141 models
Please use short (4mm) m3 inserts on the case to attach the clip on with m3x8mm screws. The bottom corner of the case is open so its easier to push the echo mini out of the case. The screw holes at the back are spaced 24mm apart so make…
Protection case for FIIO Snowsky Echo Mini, best to be printed in 0.12mm layer height. Included 2 design: Plain no symbol no logo with 0.2mm depth logo and symbol. No support needed as well, easy installation.
Didn't find anything acceptable and made my own version of comfort strap Printed from TPU 60D Print settings perimeters - 4/5 top/bottom layers - 0 fill pattern - honeycombs 30%
!!! If you have a different model, let me know and I will see if I can make it !!! Hi! I designed this in my free time and would really appreciate it if you could leave a comment or share a make after printing it. It means a lot to me and…
A simple mount to attach the FiiO K11 to my desktop. Screwholes 4.3 mm and countersunk, even though I used 3.0 x 12 mm to attach it. Print with tree-supports on the inside (less clean-up as the surface will be hidden by device itself when…
Note: This will not fit the Fiio M11 Plus or the M11S. Only the original Fiio M11. (April 7, 2025) I designed a stand for my Fiio M11 that had a number of features: I wanted a charging dock style stand that would keep my M11 charged up…
FiiO Snowsky DISC Case Design I made a case that fully encompasses the DISC, in 2 parts. I didn't like how the screen, which was vital to the usage of the device was protruded and exposed, so I made the front part with a simple raised…
This model allowed me to clean my desktop space and get the DAP/amp closer to my chair for more length with my headphones. Feel free to message if you find that it needs modifying and I'll see what I can do for you. Please note that the…
Wanted to undermount the headphone DAC so I didn't have cords running over my desk.
This model adds a printable shirt or belt clip for the Fiio BTR7 that allows one to wear the little bluetooth DAC that could clipped to your shirt or belt like the BTR5's included case can. The leatherette case that comes with the BTR7 is…
FiiO K7 undermount with lip
A case for the Snowsky Disc, simple as that. Also a version with space for a magsafe ring.
I wanted to make a case for my new FiiO SNOWSKY Echo Mini MP3 player, so I created a reference model to model the case around. Made with Fusion and calipers. The one that's named “raised_screen” has the active portion of the screen raised…
Strong and practical under-desk FiiO K5 Pro hanger/ mount for your desk! Zip tie your power and audio cables to the hanger for cable management Screw holes are 90mm apart center to center Max screw width 5mm Max screwhead width 10mm
This is a desk mount for the Fiio K5 Pro, this model can be used for both regular desks and desks with frames underneath (up to 25mm). All that is required is to screw into the bottom of the desk and slide in the K5 (you may need to take…
Below desk mount for the Fiio K5 Pro Dac/Amp printed on an Ender 3V2 using Sunlu PLA A basic model of the k5 pro is included for ease of use when remixing Installation: Print two copies of the dac_mount_mk2.stl file Tape one print to each…
Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.
This is a simple fiio k3 under desk mount, screws in, strudy & has a gentle grip on the dac. Print vertical as if fiio enters top. I did 4 walls & 20% infill at a 0.22 layer height but it's a fairly sturdy simple design. Uses 5mm screws…
Sized using K11 model from: FIIO K11 DAC | 3D CAD Model Library | GrabCAD Printed with supports in mounting position with PLA-CF.
Print Details: Overture PLA, Black .4 nozzle, .2 layer height 15% infill no supports I used 4 M3 16mm long screws to mount to the underside of my desk. DAC friction fits in the mount, and abuts the stop in the rear of the mount.
Intro I wanted a cool looking case for my new retro-inspired mp3 player, a Fiio / Snowsky Echo Mini, so I made one. Then I got a little carried away and made a few more variants, including a blank one for other people to mod. Print…
This protective cover snaps on to the FiiO X3 (2nd Gen.) music player, and can be easily removed. Printed with paint-on supports for the SD card slot. This case looks great in Prusament PETG Neon Green transparent, but the WIPE END…
Snowsky Disc Carrying Case Simple magnet-locked carrying case designed for the FiiO Snowsky Disc portable player. I wanted a compact, minimal case that: protects the player during transport prevents scratches in a backpack closes securely…
This is my take on a desk mount for the K5 Pro. The only other version I found at the time would not properly support the amp and always get pulled out when I unplugged my headphones. To secure the K5 in place, put the brackets on the…
This is a remix of the great FiiO FT1 PRO comfort strap with added lock and resize option.
This is small and simple holder for my Fiio K3. Because i want be able to take it with me on holiday it is not fixed in the holder. The holder it self is taped with double sided tape to the desk.
A simple clip similar to the one that comes with the BTR5 to mount directly to your headphones with no drilling required!! The clip simply wraps around the left cup arm and secures to the case with two screws. For this project, you will…
I created a small and simple desk stand for my Fiio Q3 DAC/Amp. I added a tougher version with thicker walls.
Version 2 of my semi-modular desktop and under-desk mount for the popular Fiio K7 and the Fiio BTA30 pro. Please note that this is still a work in progress. Most of these parts need or will continue to be refined, but they function as…
Added a headphone cable wrap (https://www.printables.com/model/34877-earphone-case) to the side of the Fiio Snowsky Echo Mini Case (https://www.printables.com/model/1366785-fiio-snowsky-echo-mini-case-and-pocketbelt-clip). Also added…
Fiio BTR5 under desk mount using 4 M4 screws. Designed with an opening at the back to hot glue a USB C cable in place. The model features cutouts for the screen and side buttons.
Recently got into the IEM hobby and don't like how DAC hangs on its cable. The mount design idea is to keep it attached to the phone and keep buttons easily accessible on the side. As a MagSafe ring, I used this cheap pop socket from Ali…
I liked my case for the M21 so much I made another for the Jade Audio JM21 baby brother. It sits in the case upside down for easy headphone port access. As such you might want to get some fillers for the USB C port and whichever audio…
For mounting a Fiio E10K under (or on top of?) a desk. Differences from the original: Increased height to also accomodate for the rubber feet Bigger knob cutout for convenience (style 2) Slots for coutersank screws A bit smaller…
3D printable enclosure for the fiio K7 or K5 Pro, with additional spaces and drawers for the Fiio BTA30 pro and BTR5. Version 3.0, with some refinements from previous designs and including a locking/ latching mechanism to fix it in place,…
mount for fitting FiiO Q1 mkII under the table top Print instructions prints fine from PETG without any supports
Print the case itself at 100.5% scale and the belt clip at 99% scale for FFF. The print in the photos was done with the case at 101% and the belt clip at 99.5%, layer height of 0.3mm. This worked fine, however, the Fiio was a little…
Desk mount with 4mm screw holes for the FiiO E10K Olympus 2. I used some 3.5mm wood screws Print with a brim if it doesn't stick to the bed.
"The bottom is an enigma of what the f--- is this Fiio?!" - "It tends to rock around" - Z Reviews This 360 side skirt serves as a stabilizer to keep the device from flipping when you press on a corner or side. It is slightly less tall…
Make your beyerdynamic headphones wireless with a FiiO BTR5. This should work on most beyerdynamic headphones, tested by me on the DT770 and DT990, but would most likely work on other beyerdynamic headphones with aluminum yokes. By…
A remix of a very nice IEM case from @KnifeLover_2335150 with larger dimensions! This remix require 6mmx3mm magnets instead of 6mmx2mm in the original Both a regular case and a case with a divider have been included in the remix. The…
Case to hold The FiiO M21 DAP in it's silicone sleeve. With a clip to hang on your waistband. You'll need to modify the clip if you want to use it with a larger belt. Quality PLA should work fine 3 walls 15% infill. PETG might be even…
I modified Paul Fallon's BTR5 case to friction fit on the left side of the Phillips SHP9500 headphones. I made the mount with tight tolerances to snugly hold on to the headphones. When you put it on, you may have to spread the “curls”…
I've seen several FiiO M21 stands but they all had one flaw or another. Mine is sturdy, using a vertical spar underneath to minimize flex. It also has a captive hold on the bottom of the device so it can't slide left or right. And there's…
Hi! I've edited the original model to fit a Fiio SP3. There is also another version on my profile.
Very simple slide-in under-desk holder for Fiio Q3 DACs I didn't like always having my Q3 freely hanging around on my desk, so I made this holder for it. You need 4 small (I used 2.5mm) wood screws to attach it to your desk, and the Q3…
Print in orientation as imported; enable supports touching the build plate. Attach two parts with epoxy/super glue. Print is designed to mate with this magnet . Requires MagSafe case. Works with stock Type-C to Type-C cable.
Update V2: Revised this on July of 2023 to accommodate the included clip as the BTR5 is a slippery device by itself and QOL improvements! The design is now screw-less and is simply friction fit so you might need some taps with a rubber…
This desk mount for the FiiO K5 Pro contains 2 parts. The larger part screws into the desk of your choice. Place the K5 Pro and secure it with the smaller part. The K5 Pro is now fixed in all directions and very secure. The 2 screws on…
Simple but effective bumper case for the DM13 by FIIO in case you move the player around a lot in your house. Can be printed with TPU to add shock absorption.
The Fiio K7 is under desk mount and is designed to house the Fiio BTA30 Pro. This is version 1; therefore, imperfections may be present. This listing will be updated frequently. Please let me know if there are any issues, and I will…
NOT MY MODEL, ORIGINAL MODEL MADE BY https://www.thingiverse.com/GromMaker. Original description: Bracket allowing you to secure your Fiio E10K to a desktop using two small screws. It slides in with a slight interference fit, but can be…
Should of course also work on T30/T40. Print the two parts and screw them on the rails of the T50RP. The screw hole has a diameter of 2.5mm. Works well with a ~12cm 90deg to 0deg 3.5mm cable between Fostex and Fiio.
The body fits a 55x45x4 mm battery. I used a 1200 mAh battery. For reference, that lasts around 26 hours of use with LDAC codec. Also included is a special version of this model and a mount for it to fit onto Sennheiser HD650 headphones…
Light blocker for the Fiio K5, K5 Pro, K7 and K7 BT. Fits around dial with small gap to act as a volume indicator.
The plastic hinges on my FiiO µBTR bluetooth receiver broke, so I made a replacement. You still need the original spring and the small metal bolt. If you lost the bolt you might source a 1mm bolt from something else but I don't think…
V3 - More efficient, elegant design allows the enclosure to dissipate heat better (through the underside of the mount) and improved rear support!! For those unable to mount the Fiio K3 underneath their desk. Angled to drastically improve…
Cover for Fiio JM21. Reinforced 2mm thick cover with heavy to push buttons to prevent false pushing. There are two options: One has "tight" buttons built into the material. The other has separate, click-in buttons that are more tactile.…
Quick remix to add buttons & charging port. Print from flexible TPU - like 92A, 90A or even 87A. (98A is too stiff to insert the device). Case is tad larger than device, but play is less than 1mm in vertical direction (remember, it's just…
This is a fairly simple but (hopefully) stylish desktop mount for the fiio K3 dac. I originally had mine mounted using my underdesk mount, someone requested a dektop one & this is how the design came about. Elevates the K3 off the desktop…
Super simple mount for FiiO K3 DAC printed in minutes
I really liked hellobritt's Under Desk Mount for the FiiO E10K, but I wanted it to be on the desk, so I created this simple remix in PrusaSlicer 2.8.0. Just load the .3mf file into the sIicer and get to printing (or change the parameters…
This is a simple under desk mount for the Fiio E10 Olympus DAC. Fixed to the desk using double sided nano adhesive that I cut into thinner strips: https://www.amazon.co.uk/s?k=nano+tape To keep the DAC from sliding out I just used a small…
This is a TPU Protective Case for Fiio M3 Pro Hi-Res Player. Hope you love it.
Print and pop it on top of the existing knob. Available in a filled and hollow variant. If you want to tweak anything, such as the diameter or height, the Fusion 360 file is included, with parameters for every value.
Elevate your audio experience while decluttering your workspace with our 3D-printed under-desk mount for the FiiO E10K DAC. Designed for seamless integration with the DAC's original rubber standoffs, this mount ensures stability and easy…
It should be printed twice, so one part can be mounted to the front and another one to the back. 3mm lip and holes for rubber feet help with the stability. I have made it with a dilatation, to make it easy to take out by just pushing it…
Print arm and arm cap from something solid. I used PETG. Print strap from TPU. Disable top and bottom from the middle part. Change infill to something you like. Installation instructions: -Remove yokes from the headband and slide arms on…
A under desk mount for my old Focusrite Scarlett 2i2 and my new FiiO K13 R2R. I realize that pretty much no one will have this exact combo, but since one of my viewers asked for it, I figured I just might upload it. Especially for those…
Case and cover for Fiio JM21. The cover is a bit thin and may need to be reinforced with solvent. Carrying case for the player in its original case or in the included case. Printed in PETG. Case codename: "Domino."
I kept losing my music player and the case it came with was yellowing. This model fixed the first problem, But it's also starting to show its age... The transparent look is cool to see the various infill patterns. I believe the one I used…
I wanted a sturdy box to protect my new Fiio M21 DAP. I designed this to hold the DAP while it's in the factory rubber protector. The logo is flush with the top of the lid if your printer supports multi-color printing. If you place the…
A case and cover for the Fiio JM21. The cover is a bit thin and may need to be reinforced with solvent. This carrying case is for the player in its original case or the included one. It's designed for carrying with a set of in-ear…
PLA layer height: 0,2 Infill: 25%
Well I am being forced to return to the office and I need my tunes. I didn't want my phone and DAC just laying on the desk so designed this.
I made this model to attach my Fiio K3 to the Raz's Desk Organizer. Since i use the sound card both at work and at home, i have added a magnetic USB-C mount so i can quickly attach and detach it by just pulling it out The magnetic usb-c…
Simple screw mount for the FiiO K5 coming in at around ~10g material for one piece. I used 4,0x20 Screws.
remix of that one with screw holes - now you can attach adhesive strips to the side instead if you like that better.
A better version of the Fiio BTR5 Holder.
Hi! I've edited the original model to fit a Fiio SP3. There is also another version on my profile.
It's compatible with the Fiio K3 and BEKANT IKEA table. Compatibility not tested with motorized version of BEKANT table.
Couldn't find any existing docks/stands/mounts that suited my needs, so I put together a very basic dock for the Fiio Snowsky Echo (note: NOT the Echo Mini!). There are 2 versions of the dock. "Tight" will securely hold the player (caveat…
Case for the FiiO BTR17 . Version 1.2 - Optimised latch and 3D model cleanup. Unlike the included case, it is designed to latch onto the device, reducing the risk of the Portable Bluetooth Dongle/DAC and Amp falling out. This has also…
A protective case for Fiio A3 Category: Audio
This is a design made by framalho on Thingiverse. I find it very lightweight, sturdy and elegant.
An underware ( https://handsonkatie.com/underware/ ) holder for the Fiio K3 DAC compatible with the standard underware connector. You can find the model on my onShape…
Simple mount for FiiO K5 Pro with gridfinity.
See other models for my desk at https://www.printables.com/@Morbier/collections/1571699
These are two simple brackets designed to mount the Fiio K3 DAC under a desk with a single M3 screw on each side. The print is quick with no excess material, providing a stable hold. The DAC is inserted by flexing the brackets slightly.
I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…
This is the case for FIIO KA15 dac with belt clip. Supposed to be used together with default leather case. Clip part was taken from the original model. Box part was fully designed by me. It's not ideal, but it's like 10th printed…
Travel case for the M21. Print the case in any any plastic you like but remember if you're going to have it in a summer sun hot car, you probably want to avoid PLA. 2+ walls +15% infill. You'll need 6 M3x18 or 20mm screws for the hinges…
This is a headphone stand, with a slot at the base for a Fiio Q3 DAC. Size is 120x120x236, so it will fit many printers, and support many headphones. I know there are nicer designs out there, BUT this is: functionally satisfies my needs…
I selected the minimum height that provides acceptable bending of the headphone cables. At the same time, the minimum material consumption and printing speed are ensured. It seems to me that the look is quite stylish and light. It is…
I have a metal clip, and I decided to make a case for the Echo Mini to attach it to my belt. To attach the part to the clip, I used glue and additionally riveted it with a 3D pen. Dimensions of the metal clip - 55 x 25 mm, thickness about…
This is a simple under-desk for the FIIO K11. This is also my first original design using Fusion 360! I got this to use with my Sennheiser HD 600's and its awesome for my other headphones since it has a quarter inch jack. This is not the…
Tired of FiiO's poor power management? Wish you could get a whole day out of your Snowsky Retro Nano? Well now you can and somewhat in style. Fits a 963450 battery, but this can be altered with relative ease as I've included a STEP file.…
I wanted to make a mounted holder for the Fiio BTR5. This is a very simple version, it does not snap into place, but holds the BTR5 snug
