds, those have been replaced…
