1 / 3
Tapa Final de Carrera para Motor Erreka (65-T2250CF03) - Puertas de Garaje — image 1
1 / 3

Tapa Final de Carrera para Motor Erreka (65-T2250CF03) - Puertas de Garaje

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tapa de repuesto para final de carrera en motores Erreka 65-T2250CF03. Protege los interruptores de suciedad.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
25
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial — Share Alike

🇪🇸 Descripción (Español)

Tapa de repuesto para la caja de final de carrera de motores de puerta de garaje Erreka (Modelo 65-T2250CF03 y similares).

Este diseño sustituye la tapa original de plástico que protege el sistema de muelles y microinterruptores del final de carrera, evitando que entre suciedad, polvo o insectos que puedan provocar fallos en la apertura o cierre del portal basculante/batiente.

  • Compatibilidad: Probado y diseñado específicamente para motores Erreka con referencia 65-T2250CF03. Es muy probable que sirva para otros motores Erreka de la misma serie que compartan el mismo bloque de fin de carrera lateral.

  • Instalación: Ajuste directo idéntico al original, utilizando el propio tornillo central de fijación de la máquina.

Recomendaciones de impresión:

  • Material: PETG, ASA o ABS. Al estar en un garaje o exterior, el PETG o ASA soportarán mucho mejor los cambios de temperatura, la humedad y los golpes que el PLA estándar.

  • Relleno (Infill): 20% - 25% (Patrón Giroide o Cúbico).

  • Soportes: No son necesarios si se orienta la pieza con la cara exterior apoyada en la cama (se recomienda activar la opción de Ironing / Alisado en la última capa superior si quieres un acabado ultra liso en el frontal visible).

  • Perímetros (Paredes): 3 para asegurar una buena resistencia estructural alrededor del tornillo.

🇺🇸 Description (English)

Replacement limit switch box cover for Erreka garage door motors (Model 65-T2250CF03 and similar series).

This 3D-printed part replaces the fragile OEM plastic cover that protects the internal microswitches and spring mechanism of the limit switch system. It keeps dust, debris, and insects out, ensuring smooth and reliable operation of your overhead or swing garage gate.

  • Compatibility: Designed and fully tested for Erreka motors with part number 65-T2250CF03. It will likely fit other Erreka models that share the same side limit switch block housing.

  • Installation: Direct drop-in replacement. It mounts perfectly using the original central retaining screw.

Recommended Print Settings:

  • Material: PETG, ASA, or ABS. Since garage environments experience temperature swings and humidity, industrial filaments will offer much better longevity than standard PLA.

  • Infill: 20% - 25% (Gyroid or Cubic pattern).

  • Supports: None required if printed with the outer face flat against the build plate. (Enabling Ironing on the top layer is recommended for a sleek exterior finish).

  • Walls/Perimeters: 3 walls for optimal structural strength around the mounting screw hole.

Tags