134 models
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Case, designed for NX4832F035, but can fit for all similar models. Print parameters Supports: No supports necessary, place it facing down if you have enough cooling
Originally published here: Samsung Galaxy A02s & F02s & M02s case by tato_713 - Thingiverse This case was made for the phone A02s and M02s (a025 and m025 models); for the A02 or M02 case (a022 and m022 models) see this post . It is…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
osVAC Triton TRA001 / MOF001 Adapter
Originally designed for driving a Welsh Highland Railway/Ffestiniog Railway model train locomotive, but can be placed in any model loco. Re-scale if desired. More free STL figurines to download from https://tramfabriek.co.uk/figurines.html
This driven gear is replacing the stock qidibox spool gear. No longer rely on a pen spring for operation! This uses a HF0306 one-way bearing to function identically as the OEM gear but more reliable rewinding of the spool (and no more…
This is an adapter that makes sure that the bezelfree kit from Asus is secure on thin monitors like my AOC 27 WQHD screen. Without these adapters the kit is really loose. For me the top side only needed the adapter, so I printed 4.…
Model designed for 1:76 scale, but can be re-scaled to any scale. Comes with supports for resin printers. More models at https://tramfabriek.co.uk/figurines.html
Model figurine digitally sculpted and designed for 1:76 scale, but can be re-scaled to any scale. Comes with supports for resin printers. More models at https://tramfabriek.co.uk/figurines.html
This is a Festool cleantec adapter for the Triton JOF001 Router. Dies ist ein Festool cleantec Adapter für die Triton JOF001 Oberfräse. small donation for a coffee paypal.me/renesoukup Thanks Print Settings Printer Brand: Anycubic…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Female locomotive driver originally designed for 009 narrow gauge model railways in 1:76. Re-scale if desired. Used colours: AMMO: Warm skin tone, Vallejo: Oxford blue, Sky grey, Red, black grey, Pale sand More free STL figurines to…
Female locomotive driver originally designed for 009 narrow gauge model railways in 1:76. Re-scale if desired. Used colours: AMMO: Warm skin tone, Vallejo: Orange brown, Foundation white, , Prussian blue, Black grey.
I bought a secondhand Triton MOF001 plunge router. The base was missing and I could not find an online store in South Africa that supplied the base for the MOF001. (The base for the TRA001 was widely available, but is 180mm in diameter.)…
Hi, this is a mount for the sonic sensor (HY-SRF05) it's based on the datasheet here : https://www.robot-electronics.co.uk/htm/srf05tech.htm Just print it as it come. No support needed with unnamed PLA. Have fun building robot =) Print…
Alternate version of https://www.thingiverse.com/thing:7105717 I just changed the text to 'Super Light Duty' because I liked the idea form spiritkanaka. There's two versions of the STL. One that's scaled for the tailgate, and another to…
Slightly tighter fit for Cleantec adapter. 36.5 mm vs 37.5mm inside diameter.
This is a variation of the YF007-5 Cable Guide for bicycle frames that use bottom pull front derailleur. Printed with PETG. Looks and feels reliable, but real durability was not tested yet as I don't ride my bike in Winter. Recommended…
If you have a SureFeed MPF001 and it runs its motor but can't lift its lid, you may need this part. Or maybe https://www.printables.com/model/209284-surefeed-mpf001-lid-opener-repair-part Open it up and take a look. I replaced the short…
BF02 TankLock adapter for various Triumph, Aprilia, and MV Agusta motorcycles! Single print in place adapte that uses M5 cap screws to attach to the tank. Please note that you will need longer screws for your specific bike! (Please note…
This is a remix of Mr_3D BMW phone holder. The original is designed for a different phone holder. In addition, I wanted it to be modular. The ball joint is standard - 17 mm in diameter. It was designed for an F10, it was also tested in a…
Uses the Bumper Brace from the Original Model.
Alright, story time. Couple years ago i bought myself a Specna Arms Flex SA-F01 for airsoft. I was a total beginner and i wanted my own so i wouldnt have to keep using my local airsoft club's rentals. At the time, i didnt know how much…
The NH35 has a different stem height compared to the F06, so a dial side spacer is required to align them. This allows you to use even the tall variant of these movements as shown in the model photos.
Front gear cover for Tamiya TA01 TA02 DF01 Chassis Tested quite thoroughly in a Top force evo to ensure it fits properly flush with the front gear housing, bearings will sit into place and that there is no interference with the gears. The…
31K Pistol based on the iconic 10mm from Fallout 4 and 76. Buy 31K-M hardware with 9 bearings. Printed magazines are in the files or compatible with modified nightingale magazines or unmodified AIT 40 max lightingale magazines. Hardware…
Simple to print model made to attach a cheap webcam I had lying around to the Anycubic Kobra Max. It just fits tightly without need for glue or anything. ---------------- Uploaded a second model with a cheap 24v led made for sewing…
Systainer sys3 337 interior for Triton MOF001 router. Printed the bottom inlay in 4 quarters. Full size stl file also available. For the collet holder, the double variant is preferred, due to the twisting motion. Onshape document:…
Used for a Tamiya Dirt Trasher, based on DF-01 Chassis.
Fence upgrade for Triton MOF001 router (probably TRA001 as well). Features additional dust extraction, a variable fence opening and a knob for additional stability during routing. The additional fence parts are mounted on the pre-existing…
Designed to nestle into the crooks at the far left and right sides of the wings. Uses two Small-size command strips for wall mounting, one for each side. Prints in the provided orientation (flat wall-mount side facing down). Minimal…
If you lost the original one, you need a M5 bolt, preferably with a 10mm diameter head.
Mount for expansion board for BBC micro:bit IoT - ElecFreaks EF03426. Wi-fi module for BBC micro. Printing without support.
This design is for a metal dish holder for the Petlibro PLAF004 automatic pet feeder. It came with a plastic bowl which apparently can, over time, lead to "chin acne" (their newer models now have a metal insert). The bowl it's designed to…
A battery holder for the Heewing F01 or other similar wooden rc structures.
Inprove the fitment and appearance on Mastio 1/24 scale models with custom HRE FF01 wheels.
My cats are gremlins that like to push their plates from under the feeder and then lick bare spots in the rug once their food dispenses everywhere. I designed this insert so anyone can easily attach a custom dish holder securely to the…
Siemens is not offering any egg holders which are fitting in the door racks. So I created my own egg holder for the KI82LADF0 fridge.
Replacement, tighter tolerance gear selector bushing upgrade for common Suzuki cars. This was originally created for my 2004 Suzuki Ignis Sport however this should also fit alot of other Suzuki cars with similar gearbox designs such as…
jpgdesign3d.de 8,5Jx19 ET48 4F0 601 025 L 1H7 Einfacher 3D Scan einer BBS Speedline Felge. Nur die Vorderseite. Simple 3D Scan of BBS Speedline rim. Just the front of the rim.
Den Staubsammler nur einlegen. Er wird durch den Ring von der Kreg-Platte leicht geklemmt, sa das der Staubsammler gehalten wird. Die verlängerten Stützen sind oben verbreitert, so das jede Einlage der Kreg-Platte passt.
Included in the attachments is the parametric Fusion 360 design and the label design
Info The tolerances are quite tight, so it is as airtight as I could make it. I will add a version with looser tolerances so you can screw in accessories and filters easier later on. If you have feedback, let me know^^ Print instructions:…
These items are for making the F06/F10 steering wheel unlock and engage the SZL on E8x and E9x BMWs when swapping to the newer steering wheel. Print from a temperature-tolerant filament (e.g., ASA, ABS, PETG, PA6/PA12) and affix in place…
Support amortisseurs pour le Tamiya FF03 en montage vertical. Print Settings Printer: JGAurora A3s Rafts: No Supports: No Resolution: 0,2 Infill: 100 Category: R/C Vehicles
Front mounting bracket for the body. Used for a Tamiya Dirt Trasher, based on DF-01 Chassis. Holes are 2mm
Full instruction with list of individual parts for Seat Leon 5F 5F0071610/5F0071610A Aero Side Skirts Mounting Kit is not available to order separately without Side Skirts. Also Side Skirts are rarely available to order from the dealers.…
I designed this Gridfinity bin to organize my small woodworking shop. This 1x3 Gridfinity bin holds the Hongdui JF06 Kerfmaker. The bin has no stacking lip but holes for magnets on the bottom. Model was created using Fusion360 and the…
The case is a simple rectangular case that is designed to fit my XIDOL K5188 USB modem I bought from Tokopedia. The device seems to share the same dimension with UZ801 or other chinese USB modems. The “Zhihe-series LTE dongles” page from…
Pièce pour le guidage des cables moteur du FF04 EVO. Print Settings Printer: JGAurora A3s Rafts: No Supports: No Resolution: 0,2 Infill: 100 Category: R/C Vehicles
Hi, I designed a DJI o4 camera mount, based on the given dummy. The camera has to be slided into the mount, with the cable being on the upper side. Inside of the mount there are clips, gripping into the lens. My recommondation is to print…
For mounting the Brace on the chassis you have to use the two suplied M3*10mm countersunkscrews from the shock tower and two additonal M3*6mm countersunkscrews to mount the brace onto the shocktower.
By using this bracket, you assume all risks associated with using the Ferosticker near your equipment, facility, dwelling, enclosure, etc. I am not affiliated with Ferosticker in any way. Any risks associated with or resulting from…
Just a stand to match my Wowstick
these are branches for montana F02G, I printed it with PLA basic profile and it fit quite well. print in from the flat surface, as the left part is a mirror of the right it need to be flipped to be printed withour support
Just a remixed mount piece for the Creative Labs VF0415 webcam. No supports needed.
Buy using Violent blower link on Aliexpress
A first try at making a replacement part for the Acorn data recorder - ALF03.
Designed and printed a TPU Bumper for this mount. Designed it for my Trabandt body but it did also kind of fit my Datsun 510. Used 4 M3 18mm screwd for fixation.
Hi, As the title says: This is a Mount for the Speedybee F405 on the Heewing F01. You can use the original screws from Heewing, but will have to use longer M2 screws for the standoffs. M2x8 should be fine. Have a nice one.
Missing piece for Audi 5 spoke center cap - part number 4F0 601 165 N I was missing one of these parts on my wheel center caps, so I quickly reverse engineered it. I printed mine in SLA Durable Resin, painted with some random silver spray…
These Petlibro bowl bowl replacements allow you to dump the food out onto a feeding mat. They work with the PLAF003 model. Check out the PETLIBRO PLAF003 Stand as well. NOTE : The FDM process does leave areas in the print where bacteria…
Simple adapter ring to mount glass from B+W 49mm XS-Pro slim UV filter under the front nameplate of Voigtlander 35mm F0.9 Nokton lens in Fuji X mount Steps: Soften factory glue by dropping few drops of acetone into front filter thread…
A neck piece designed to fit the alternative head provided with the Tactics Waistcoat TW-F09 Freedom Leader figurine. While it grips onto the body more than well enough, the design of the platform on which the head sits prevents making a…
This is a remix of the camera mount for the Creative 73VF076000000 Live! Cam Connect webcam.
No supports needed when you print the model with the opening facing up. Do keep in mind that the MF01 can run pretty hot when running it with a diffuser.
Want to make your old or extra Tamiya M03 into a Tamiya FF02? This is the way, use these parts with Tamiya TL01 suspension arms to do it. Copied part from a original Tamiya FF02, center section is made so it provide good place to put ESC…
A panel to replace the empty side panel on the left of these CRTs in order to have custom AV inputs.
In an effort to improve the signal quality to my Soliom BF08, I designed this bracket to relocate the antenna to the side of the feeder. The result is a huge increase in signal, since there’s no longer a sizable metal box interfering…
Inlet-Cap for the Shigematsu STS-CF01 Mask Inspired by Jan Asleep's model “NATO 40mm Gas Mask Inlet Carb” ( https://www.printables.com/model/1180064-nato-40mm-gas-mask-inlet-carb) These caps are specifically designed for the bayonet mount…
Bracket to attach a single, or 2 of the tools to the lower part of the wand on the VACTechPro F02 Ultra. Will require 4x M3 screws and ideally heat set thread inserts. (the hole has a 3mm section that will accept a screw but it will be…
Requires a single screw with max 5 mm thread outer diameter and a 10 mm wide, 5 mm tall head. There's a cylinder around the screw hole in the STEP file to be used as a 100% infill modifier.
This is the model of a replacement button for the handle lock of the stroller Feder F01 . A replacement part is not available in stores or from the manufacturer, so I simply recreated it myself. I made 2 versions, one with a slightly…
Hi, Maybe you can use it for your modeling or just because you lost the original one: this is a model of the camera dummy from the Heewing F01. Fits perfectly.
Hi, I edited the given cap and made a good printable version. youll have to insert the antenna protector first and insert the o4. I cut a bit of the elapor to have the usb-c port accessible. Also the camera needs a small cut, if youre…
This is a stand for the PETLIBRO PLAF003 pet feeder that lifts it up about 6 inches. This can be helpful if your pet has digestive issues and needs to be more upright when feeding, or if you are using a the PLAF003 food ramp to dump the…
Hi, Just combined these two models.
Подставка для кофемашины krups quattro force ea82f010. решает проблему капающего на стол молока
D&D Male Gnome Druid By Kimball Marston © 2025-07 Kimball Marston and Mars-TonFoundries Visit our Store for Bookmarks at: Mars-Ton Fables .com This is a Hueforge Filament Painting using only two colors. This makes it easy to print for…
Here we have a new disk drive cover to replace the crummy Chinon 'thin metal and tape' cover that resides inside of our Amiga 500 cases. This model is THIN on the PLA, and you are welcome to adjust the walls of this model as you see fit.…
A set of holder and hooks for the Triton MOF001 router. I mounted them to the door of my router table access so they are always close at hand. I printed it in PETG, 0.2 layer height, structural Gyroid infill. PLA would probably work fine.
Filter component step with colors for use in PCB lib RSLF07 240052B 90.05-0.03M
Adaptér na připojení 10Nm pohonu Belimo NF24A (a podobných) na kulový kohout s přírubou velikosti F03 ISO 5211 tisknuto z šedé a černé: PC/ABS Šedá (1,75 mm; 1 kg) | Tiskové struny | Filament PM Použitý kulový kohout: Ventil kulový…
A simple wall holder for Aneng BF01 with two screw holes
Inner diameter - 19.5 mm Width of walls on the inside - 1mm Diameter of hole for cables - 7.5mm Holes for M4
🇪🇸 Descripción (Español) Tapa de repuesto para la caja de final de carrera de motores de puerta de garaje Erreka (Modelo 65-T2250CF03 y similares). Este diseño sustituye la tapa original de plástico que protege el sistema de muelles y…
In an effort to improve the signal quality to my Soliom BF08, I designed this bracket to relocate the antenna to the side of the feeder. The result is a huge increase in signal, since there’s no longer a sizable metal box interfering…
Upgrade your XIKII INDUSTRY FF08 case with this custom-designed SSD tray replacement. Instead of the stock SSD tray.
Snap on webcam mount for the Elegoo Neptune 4 3d printers. No mounting hardware required. I remixed the original model to fit a Creative VF0770 Live! webcam, but it should fit most webcams with a base but no mounting hardware.…
This is a stand for the PETLIBRO PLAF003 pet feeder that lifts it up about 6 inches. This can be helpful if your pet has digestive issues and needs to be more upright when feeding, or if you are using a the PLAF003 food ramp to dump the…
If you have a SureFeed MPF001 and it runs its motor but can't lift its lid, you may need this part. Or maybe https://www.printables.com/model/209284-surefeed-mpf001-lid-opener-repair-part Open it up and take a look. I replaced the short…
Inlet-Cap for the Shigematsu STS-CF01 Mask Inspired by Jan Asleep's model “NATO 40mm Gas Mask Inlet Carb” ( https://www.printables.com/model/1180064-nato-40mm-gas-mask-inlet-carb) These caps are specifically designed for the bayonet mount…
By using this bracket, you assume all risks associated with using the Ferosticker near your equipment, facility, dwelling, enclosure, etc. I am not affiliated with Ferosticker in any way. Any risks associated with or resulting from…
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
Systainer sys3 337 interior for Triton MOF001 router. Printed the bottom inlay in 4 quarters. Full size stl file also available. For the collet holder, the double variant is preferred, due to the twisting motion. Onshape document:…
Accessoire en 2 pièces à fixer sur la makita afin d'avoir une meilleure prise en main de la visseuse en position verticale. Insérer 2 écrous M4 à l'intérieur de la bague Dévisser la vis qui assemble les 2 parties de la visseuse (au pivot)…
