Counting matching models…
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
After remixing a Fleetmaster truck I wanted to create a flat-front truck and found the F700 as a suitable subject. It's designed with OpenSCAD and the parts are printed separately to allow for colour selection. I used super glue to put it…
Proxxon MF70 CNC kit The Proxxon MF70 milling aluminum: https://www.youtube.com/watch?v=0W1iQ1PUNVY Following improvements/changes have been made compared to the design of ttsalo: full x-axis table range is now available. Using the ttsalo…
This upgraded angle plate for the Festool Domino DF500 or DF 700 provides a better stability and rigidity than the factory version. The file JOINT can be printed in TPU to hold the 2 M5 screws. Category: Parts
All parts are designed for M5 screws.
This fits on the headlamp body of F700GS and F800GS. If you installed aftermarket LED bulbs that has a heatsink in the back these caps extend to allow room for them. High beam and Low beam caps are different. The fit on the High beam is…
Chin mount for HJC F70 helmet and gopro fixation
Battery cover for Beurer BF700 (maybe fit in other scales too) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: PLA Category: Replacement Parts
Little assistants to help align stuff on the PROXXON MF70 micro mill (and presumably the standalone X-Y table by the same manufacturer). The slot is 6mm and the hole 6mm. UPDATE 29.3.2015: I made one out of aluminium. I used a 3mm end…
DF700 Real bit length 90mm Domino bar space 77.25mm Domino bar thickness 22mm diameter Notes: DF700 Real bit length 90mm 4mm bit length 79.25mm (10.65mm shorter than the rest) Base shim to zero depth 62.00mm For 1/2" plunge, bit needs to…
You can use the Endstop Limit Switch Bayonet if you are using Makerbot style endstop PCBs. I am using the BigTreeTech & Rat Rig Rodent CNC Controller running FluidNC. You can find the config for FluidNC in the rodent.txt, make sure to…
Replacement impeller for Toro PowerJet F700 Blower. Several different models which are very similar exist. Make sure that this part fits your SN. I printed in PETG for durability.
A minimal footprint gridfinity bin (4x2) that can hold the MF60 or MF70 WolfBox Air Duster. I wanted a model where the duster could hold any attachment, and all attachments are accessible. Not recommended for a shallow drawer. The modal…
Used PLA but PETG might be better choice. 0.3 - 0.4 mm layers / 4 perimeters /15% gyroid in-fill /supports required (recommend organic supports)
The part is marked as WIP since I need to fix the face plate on the back. You can already use the parts if you install the original Proxxon plate on the back of the lower axis. The original files for the lower axis are off center on my…
Hello everybody, this is my latest project: a CNC conversion of the Proxxon MF70 milling machine. The mill was upgraded using a combination of Ender 3 components and a few additional parts. For control, I’m using the original 3D printer…
A compact, 3D-printable case designed to snugly fit the nRF7002 devkit.
This is a copy of the end mill holder that came with my Proxxon MF70 micro mill. My clone is slightly shorter and holds four end mills instead of the original three. Max dimension of the end mills 3,2x38mm It retains the snap open, snap…
Another glue spreader for the festool Domino DF700. I Made it to suit to our gue bottles. Using this glue spreader only makes sense if you do bigger glue ups… for one or two domninos, the cleaning afford is to much…. With a thread suiting…
A knob to reduce the swaying while rotating the X-axis knob of MF70, with a cake-like shape to offer different choices between accuracy and speed. An M3 x 25 hex screw and a corresponding square nut are required. Print Settings Printer…
When using the MS4 vice holder published by Easyrider112, I found it was hard to mount it. The set-wheel of the vice is right on top of the mounting screw. You have to take the vice of the adapter to mount it and take it off the MF70. The…
OEM knob fell off and got lost. Use hot glue if press fit isn't enough.
Larger crank for proxxon MF70, remove the original handle and screw it onto the printed part, then slip the printed part onto the original one and secure it with a screw.
This tool box holds three of my end mill tool boxes found at the link below https://www.thingiverse.com/thing:4386563 and a set of 6 collets for the Proxxon MF70 micro mill. Printed at 0,15mm layer height using PLA. Use support below the…
A dial indicator holder for Proxxon MF70 that screws onto the spindle shaft and uses a Noga FA1410 holder (part of Noga PH2040) to mount the indicator It shouldn't be too complex to manufacture the compliant dial holder part itself…
Tool used to manually adjust the preload suspension on a 2015 BMW f700gs motorcycle. Print on its side (see pictures) using either PETG or PolyCarbonate (PC). 100% infilled and 5 shell layers. Will include BAMBU Studios config file.
Wenn man mit dieser Halterung eine Minimot an eine MF70 anflansscht, kann man in der Vertikalen schneiden, statt in der Horizontalen. Das kann kompliziertes Einspannen ersparen. Festziehen der Minimot selbst und Befestigung an der MF70…
On the DF700 Flux the rear 120mm fan air intake is blocked by the psu. This design allows an intake of airflow to the fan from the rear of the case through the pci slot covers. Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes…
https://www.thingiverse.com/thing:4375769 kit is rather interesting but the Y-bridge is designed for the larger table from pantograph so if you are using original table the Y is too short and the bridge will hit your base. This is just a…
This is a large electronic box for Proxon MF70 milling machine. It has space for: GBRL Driver Board 24V Meanwell power supply (230V AC to 24V DC) 230V power switch enable buttons cable clamp for fixing cables Large cooling fan Part list:…
Was fitting Projunk's Proxxon MF70 CNC conversion kit, but couldn't find a suitable flex for the couplers and/or coudn't get the alignment of the couplers right. Used the original coupler as a model for creating a split version which…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.15 Infill : 20% Filament Material : PLA
I printed this in Colorfabb allPHA black with a 0.4mm nozzle & 2 wall loops
Haf700_Evo_PSU_Bracket Bracket for PSU Cooler Master HAF 700 Evo Case
My Jura Impressa F70 suffers from ghost touches on the capacitive buttons caused by rising coffee steam. This part easily attaches to the front using double-sided tape and fixes the issue completely. Prints in standard orientation without…
I printed this in Colorfabb allPHA black with a 0.4mm nozzle & 2 wall loops
Used PLA but PETG might be better choice. 0.3 - 0.4 mm layers / 4 perimeters /15% gyroid in-fill /supports required (recommend organic supports)
Upgrade your BMW 1 Series F70 (2024-...) with a sleek, custom-fitted wireless charging pad. This 3D-printed insert fits perfectly into the center console storage area, providing a clean, factory-like look while keeping your phone juiced…
