48,524 models
A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. On May 14 2020, this RC3 version received the CE certification and it complies with…
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed
Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
1h 20min per pcs Stacking versions of Prusa Protective Face Shield - RC3 A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. Provided…
I used this Golden Spray Paint for the perfect golden finish The Original FIFA WorldCup Trophy and a modified version for the WorldCup 2022 in Qatar!
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5 inches) American triple hole punch (distance 4 1/4", hole radius 1/4")…
These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…
This model was featured on The 3D Printing Nerd Be sure and Check out this awesome video by 3D Chill with super clear assembly instructions ! We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 Inspired by benzz88's…
I'm really glad to present you the Glorious Baby Dragon For these Models I've used High Gloss PLA ColorMorph Filament made by Formfutura . That was the first time I used this Filament and the results are marvelous, I love it! Use the Code…
“This is the way” The Mandalorian, also referred to simply as Mando, is a fictional character in the Star Wars franchise and title character of the Disney+ series The Mandalorian. Orphaned as a young child, Din Djarin was adopted into the…
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
Due to the large scale attached to the links, this chainmail is slightly less flexible than optimal. Still veeery satisfying to play with. Printed in PLA. Slowed the printer down a bit. Make sure you take build plate adhesion precautions.…
This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
When building my Voron I was looking for a nice bed fan solution 🤔 that would fit my Nevermore and help to bring the chamber temperature Even More up🔥 to where it belongs. Since I couldn't find anything that I really liked, I decided to…
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Finally, here you see the new Little Grass Drake Articulated, Print in Place, Printable without Supports needed. I printed this model with 100% / 70% / 50% size and it worked fine. I also created a File with separated Eyes. So have fun…
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
These coasters are very flexible. They are made using my version of 3D printed “fabric” and it's also the first time I publish the “fabric” itself. If you dare, you can split the pieces in slicer and form a new ornament ;). There are 3…
This is a remix of the awesome looking OctoGlasses from Ramalama2 which fixes some issues in the original design. Design There are the following changes: The terminal cover on the left side of the board is now fully accessible The fans…
When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a…
Fancy Skull says relax, kick back and let your printer do the work! He also recommends a 10%+ infill and supports (for the cheakbones mostly).
3D Printable Party Glasses Key Features: Shutter-Style Lenses: The horizontal slits allow for partial visibility while maintaining the bold design. Easy to Print: No supports, just 20g of filament needed, printed in less than an hour.…
Magic Payment Wand – Pay with a Little Magic Attention please: This is a remix of DesertCruiser's model available at: https://makerworld.com/models/2282000 Turn an everyday gesture into a moment of enchantment. This 3D-printed magic wand…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
This is a cool fan that you can expand with just the flick of your wrist! It is the perfect light weight addition to any backpack or bag to ensure you keep cool during the hot summer ahead! Note: This fan is designed to have lowish…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
This is a further remix for noinfill. I printed it with 2walls only. Here you go the timelapse. Don't forget to subscribe my YouTube channel.
🏆 The FIFA World Cup Trophy! Who doesn't want to hold the biggest trophy on the planet? ⚠ Exclusive Content: Please do not re-upload this model to other platforms. This project is intended to be downloaded only through my official…
I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…
Use stock 4010 fan and bolts. Both the fan shroud and the air duct can be printed in PLA. Two versions available, with honeycomb or horizontal grill intake. Print settings: Nozzle diameter: 0.4 mm Layer height: 0.1-0.2 mm Infill density:…
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Print your cool looking 3D printed fabric/chainmail. A great fidget for testing the limits of your printer! Features Dual color profile provided Fully articulated and print in place Recommended print settings (or just use the provided…
PRUSA PRO Face shield is the final version of our face shield (successor to the Prusa Face Shield RC3). The main difference from the RC3 version is the larger visor and 2 pins on the side for a better fixation. Face shield is used as…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
____________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
I had this design in mind, so I decided to make it. It is an octagon-based 3D printed flexible fabric. I am not sure what is the practical use, it might even be completely useless, but I think it looks cool. It could maybe work as a small…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
This little rake prints with a tiny brim on the end you should cut (not peel) off. Decongest your fan! This rake doesn't clean ALL the debris from your fan. Please be aware this is only a rake and your fan still requires periodic…
Update 03.07.2025 I made another iteration of the rotor which you can find in the filesection and I will also update the assembly and printplate with that one. Added the note to print the shaft in 100% infill after the recomendation of…
A physical version of the “good fast cheap” Venn diagram This is a redesigned mechanism for K2 Tech Designs' Good Fast Cheap slider. This addition uses a whippletree/rocker bogie mechanism to let you toggle any two switches, but not all…
Here you will find the most famous logos in the world! 116 logos for now! I regularly add new ones. If you want one in particular you can tell me in comment. I will do my best to help you! I will add the most famous brands only :) I also…
WORK IN PROGRESS , this is an initial design of the cover. Currently being tested and optimized. Join us, adjust the design and upload your customized cover as a remix. An elastic cover designed to close the gap in the headband, while…
Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…
Inspired by https://www.jpl.nasa.gov/news/news.php?feature=6816 https://www.thingiverse.com/thing:2437081
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
🇪🇸 Benvinguts a Barcelona! Welcome to Barcelona! One of MiniWorld3D's most popular models is now on Printables! Our Sagrada Familia model has been printed by makers all around the world for more than 5 years. This model comes in two…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
Elemental Guardian Beast Series Channel the fury of the storm with Zephyron , the Primordial Beast of Lightning — a fierce wolf sculpted with sharp, thunder-charged geometry. This bust commands attention with its bold silhouette and…
You need TPU to print this beautiful one piece musical instrument. Empirically tested to be a very good way to annoy your partner! How to print: Print the holey side on the print bed. I recommend printing it with 100% infill or enough top…
I didn't find a small death star lamp. So I decided to remix one. Fits nicely into the Ikea Fado 17cm lamp. https://www.ikea.com/de/de/p/fado-tischleuchte-weiss-40455437/ (german link) Have fun printing. It looks super nice! Printed it…
Here's a chubby little hamster no-support model. A great printer guardian, but watch out for your snacks. Print size at 100% is 60mm/2.4 in. Can be scaled down to 50% *Hamsters pictured are painted with acrylic paints Printed on Ender 3v2…
TriFlex The extremely flexible 3D printable fabric! Most fabrics have limited drapability so I really wanted to create a fabric that was truly fabric like, and I think I succeeded. This includes the following characteristics: Triangle…
PRESUPPORTED - https://social.thangs.com/m/57128 Hatsune Miku (初音ミク), codenamed CV01, was the first Japanese VOCALOID to be both developed and distributed by Crypton Future Media, Inc.. She was initially released in August 2007 for the…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
There are two versions of the facehugger. One simplistic design that fits more the flexi-family and one more realistic design.
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Bring a bit of winter “street style” to your desk with this white puffer-jacket (Montclair-style) pen holder . The padded sleeves, front seam details, and chunky “pockets” make it a fun, modern desk accessory that still looks clean and…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
This is a very simple, very fast to print bearing made of three interlocking rings which print in place. You can use it as a drop-in replacement for ordinary skateboard bearings, but because it relies on sliding rather than rolling…
Celebrate the essence of Christmas with this beautifully stylized Holy Family sculpture. Featuring smooth, flowing shapes and a modern artistic design, it captures Mary, Joseph, and baby Jesus in a serene, graceful embrace beneath the…
There are so many design decisions I really like about the 🥰 CORE One. But when it comes to the exhaust fan grid, it's just on the edge to call it " functional" 😟. So I felt I needed to design a drop-in replacement to fix the things I did…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Millennium Falcon Scale 1:500
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…
Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in 1/12th of the time a Ender 3 would need. By the time releasing, The 100…
🇦🇪 مرحبا بكم في دبي Welcome to Dubai! The Burj Khalifa (برج خليفة, Arabic for "Khalifa Tower" ) is a skyscraper in Dubai, United Arab Emirates (UAE) . With a total height of 829.8 m (2,722 ft) and a roof height (excluding antenna, but…
Our Father WHO are in heaven Cross 0.3mm layer high ,100% infill, 0.3/0.3/0.3mm walls
I recommend printing it a bit bigger so it doesn't fuse together
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
Stacked version of the Prusa Face Shield - US version (RC3 version) A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5…
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
EN: Prevents fogging of glasses and suction of unfiltered air around the nose. Different sizes. CZ: Zabraňuje zamlžování brýlí a přisávaní nefiltrovaného vzduchu okolo nosu EN:Instructions for comfortable and SAFE wearing Face Mask…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…
A fan grill for a 120mm PC fan. Designed in Fusion 360.
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…
Spring Gun V2 - Shoots fake bullets with magazine Spring gun v2 can fire multiple bullets one at a time thanks to the new magazine system. Reading the comments and advice from users, I designed version 2 of the spring gun. The new version…
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
Another house in the shape of a Christmas tree was missing for our Christmas village. It is perfect for an LED tea light so that the windows are illuminated in the dark for a great atmosphere. The whole model is available in individual…
The Boomerang V5 – Light and Fast Returning is the latest refinement in an ongoing boomerang design series, tuned for maximum distance and a quick, reliable return. Weighing in at under 10 grams , this three-bladed boomerang achieves an…
This is a challenge I gave myself. The goal was to design from scratch a replcia of The Deliverer from Fallout 4. The replica ressembles a Walther PPK with some minor difference. I tried to stay faithful to its shape while integrating…
