Counting matching models…
Spring Gun V2 - Shoots fake bullets with magazine Spring gun v2 can fire multiple bullets one at a time thanks to the new magazine system. Reading the comments and advice from users, I designed version 2 of the spring gun. The new version…
Spring Gun - Shoots fake bullets and poop Single-piece printed spring gun that shoots fake bullets and poop, fast, easy to print and a lot of fun to use. I had to make several attempts to find the right ratio of spring length to spring…
I challenged myself to create fake AirPods and a matching case to bamboozle my friends. I'm sure it will get a good laugh! Remixed original AirPod 3D design on Thingiverse and then created a case from scratch. I recommend using supports…
just a little fly to scare people. scale it to the size you need
Please click if you appreciate my work :) Fake dice always shows 6 Set the fill to 99-100% To always get 6 you have to develop a throwing technique. TIP: take a small nail in pliers, heat it up and insert it into 1 all the way. When it…
Are you a joke lover? Welcome to the right place. But maybe you are exaggerating with this... However, this is the best way to give your wife / girlfriend a heart attack. If you print that the right way, i'm sure they're gonna hate you.…
A rigged Dice V3.0. Fully new Version with Sphere as Base Model, like a real Dice. 4 different versions: one without weight on a specific side (Rigged Dice V3.0 - hollow) one with a weight → so 6 gets rigged (Rigged Cube V3.0 - rigged)…
This is a fake phone i made for the ‘’back to school'' The idea is that you use it to put it in the phone box in school, so you still have your real phone :)
This is a perfect place to hide a house or even a business key. I got tired of locking myself out of the house so I invented this. It looks just like an LB conduit body that everyone is used to seeing attached to the side of a house about…
Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
15% infill 0.20mm Supports on for plants and geo pot
I designed this case to neatly and securely house a Faketec V4 board , including: Dedicated slot for 18650 battery ( Aliexpress.com ) Space for GPS ATGM336H module ( Aliexpress.com ) Pass-through hole for SMA connector ( Aliexpress.com )…
It's a parody of flowers, bud in the form of a valve handle. Don't forget to give me a like 🧡 Share photos of your prints 🌹🌻🌼 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬 Here 👇 you can support me.
Easy and fast to print. Just remove the rear glas element of the Helios 44-2 and place the apaturein it. You also can add some fishing line to it and color it blue for cinematic lensflares. Print Settings Rafts: No Supports: No…
Fake iPhone 11 chassis designed for props, display, or accessory testing. This model matches the real device’s external size and feel without any internal components. The official iPhone 11 dimensions : — 150.9 × 75.7 × 8.3 mm — and the…
Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…
Fake wooden log for pets. Give your pet something to hide in and crawl around on, in, and through. Scale to fit your pet and printer. The example shown in the photos was printed using a wood-filled PLA. Print Settings Printer Brand: Prusa…
I got a lot of birds coming to my balcony so i printed a fake raven to make them run away There's a hole to tie the fake raven with a string No support needed I printed mine with PETG so it can hold the heat of the summer
Print in place. No supports required. I recommend PLA and 0.2 layer height. For the magnet version: Use 5x1mm with the thin cover, 6x3mm with the thick cover. Remix of my dice book: Dice Book
Foldable Spring Gun Shoots fake bullets and is foldable for easy transportation. Instructions after printing: take the gun from the sides and break the mini supports inside the joint so it can be released.
Honestly, I was just messing around and made the case for these. It is exactly what the name says. NOTE: Make sure you have "Print thin walls" turned on in your slicer settings or a couple of spots on the lid of the case will not print…
I thought you might all enjoy this mini security camera prop I created. It's a fun little reminder that in todays society “someone is always watching”. The model was inspired by 3Dfiti (https://www.instagram.com/3dfiti/). I designed this…
This is a remix to add the NASA worm logo and red border. https://www.thingiverse.com/thing:4899886
Have you ever needed a fake phone? Maybe you are running a play or skit, and you need it as a prop, or you want to pull a prank on someone. Well, look no further! This prop is based on the Samsung Galaxy A14 5G, meaning it has the same…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This is a fake AC outlet and cover plate (USA style), which might be useful for theater stage designs. Or covering holes in walls. Or for messing with people's heads -- attach with double-sided tape onto phone poles or trees or rocks. On…
Please use responsibly (don't do illegal things)! No supports Happy printing!
imagine a situation where somebody cut himself and he ask you to fetch the FirstAid kit in a backpack. WHERE? most backpacks have 5pockets+ and hiding places. you cannot afford to waste time in an emergency situation! here is the…
Remix of the excellent case by @AlleyCat for the faketec. Designed for v4 board, but it might work for others as well. The nRF module must be soldered directly to the board without headers. 2000 mAh 103450 LiPo battery.
Fake cigarette props for costumes and cosplays. Based on the original dimension of a regular (74mm) and a long (84mm) cigarette. AMS needed but your can cut my model and glue it if you want.
This is a cute Fake Bubble Candle for decoration
3D Fake Hornet Nest (print in BambuLab X1C) Pour faire croire au guêpes, abeilles, frelons voir frelons asiatique qu'un nid est déjà là. Vaporiser du jus de citron en plus les fera fuirent. Imprimé en PLA Wood (or other brown Pla) Hauteur…
These dummy shifters are modeled after the shimano grx shifters. They are basically fake hoods and thus the only benefit is to give you the same comfort as regular dropbar shifters. Main purpose is the fixie and indoor trainer bikes with…
Check out my Amazon Page to see what kind of gear I use to make these models! 'Oldest Rick Trick in the Book' This is the 9 gauge Plasma Pistol from Rick and Morty Season 3, Episode 1. I painted this with Metallic Folk Art Color Shift…
Ideally print in PETG rather than PLA for more elasticity, tree supports suggested.
Made this for my toddler who is always grabbing our phones
This is a fake/dummy battery that allows you to use any larger battery (eg AA or AAA) instead of the low-capacity CR2032 You will need 3D print "part +" 3D print "part -" copper washer (used as "+ contact") M14x20x1 -…
A remix of the excellent case by @AlleyCat for the Faketec, featuring an OLED screen, a buzzer, and a vibro. It was modeled for the V5 board, but it should work with others as well. Assembly order: glue the buzzer and the vibro to the…
Updates Added a new front part version that fits the (NEW) 0.96" OLED , since the old version was designed for the original OLED size. Thank you @JLO_2137313 for the feedback! Added a version that fits 18650 batteries . It’s a bit…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This is an impeller for my Fakir AS 1037 NT hand vac. Im hoping to impove the suction force with it. As i took a closer look at the vac and its Motor it felt like the Motor is pretty powerful, but nearly under no load because the impeller…
Do you wanna prank friends? No problem, download this stl and have fun!
Wanting to try out a new look, I was about to order some fake piercings. However, I realised I could print them myself. The model includes 3 different sizes: 8mm, 9mm and 10mm. I've included both a version you can use immediately off the…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Custom version of the Digispark attiny85 BadUsb fake usb memory case. https://www.thingiverse.com/thing:2347216/remixes Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12mm Infill: 20…
Recommended print settings: Material: PETG Walls: 8 Top/bottom: 8 Nozzle: 0.4 or 0.6 Infill Density: 30% Infill pattern: Tri-Hexagon (best horizontal strength) Bed: 65° Fan: 20% max Adhesion: Skirt (or choose your own) Print & infill…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Hi, I hope this these files are helpful to you on your arcade project or just as gifts or keychains or christmas ornaments! Updated to add: earrings/necklaces! I got the idea from a blog that recommended doing fake buttons with spraypaint…
Fake coin to be used in shopping carts
exactly what title said
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Just an awesome realistic fake ID. Meets all of your fake ID expectations, possibly exceeding them! Its incredibly detailed too! Want to look older than you really are? why not? Our cautiously made fake ID can fool even the most observant…
quest 2 controllers credit to pistolaum on thingiverse
Trick your friends with this fake iPhone 11 Pro Print instructions No supports
Replacement parts for old IKEA kitchen that is not produced anymore.
This is a fake book that with the proper finishing, could look like an actual book. Isn't it annoying when you have just a little room left on your bookshelf but you don't want to buy a book? All you have to do is print this sideways on…
Compact and sturdy case for Meshtastic / MeshCore node build. The case has a snap in back cover and a spacer to keep the battery separated from the electronics. The case allows the use of RG178 pigtail for better radio reception. The case…
Imported from my designs on Thingiverse. Original upload was 25.05.2019 (dd.mm.yyyy) New info, only on Printables: I might visit this project some time in the future as my modeling skills are better than pre-pandemic. If you're…
Fake cigarette remix: added a little hole so it can be used as earring, keychain, etc. Printed in dual color PLA (white and gold), I just cut the model at 20mm in z to create two different parts that can be printed simultaneously. This…
This is a fake token to replace your real quarters! Reminder: DON'T GET IN TROUBLE!!! besides that you should be fine. Happy Printing!
A fake bar of soap. Nothing more. No functionality. Just a stupid, pointless product. My favorite type of prints! The only use I can think of is for April Fools' Day.
A BTS friend of my BTS friend extracted the picture of the music video "Fake Love" and created a silhoutte out of it. The silhoutte was converted to a vector file and finally into a stl file. We printed the Thing with a thinckness of 3…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This cap can be screwed on an PETling to simulate a German “Vermessungspunkt”. Put the PETling in a hole in the ground and on first look, it looks like a regular “Vermessungspunkt”. Print with 0.2mm layer hight or below. No supports needed.
The source marked this model as adult content.
just print it and stick it somewhere on a wall and watch!
Gothic Voronoi Fake Nail Set : Very iffy on FDM.. even with .2 nozzle. but I laid it out where it seemed to complete the set the best. BEST ON RESIN : FULLY CURE. SIZE TO YOUR NEEDS.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I was repairing a leak in my household plumbing and in the process had to take the kickboard of my old (~2010) IKEA cabinets. In the process I broke one of the clips that holds them on, so I modelled and printed a new one. Category:…
Works with the 38-mm x 20-mm el cheapo fake tealights. Also check out the original design by u: Perinski . Category: Decor
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Fake stone - key box Print settings: PLA/PETG no supports needed
The plastic of my old Ikea FAKTUM kitchen leg shattered into pieces. So i remodelled it. because Ikea used a very weird thread on the top screw, i also remodelled that one to use M30x3.5 thread. I printed this on my Prusa Mini+ with the…
its pretty cool to prank your friends
Parameters: nozzel size: 0.4 mm or 0.2 mm layer size: 0.2 mm or 0.16 mm NO SUPPORTS Addison can be practical, but not necessary because there is a flat side. You can find a slicer screenshot in the images. Make sure you can see the…
Fake vaporiser for use as a prop, sized like a medium vaporiser. I modelled in a draw-hole going from the mouth-piece to the base of the vape, so you can mimic taking a real draw. The horizontal hole isn't modelled and was drilled out…
its a fake quarter for Aldi's carts because i never have change for those things and wanted to make a simple one for my self
These were originally drawn up as seperate pieces, but were then all placed onto the fake electronics board for use on R4's dome panel. Plus some other pieces that I had planned to fit LED's behind, again, all part of original plan for…
A simple one-piece 608 bearing (8mm x 22mm x 7mm) without balls suitable for replacing a real bearing for testing or static modifications. Designed with tight tolerances, rounded corners, and printed in PLA in minutes. Edit: Added a new…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Printed in two halves, glued together, with transparent plastic window and printed photo of a real camera inside. A quick and dirty design, but looks convincing enough up in a tree. STEP files added for customizing/remixing/
Great for trolling teachers or catching thieves.
Detailed model even with ribs underneath a button. Printing upside-down should resolve all support requirements but will probably require a bit of sanding for a better finish.
I didn't know how the fit would bit for the holders in the base, so the base cut out for each holder is scaled up to 102% making the hold for the holder slighter larger than the holder. This works well if the magnet alignment isn't quite…
When my friend was diagnosed with lung cancer, he had to stop smoking quickly. The chemist provided patches but having nothing in his hand was a big part of the addiction. I created this dummy cigarette as a smoking cessation aid, it…
This is a fake vape. I don't reccomend bringing it to school my teacher called my parents for that
LAST UPDATE 08 SEPTEMBER 2026 - 4 hooks tag library _______________________________________________________________________ MOLLE Pouch ID Tags – Labels, Pictograms & Blood Types A large and growing collection of 3D-printable MOLLE pouch…
il n'y avait pas de modèle disponible d'une lame comme celle-ci, j'en ai donc fabriqué une qui est une réplique parfaite d'une lame de cutter classique. mais rappelez-vous qu'elle n'est pas finie, alors ne jugez pas
What do you do when you take out your fake christmas tree, only to find that the base has broken?! You print a new base!! This is the base I needed to fix my fake Christmas tree. Easily printable with no overhangs. This one used my…
Designed from scratch in tinkercad using measurements taken from the FakeTec board I built. It's at least mm-accurate.
You find a real card‘s back and stick it on the back of the fake card
Changed the case form, added space for batteries up to 10mm thickness, 60mm length and 40mm width.
