Counting matching models…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
This Adapter is made for a vacuum hose with an inside diameter of 32mm, outside diameter 38mm to the male part of the osVac System. Every hose between 36-40 outside diameter should work, I use this vacuum hose from Amazon:…
Better than seeed original case. Didn't block and didn't reflect sound wave by case.
Watch the full video on the channel :
Integrated compliant latch ¼" threaded hole for tripod mounting "Printing: It is better to use PETG due to it's flexibility. I used 3 perimeters and Thick bridges option ON. Then you need to turn on supports because of the button that…
This is a remix of the original model plus the feet and legs from another one (that I can't currently find again, my apologies) so that the bottom simply slots into place with a twist. All edges are filleted and the overall assembly…
What if there was a way to tap straight into the core of a power station as versatile as the Anker F3800? To not only extend the runtime of the battery, but to merge with the battery itself - and gain direct access to the full potential…
M5 x 0.8mm nut needed. Adhesive should be used to mount.
You will need the “ FALCAM F38 Quick Release System ” to use my print appropriate. Also, you need 4x M4x10 countersunk screws.( For the Falcam F38) 2x 4mm x (min. 25mm) countersunk screws.( For the wall mount)
A compact, low-profile case (Ø 109 × 15 mm) for the Seeed Studio ReSpeaker XVF3800 USB 4-Mic Array with XIAO ESP32S3 . The body is printed in black and a separate white ring sits right above the 12 WS2812 LEDs, so the direction-of-arrival…
I've made an insert for the Falcam f38 plate & CSS hub mounted on the Smallrig Grip for an Nikon Zf camera. It fills the open space on the Smallrig grip so the mounting plates sits level against the camera. It also makes positioning…
🇩🇪 Deutsch reSpeaker XVF3800 Gehäuse mit integriertem Lautsprecher: Voice-Satellit für Home Assistant Ein kompaktes, rundes Gehäuse für das reSpeaker XMOS XVF3800 4-Mic Array mit XIAO ESP32S3 von Seeed Studio. Es ist um einen…
F38 Adapter for my Dust Commander DLX to connect my M38 Hose. Printed in PLA+ worked fine for me. It is a loose fit, so that you can seal it perfectly, with one or two layers of tape.
I created this because I often want to mount my gimbal on a tripod that has an f38 base. Also I often use the tripod of the gimbal on my camera that has a f38 plate. The issue is the f38 plate on the base of the DJI rs3 battery always…
This dovetail plate slides into a Ulanzi Falcam F38 quick release. One side is mounted on my video camera rig. The stock QR plate is on my offboard audio recorder. Sometimes I want to swap out that audio recorder for a wireless lav…
A spare switch/handle for the Kolver RAF38NS/FR screwdriver.
[UPDATES] Print Nozzle by rotating (absolute) Z=180 and Y=60 degrees When printing like this, there is no need to file or sand or carve anything. Just print and use. Updated xy compensation from -0.1 to 0 A nozzle for Xtool P2S that…
A low, round enclosure for the ReSpeaker XVF3800 4-mic array with its XIAO ESP32S3, used as a Home Assistant voice satellite. It is made to disappear: a small plant pot sits on the flat top, and the microphones listen through four slots…
What if there was a way to tap straight into the core of a power station as versatile as the Anker F3800? To not only extend the runtime of the battery, but to merge with the battery itself - and gain direct access to the full potential…
Integrated compliant latch ¼" threaded hole for tripod mounting "Printing: It is better to use PETG due to it's flexibility. I used 3 perimeters and Thick bridges option ON. Then you need to turn on supports because of the button that…
