24 models
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
Might also fit other cameras ? I printed this in TPU95A with the finest settings my printer allows, and it fit perfectly with a bit of a push+screw action when installing. I am also sharing the FreeCAD file in case you want to modify it.…
Charger model: A1424. Macbook model I used it with: A1398.
Helps simplify plugging both MagSafe and USB-C connectors into the left side of a MacBook Pro. Four Versions (all in single STL file): All have standard MagSafe connector for MacBook Pro Max Two of them have the larger USB-C connectors…
Requires a 1/4 20 screw and M3 Socket head with nut to fit to the camera. Since I used the strap lug to secure the grip I replaced it with two standard size camera strap triangles that allow a camera strap to be fixed to the grip side of…
Just a small design inspired by the Decware DFR8 phase plug for the Fostex FE206En. This is not by any means the exact copy... it's just my model that i experimented on to sound quite nice Update Mid October 2021: i uploaded newer…
This version allows you to break the rivet and electrical contact out of the top of the broken battery case and then insert it from the side as a unit. That way you don't need to redo the rivet. The hole in the side will allow the rivet…
Držáka světel používaný u Subaru Impreza Headlight bracket used on Subaru Impreza
This is a replacement lever for the Nikon FE2 self-timer. It assumes that only the plastic part has broken off, and that the screw and metal insert are still attached to the camera. Replacement levers are available on eBay and similar…
Based on decware pictures and a lot of experimentation this is a release of phase plug for the new NV version Printed in PETG but PLA should work aswell
I needed feet with a smaller profile due to the size of my work area. There are 2 versions. Either print 4 of V2, or 2 each of V3a & V3b.
GE GFE26JSMAFSS Refrigerator Freezer Track Stabilization Gears Optimized for easy printability and installation with 1x M3x16 bolt and one m3 nut. Supports dependent on your machines ability to bridge, not necessary for most.
Ergoknife2 adjust tenting stand 8x M4 nuts 8x M4 bolts 14+mm 4x M3 nuts 4x M3 screw 5mm
A small practical stand for the MagSafe2 85W power supply. This stand allows you to fix the MagSafe2 power supply on the desk or on the wall. It has pre-drilled holes that fit 3mm screws. Due to the slim construction white, it takes no…
Ergoknife2 adjust tenting stand
To repair your charger last time(!), You need the following items: DC jack 5.5X2.5mm: https://s.click.aliexpress.com/e/\_dVGNXYr magsafe2 to DC 5.5x2.5mm cable:…
I love Apple products, but the cable of the MagSafe2 AC adapter is a problem because it quickly becomes frayed. Since Apple does not consider improving it, I made the MagSafe2 AC adapter neck protector. Print Settings: Material: PETG…
This is a larger Kitchen Safe base, around 104 mm space underneath the lid.
wesn box lid uses the screw from the original brass lid of chris ramsey puzzle box
Design plus simple, et probablement moins bon, que la pièce originale qui était cassée. Semble faire l'affaire pour le moment. Je pense qu'un re-design complet à base d'aimants serait plus pratique. Peut-être pour une v2… Conseils…
I modified OddlyCinematic's Nikon FE/FM/FE2/FM2 Grip with BumpMesh to add some texture to the grip section.
Requires a 1/4 20 screw and M3 Socket head with nut to fit to the camera. Since I used the strap lug to secure the grip I replaced it with two standard size camera strap triangles that allow a camera strap to be fixed to the grip side of…
