7,284 models
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant
Use random seam position + classic wall generator. A simple wearable fidget ring that works as a spinner, allowing the outer ring to rotate smoothly around your finger. Designed as a compact and discreet fidget toy for everyday use,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This phone holder is designed to hold your phone vertical or horizontally at three different angles: 60, 70 or 80 degrees. The holder comes in 2 different models, the lightweight or infilled model. The lightweight model prints on its side…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
All my designs are free to download, but if you like my work please consider to buy me a coffee =) Ferguson TE20 - Fully printable kit - scale 1/18 EDIT: Since the Ferguson TE20 sometimes have the headlights mounted on the sides of the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Suitable for color printing Outer diameter 10mm The inner diameter of the dot is 6mm Height 2mm Layer height 0.2mm Magnet with a diameter of 6 mm and a height of 1 mm (magnet holds without glue)…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
06/01/24: I have released my UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale . Remixed for my Unimog RC design (in progress). See my Diff #4 for mounting instructions. You need 8 MR63ZZ ball bearings per differential (for Unimog 16…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Ferry enables the small Surprise Egg Tiny Haul Truck from [AGEPBIZ] https://www.thingiverse.com/agepbiz/designs to be transported over the water. So you have fun on land and in the water :) Surprise Egg #1 - Tiny Haul Truck…
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
Print approx. €9.17–€11.21 excl. taxPreliminary estimate for PETGSource material: PET
Cette figurine représente Calcifer , le démon du feu lié par contrat à Howl dans Le Château ambulant . Avec son apparence de flamme vivante aux yeux expressifs et à la bouche souriante, ce modèle capture l'essence du personnage tel qu'il…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 8 different pieces - Mix and match as you please, or print'em all! :) Flat bottom to ensure that the napkin ring doesn't rotate on the plate. This set goes well with another way to…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
Cheep Cheep the Puffer Fish from Super Mario Brothers.
Print approx. €10.31–€12.60 excl. taxPreliminary estimate for one variant
This modified/kit-bashed buffer segmenter (front plate) for the MMU3 cassette buffer, in combination with @Melvin_131612's excellent MMU3 buffer mount allows the buffer to be mounted horizontally, lying down on its side. I made this…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for PETGSource material: PET
Assembly Instructions Set the ferrite core in the holder. Fasten from the back of the frame with screws. To mount the holder you will need the following fasteners: M3x8 screw (2x) Print Instructions print settings: 0.30mm DRAFT filament:…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Dies ist ein Remix von LorenzS' Fernsprechbude. Die Bude wurde verkleinert und das “F”-Zeichen hinzugefügt. Außerdem wurde die Bude auf den Rücken gelegt, damit man das F-Zeichen mehrfarbig drucken kann.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Remix of a pirate sword handle for a pool noodle sword that does not need supports and now has tighter clearance for the glue join along with an updated interface design. Printed out of PLA at .2mm layer height. No supports needed, CA…
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Very nice and detailed car wall art model of a ferrari sf-90 Stradale. Size can be adjusted as wanted.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Here is a solution to reduce the buffer floor space of the Prusa MMU kit. You will also find the spacers for cable management. 04 October 2020: Buffer spacer longer version added
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Really small pill-box/container (3cm high and 2.4cm wide closed) with threaded caps for a better sealing. In STL files there are also a cap with a smile and one with an hook. Hope you like it! Ps: the hooked cap could need supports to be…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
The cable mounting consist of two parts. You can fix the bottom part with two screws e.g. direct on a wall, put a cable in the holder an slide the top cover in the holder. The holder consists a small compression spring that will fix the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Ferrari 499P Hypercar #50 (2022)
Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant
DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
1976 EXOTO TIPO 312T2 Fourth, 1976 Grand Prix of Italy, driven by Niki Lauda Nobody expected 1975 World Champion Niki Lauda to return to the cockpit after his tragic accident at the Nurburgring on August 1, 1976. In the days after the…
Print approx. €8.21–€10.04 excl. taxPreliminary estimate for PETGSource material: PET
This strainer is easy to print and can be used in conjunction with the sink drain stopper. I printed it in PETG, however should also work with other materials. There are three different sieve types with different drain diameter offered.…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
dryer for a silencer (rifle) to avoid damage caused by humidity. drawn by Autodesk Fusion 360. Printed in PETG with 30% infill. You also need 4 ruthex inserts and 4 screws M3 x 12mm. For the fan i used this one from amazon…
Print approx. €9.70–€11.86 excl. taxPreliminary estimate for PETGSource material: PET
differential - functional model
Print approx. €8.19–€10.00 excl. taxPreliminary estimate for one variant
This is a complete ecosystem of parts needed to place a small camera somewhere and fine adjust its orientation around all three degrees of rotational freedom. The problem: Using an action camera to capture our wild and crazy activities…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Summary - Replacement fishing rod ferrule ring. Repairs a fishing rod that has a ferrule that is missing the smooth ring that protects the fishing line from direct contact with the metal ferrule ring. Story - I grabbed my spare rod to go…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
PTFE-Schnellkupplungen zwischen MMU2S und Puffer Print instructions Um die PTFE-Schläuche zwischen MMU2S und Puffer möglichst einfach und schnell abzutrennen habe ich zwei Adapter für den S-Puffer zum Drucker (Typ C1) entworfen. Vor allem…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
5 ml Meßlöffel für Flüssingdünger Hier ein kleiner Meßlöffel für Flüssingdünger. Die Füllhöhe bis zur Markierung ist 5ml. Mittels des Lochs im Griff kann man den Löffel aufhängen. Schichthöhe = 0,1mm Translation DeepL 5 ml/ (0.30512 in³)…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Here is my design of a hexagonal LED Logo to put in your printing booth. The covers are interchangeable so you can even design your own front! The whole print doesn't require any other hardware than an LED strip. Also you won't need any…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Zum greifen von Zigarettenhülsen
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for PETGSource material: PET
Les pièces d'origine s'effritent ou se cassent avec le temps. Ce kit est un complément à “ Verrou volet battant” qui est présenté à part du fait des ses spécificités pour l'impression. La particularité de ces pièce est liée à l'exposition…
Print approx. €10.10–€12.34 excl. taxPreliminary estimate for one variant
A Differential, built with M10 bolts, 10mm (6000 series) bearings and 5mm bearing and bolts. If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
Print approx. €13.49–€16.48 excl. taxPreliminary estimate for PETGSource material: PET
This tool allows you to simply transfer a residue from one resin bottle to another. In addition, you can also use it with a filter funnel, the small hole on the side lets air through and facilitates the flow of resin.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This version helps all those who are looking for a special solution to optimize filament routing. This version allows the filament routing to the MMU to be perpendicular without a radius and reduces the bends. This version is also 100%…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
I saw an infinity mirror with a tunnel and a ladder - don't remember who posted that. Always wanted to have a Jefferies tube. Print instructions Print the big part twice, laying on it's back. No idea how to fix the stringing for the grid,…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for one variant
Ein Satz verschiedener Haken zum Schrauben oder Kleben. Wir nutzen diese Haken als Schlüsselbrett. Die Bohrungen sind ausgelegt für Holzsenkkopfschrauben Durchmesser 2,5mm. Ungenutzte Bohrungen kann man mit "Abdeckung Bohrung" und etwas…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Multimaterial - MMU 3 Multicolor Print-MK3.5S with multi colored segmenter-r3 This is a Remix / Revisitation of the original .gcodes of MMU3 Multi Material Unit. These .gcode are specific for printing by MK3.5S, and are provided by…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
An adapter for using a Swiffer duster onto a Vileda rod to make cleaning a bit more comfortable. You can simply screw the adapter onto the rod and start cleaning the ceiling or something that's onto the floor.
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for PETGSource material: PET
Vine Fermentation Lid was created for preparing vine from fruits and herbs in 4 litr jar. It consists from lid, burbling pipe and small cup with water.
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Hilfsschablone zum knöpfen von Freundschaftbändern
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Bird nesting house with 3 different looks Timber frame, Bricks and Football. You will need all the common files and a set of one of the designs to make a house This Bird house can be assembled mostly mechanically, only the Rooftop of the…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
Ferrari Dino 156 F1 #4, Spa, GP Belgium 1961, Driven by Phil Hill.
Print approx. €5.97–€7.30 excl. taxPreliminary estimate for one variant
The first in the Japanese Elemental Oni series - see also TyphoOni (Water) , OniKaze (Air, Wind) , Little Sakura , Little Coral , Little Bramble Meet the InfernOni About 4.5 inches (113mm tall) - Can be sized bigger or smaller. Created…
Print approx. €2.87–€3.50 excl. taxPreliminary estimate for one variant
Very nice and detailed wall art silhouette of the classic 1966 Ferrari 275 GTB Size can be changed. I accept suggestions
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Print approx. €9.39–€11.47 excl. taxPreliminary estimate for PETGSource material: PET
Simple G-Scale buffer stop, designed for being easy to print (lying on the flat side), easy to mount (push through rail from below between sleepers) and to work well. Not intented to be a scale model of a real buffer stop.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Cute Easter bunny figures designed to function as salt and pepper shakers. These decorative bunnies add a festive touch to your Easter table while serving a practical purpose. Note: I don't know how critical the contact of Salt and Pepper…
Print approx. €2.40–€2.94 excl. taxPreliminary estimate for one variant
A model made as a gift for a researcher. Printed using PLA, the translucent atrium was Atomic Filament Translucent Smoke Black https://amzn.to/4aeFIej Use an CA glue with an accelerator for best results when gluing PLA! These are the…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Servoaufnahme, um einen Standardservo zur Ansteuerung der meiner Lenkachsen aufzunehmen. Er wird hinten durch die ersten Anlenkungen der Achsen fixiert, vorne sind zwei Bohungen im Rahmen des Goldhofer erforderlich. Damit wird zugleich…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
I wanted to use my printer the day I set it up, and the printer did NOT ship with a filament runout sensor mount. Found one on printables, but it needed an added pneumatic adapter which I didn't have - so I remodeled it to just hold the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
What was the trigger... Utricularia jamesoniana ( more info ) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud…
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
A Drill Bit Holder for the ALDI Ferrex Pro power drill
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
Mi è venuta l'idea per le mie piantine di viti. Si può utilizzare anche per i fiori in vaso per tenere lo stelo diritto. Stampato in pla per il rispetto dell'ambiente.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
I found the 25 mm length x 15 mm width best adapted. Printed in blue and yellow PLA without MMU. Used to fix a brokken zipper. A nice way to show support to Ukraine ! Imprimé en PLA bleu et jaune sans MMU, aux dimensions 25 x 15 mm pour…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Made for Cut the main hole for 8 inch subwoofer with a Bosch GST 150 CE i use a 5mm bolt 40mm long
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Todo: increase steel slot thickness as it’s too snug. add spring or bead to hold rod/steel in without too much resistance
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
The controller for ‘CREATE Wind Calm’ ceiling fans can be mounted to a flat surfaces by using this spacer. The intention of the thight fit is an easier mounting to the wall. Feel free to edit, if You prefer another solution. Der…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
Garrett Sniffer Bottle Holder (Safe your gold)
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This allows you to attach two honey bottles so the contents of one can flow into the other without making a mess. It has arrows around the outside to indicate which direction should be placed downwards. The inside is designed to keep the…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
a plant support for different plants in a modern design different shapes and holes for the best grip. / eine Pflanzen Stütze für verschieden pflanzen in einem Modernen Design verschieden formen und Löcher für den besten griff.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
It is always slow to drain the last bit of thick liquid stuff from its container. This presents a small challenge when trying to save it. I found my wife using funnels and clamps and trying to balance them for a transfer to the new…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
HueForge
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
Ich habe dieses Rad entworfen und gedruckt um meinen Koffer zu Reparieren. I designed and printed this wheel to repair my suitcase.
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for PETGSource material: PET
The Ferrari 375 Plus in which Umberto Maglioli won the 1954 Carrera Panamericana
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for one variant
Haken der die Kofferraumablage an Ort und Stelle hält. Hook which fold the trunk cover in position
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
Ungeziefer Bekämpfung Schaben Leerköderdose Schaben Leerköderdose für die geschütztes Ausbringung diverser Schaben Fraßgele.
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Ferrari, as usual, was represented by an excellent lineup of private cars. The fifth edition of the Carrera Panamericana was characterized by the duel between two Ferrari drivers: Umberto Maglioli driver of the “four-point-nine”, a 375…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
HueForge
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
Puffer Jacket Catchall Bowl is a playful yet functional storage bowl inspired by the soft, quilted structure of a winter puffer jacket. The inflated, stitched look contrasts with its solid form, turning an everyday organizer into a bold…
Print approx. €5.85–€7.15 excl. taxPreliminary estimate for one variant
Halter für Fernbedienung von Beamer und Präsenter zum an die Wand Montieren.
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
I designed this Gridfinity bin to organize my small woodworking shop. This 1x4 Gridfinity bin holds the Hongdui Chamfer plane and the included tool used to change the cutting blade. The bin has no stacking lip but holes for magnets on the…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This is a simple mount for your RC car's shock absorbers so that you can easily change the oil. ----- Dies ist eine einfache Halterung für die Stossdämpfer deines RC Autos, damit du den Ölwechsel ganz einfach erledigen kannst.
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant
Update This model has been superseded by Transfer Funnel & Adapter System . ---------- This is a variation of my original Transfer Funnels modified to fit the steep double spiral threads of Eucerin® product bottles. See the original model…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
Background So my Dacia Duster from 2011 started rambling when driving. Turned out that the rubbers in the assembly supporting the bonnet (or hood) where a bit squashed. New ones where expensive so I challenged myself to model and produce…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
After sawing some aluminium rods and pipes to length I always end up with a bad cut and rough edges. The inside edges of pipes are easily cleaned up with a deburring tool but the outside edge is more tricky (if you don't have a belt or…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
The M3 Square nuts (2 each) are sized for the more commonly available size (2.3mm thick) - the Prusa nuts are slightly thinner (1.7 mm) and will slide out of the slots. When used just to hold the buffer plates together, 2 M3x25 or M3x30…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Hallo liebe Community Habe hier einen kleinen Helfer zur Abflussreinigung / Haarentfernung in Abflüssen in 3 unterschiedlichen Längen: 120, 140 und 180mm Einfach rein in den Abfluss, ein paar Haare greifen und drehen als wäre es…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is our first attempt to create something with FreeCAD and print it with our PRUSA printer.
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
Gridfinity-compatible holder for terminal ferrule crimping pliers, keeping the tool secure and organized.
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for PETGSource material: PET
I purchased some cheap polishing wheels from my local “Wharf Carriage”. They came as advertised, 6" and for a ½" or ¾" arbor (two sets each of size specific plates). Not sure how you're supposed to match them up but just NO. The wheels…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Jesle na seno pro klec typu Ferplast Arena, kdy je nutné, aby měl zavěšení odskočené.
Print approx. €14.29–€17.47 excl. taxPreliminary estimate for PETGSource material: PET
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Motivation I found this nice model of "Helferlein / Little Helper" by DIY Wizard (based on the popular model "Dummy 13"). To illuminate the bulb you can order a magnetically switchable device ... which I did not have available for a short…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
Updated (v2) - the first 2 photos show the original v1 model, and show how the buffer weight puts too much curve on the PTFE tubes to the MMU3. Changes in v2: Angled the buffer mount so that the buffer-to-MMU3 PTFE tubes are vertical as…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
