Counting matching models…
BMW F80 M3 Wall Art Easy to print Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and easy to remove. If you like to see more car…
ls2 ff800 storm gopro camera chin mount
This product is a 3D printable replacement latch for the Nikon F80 camera's back door. It offers a durable and precise s
Edit 01/2020 : Added a different version designed to be protected by epoxy resin. See the make for a preview. This is a round badge for replace the one one the side body of a BMW F800R 2010. This represent the coat of arms of germany.…
Replacement for FIAMMA No. 98673S204 + 98673A205 Settings: - PETG - 70% infill, Gyroid
Attached is my interpretation of how the signal switch replacement. I lost mine over the night in January 2022. Determined, I designed out in maybe 3 hours with 4 iterations. I have been riding with this for over half a year, still not…
Kaychain for F800GS riders.
AI produced 3D model of Ferrari F80 Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)
This is a single dosing hopper designed specifically for the 804 series of grinders from Ditting. It can be used as is, or with the bellows from the DF64 grinder, available from multiple online retailers. The hopper is fixed to the…
Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.
Bmw F800GS F900GS - KeyChain - Portachiavi - Porte Clès - 钥匙链 - llavero - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…
These are caps for the 2008-2012 (pre-facelift) BMW F800GS, with enough room to fit LED headlamp bulbs with built-in heat sinks. I designed these because the other model floating around totally didn't fit my (2009 model year) bike, the…
You need to change the oil of your F800GS, but you dont have a funnel? Your funnel keeps and falling from the bike, and you are making a mess? This adapter solves both issues, on one side you cant attach it to a bottle of coke and on the…
The original piece broke and I could not find a replacement part without buying an entire vacuum head assembly. Depending on your print settings, the fit may be a little tighter than the original part and might require a little force to…
A gridfinity 2x2 holder for a 100ml RF800 flux bottle. Unfortunately the bottle exceeds the Gridfinity grid size by just 3mm in one dimension, so I had to use a 2x1 box. You get a pretty useless bin in return.
Got annoyed my flux bottle kept tipping over because of the top heavy design of the bottle. Inside is slightly (1 degree) tapered for a friction fit. Print however you like. I used PLA with 15% infill and 20mm layer thickness. Category:…
BMW F800GS keychain for GS riders.
Gridfinity Bin Holder for Snapon 3/8" Ratchet. I had to cut it for my prusa mini bed. 1/2 coming soon!
Source code is here https://github.com/gshimansky/scad-models/blob/master/treadmill-cupholder/cupholder.scad You need to install Round-Anything OpenSCAD library to render it. Printed using Duramic PLA+ 0.6 nozzle.
da mir beim Löten die Flasche des öfteren umgefallen ist habe ich diesen Flaschenhalter entworfen.
I created these so I could place a board across and use my treadmill as a standing desk. The model is just the left side, I import it into bambu slicer, clone it, and then mirror the cloned one on the x axis to get the right hand side. No…
Simple upgrade to larger props for the US65 drone, should fit other FC's too though. Spans 87mm, and fits 52mm props. Tried to implement little motor guards :) Hardware: 4 x m2x12 Rubber bands for holding the battery I used this canopy by…
A modern motorcycle ABS works by comparing mainly 2 sensors : Front and Rear wheel speed (called ABS sensors, but used for ABS, speedometer and providing speed to the ECU for others uses). Add this to the front and the front sensor will…
THIS IS UNTESTED I tried to mimic the oem BMW GPS mount in dimensions. The only difference is that you can't remove it as fast / steal it from the bike once fitted. It's usefull for a GPS, or a phone mount and this use the AMPS holes…
Owned my WAECO Fridge for 10 years, the hinges still cost as much as a small Fridge. Dont spend $60-$100 for a set of hinges every few years. Make from ASA or ABS & they'll last just as long but for $2 or less. Printed on P1S - %25…
With clip ons on a f800r 1st gen, you can expect blocking your thumb while turning. This model is here to decrease the turning radius by blocking the fork so you can't turn at the maximum. I suggest TPU or Flexfill 92. You will nead to…
Custom-made adapter for the BMW F800S (clip-on handlebars) to easily mount your phone holder. Designed to fit into the fork bridge cutouts. The Adapter consists of 2 main Parts and 3 Standard Parts for 1 side: 1x Upper Part 1x Lower Part…
This funnel adapter is made for clean and easy refilling of the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L). It reduces spills, speeds up refills, and improves handling at the workbench. Key feature: fits the 1 L cap…
FPV Race Motor “T-Motor F80” LED light. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing is glued…
Fit a GPS, navigation, Map, Phone, token or picture of loved ones ? Tested to 160 km/h with the chigee aio-5 Only road tested for now. 800 km without any issues. Printed in ASA Geroid structure, with support structures. 20% infill…
Adapter for sawdust extraction for flat dowel milling machine ProStar DF8000K.
Replacement retaining collar / nut for the upper connector of the GF Garden double outlet tap connector. This is not an official GF Garden part. It was recreated parametrically from measurements and photos after the original white…
FPV Race Motor “T-Motor F80” LED light. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing is glued…
This funnel adapter is made for clean and easy refilling of the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L). It reduces spills, speeds up refills, and improves handling at the workbench. Key feature: fits the 1 L cap…
AI produced 3D model of Ferrari F80 Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)
Imade this to keep the transmision from getting dirt while cleaning or storing. Needs to be printed out of Tpu
This is a cover to replace the blinker lens of a BMW F800s motorcycle. It's not an exact replica, but it does the job! I made this because my lens broke off and I needed a replacement. I recommend printing in transparent PETG for heat…
Car keychain. Designed with a hole through which a metal ball must be inserted. I made it using fluorescent pla material
Mount your F800ST panniers to a wall to save space. You'll need a 12-14mm rod to use as the base support. For each pannier, you need to print the base side mount twice and the peg once. If you're mounting them side by side, you can use…
Cover for the rear fender of the F800GS I lost my rubber cover, and made this one to prevent mud under the seat Any questions, just ask me! :) Enjoy Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
Stand rest BMW for F800GS 2015 Print instructions I made it on 15 quick print with 50-60% and PLA.
Holder for switch LB-LINK BL-SF801 Holder for attaching to a wall, table, etc. Printing: nozzle 0.4 layer 0.2 fill 15% perimeters 5 (for strengthening the handles) If you like the model, rate me.
The u-hole in my air filter cover broke, and it wasn't holding the screw anymore. This part fixed the issue for me. Simply put it into the u-hole and insert the screw.
Brake Pedal Extender for the BMW F800GS 15 mm wider Dual control 10 and 15 mm I recommend at least ASA, PCTG, or PETG filament.
Every once in a while, the 3D printer saves the day. The XF80mm macro lens is one of my favorite lenses for the Fuji APS-C cameras, but mine was sadly crippled one day when the stock lens hood fell off, rolled into the street, and was…
The control knob of my old but still trusty laundry machine broke. So of course I made a replacement. Printed with PETG. Included some optional support models for soluble printing. Needs two M3 screws and nuts for assembly.
If you happen to have an BMW F800GS, as I do, and you lose the nut for your center stand, BMW charges you about 64€ for the replacement. Well, not in my house. When I lost mine, I replaced it with one made of ABS and over a year later,…
If you have a BMW F800GS and regularly ride with boots for off-road riding, you might not reach the brake pedal properly. This is a good solution: printed with TPU, it fits seamlessly. I've had it for about 2 years now, and it does its…
AMPS Ram mount for BMW F800GS adventure. To mount your gps or any device that can be attached to an AMPS mount. Works on the 16mm F800GS adventure windshield bracket (or in any other 16mm Bar).
I've created a simple Gridfinity Holder for my Flux in a 1x2 format for two flux bottles
Heavy duty fine particles + gas filter; HEPA filter combo and Activated carbon cartridge (250g). The input and output flows are oriented towards the upper part of the chamber, allowing the printing area to be protected from turbulence.…
