Nikon FE2 self timer lever (R)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement lever for the Nikon FE2 self-timer. Requires that only the plastic is broken off and the screw and metal ins
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement lever for the Nikon FE2 self-timer. It assumes that only the plastic part has broken off, and that the screw and metal insert are still attached to the camera.
Replacement levers are available on eBay and similar platforms, but tend to be either quite expensive or out of stock — hence this printed alternative.
When disassembling, secure the brass insert with calipers and carefully unscrew the silver screw. I printed in ASA at 0.1 mm layer height on a Prusa satin surface, which naturally produces a leather-like finish on the cap. Print with supports enabled, and make sure to remove them completely with no residue left behind, as this is critical for proper fit. Finally, secure the brass insert with a small amount of superglue and press it in firmly.