Counting matching models…
A Wall Mount for the Amazon Firestick Remote Control Printed in Tinmorry Black Matt PLA i wanted to upload the *.stl but the website tells me its an invalid file format ? -_-, so i opened it in cura and saved it as *.3mf ( ignore the…
Create long-lasting flames with this waterproof firestarter! Flames last 10+ minutes, even in the rain! No plastic is burned for this model - instead, the mold is used to create a waterproof wax and dryer-lint (or sawdust, paper, etc)…
print with no supports
4-7-2024 The Amazon Firestick remote now comes in a new larger version called the Max Firestick. I have modified the case to accommodate the new remote. It is labeled as the Max version. I do not own the Max version but made the changes…
I had a bunch of 6.5mm and 8mm Ferrocerium rods (aka firesteel or fire steel) I've had in my survival "bucket" for some time. I finally took the time to design a "handle" that the rods can be inserted into to assist with their intended…
This idea was inspired by the survival paracord bracelets that are meant to ensure the wearer always has a length of cord. I always liked the Monkey's Fist knot, and thought why not put something useful inside rather than a wooden ball?…
Here is a cover for your Amazon Firestick remote. It is made for TPU and will require supports. I probably should have used a different color, but I had black laying around. So, for now, it's black. The remote just slides in from the top…
This model functions as an insert in an Altoids-style tin to hold fire-starting materials. I designed it as a gift for Cub Scouts who were “crossing over” into Scouts BSA. The insert will fit in a tin that is approximately 95 x 62 x 20…
FIRESTAR As a child, I always enjoyed the cartoon show "Spiderman and His Amazing Friends". This came out in 1981 when I was 8 and Firestar was above and beyond my favourite character. I was already an avid reader of comics by that point…
Keep your Amazon Firestick remote (and similarly sized remotes like the Kogan 32" TV Series 9, RH9210 remote featured in the picture) neatly in place with this Multiboard remote holder. It’s designed for side-by-side mounting using a…
This is printable version of the Firestrike PowerUp 4.0 plane. Print at 0.1 layer height with no infill due to model thickness. Very slow print speeds for the vertical fins is required as well as time for them to sufficiently cool between…
Keep your Firestick remote in a dedicated place right next to you with this holder. It was made to fit the Amazon Firestick, and slide in place on the side border of a bed. In our case, it was a 50 mm wide, 23 mm thick border, but we are…
Start a fire in any conditions - my tests have shown more than 10 minutes of burn time, even in the rain! The FireCube uses just dryer lint and candle wax to make a long-lasting and safe firestarter. The cube is designed with slits to…
Needed a wall mount for fire stick remote. Stuck with double sided tape. Remote fits okay with the angled part being slightly off but it having a nice slightly loose fit. Created a version for the voice remote here:…
This is a replacement battery compartment cover for the L5B83H 2nd generation Amazon Firestick Voice Remote. This remote is used with the Fire TV Stick, Fire TV Cube, and certain smart TVs. It is nicely contoured with a flat base allowing…
A simple 6mm firesteel holder for the basic Morakniv Kansbol sheath, simply clicks to the slot at the back of the sheath. A firesteel on photos is held in place by a rubber band cut from the old bicycle tube. Print with 10perimeters to…
This is a spring tesnsioner mod for the nerf firestrike, it clips onto the plunger. I printed this in PLA with three perimiters. can be printed without supports. the pullback is a bit finnicky but it packs a punch.
This is a printable replacement for the HPI E-Firestorm and Firestorm Servo Saver. You can use it with the original HPI parts like the spring, metal sleeve and nut. It was designed due to the spare parts shortage for HPI models. I printed…
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents. See it in action here: https://youtu.be/n5_aQ29rqwE The blank one can be used with the help…
larger profile case for firestick. got tired of losing the remote control. must be printed in tpu. recommend bright color
Makes reloading a dart a ton easier while also looking cool. Simple and reliable friction fit on to the existing barrel. Can be taken of with a bit of force. The v5 version has a larger diameter than the v4 version, but otherwise is…
For Wekster's Bday we made this diorama to use with the Poolboy mini dude created by Fotis MInt last year. Theres 2 version of this diorama. One with all parts split and one that is all printable in one go.
This was designed to hold a firestick remote, but also holds a roku remote (at least the one I have). Prints well on the bottom without brim or supports. If you print this, a make and a like would be appreciated, as this is my first model…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 2 models: high quality and low poly. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
Remove the battery cover (keep the screw) and screw in the new stock. It may not be a perfect fit, so some cutting with pliers may be needed. Not very practical and kinda short, but still cool. Note: Firestrike laser won't work with…
belt-mounted holster for the N-Strike Elite Firestrike
After failing to find a replacement battery cover for my firestick remote after the latch brock on the original I modeled my own. The specific remote i have was supplied with the Firestick 4k Plus (2nd Gen) which has the back cover end…
Remix to add a firetv remote holder. Remote specifically fits the 4k firestick remote with sound controls.
Wall of back of TV remote holder for a Amazon Firestick.
simple design. It allows you to retain charging and the use of the turbo mode but you hopefully wont have quite as many pocket fires! p.s. Flip the model, I was too lazy to do so Print Settings Printer Brand: Creality Printer: CR-10S…
A straightforward 4k Firestick Wall Mount :)
How to add a Firesensor, Temperaturesensors, Smokesensor & Extinguisher to your 3D-Printer - Complete tutorial The print is not the main thing here, that I have for you. Instead I want to provide an easy to follow tutorial on how to setup…
UPDATE 26/08/24 : STL Version! ------ Here's a niche thing for an already fairly niche thing, a subset of a subset if you will... So you're thinking you want to make your own arcade control panel. You've tracked down the joystick models…
Fireside Haven: A Cozy Retreat in Miniature Step into the charm of Fireside Haven, an HO scale cabin designed for those who seek the warmth of a rustic fireplace in their miniature world. This intricately crafted model features a…
Large, full-height Harbor Freight bin especially for your Firespray. Thanks to Peterslax2 for his help putting this one together! The firespray slides in a little bit diagonally so that the cockpit is roughly at the top of the bin along…
FS9-E Firestarter Ember for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
A 6mm firesteel holder for the basic Morakniv Companion sheath. Recommendations from @vger1981: A firesteel can be held in place by a rubber band cut from the old bicycle tube. Print with 10perimeters to get a rigid piece, PETG…
Firestone logo for office \ workshop
I always wanted to design something with gears, as I think mechanical prints are fascinating. It took a lot of prototypes to get it perfect in every way. But here it is. Attach the spin top. Fire. Challenge your friends for a fun spin.…
Bed Mount Controller Holder for FireStick Modified
The CM 127 Gen 5 as sold by Begadi uses an EFCS (Begadi CORE). Therefore the Fireselector works now with a button. The fireselector in older slides won't connect with this button and therefore won't work. By using this part you can use…
Complete swap out for the alternating pushers inside the Vulcanator. This mod requires no alteration from the original blaster (dremel, snipping). Just remove the gear and pin inside the pusher mechanism and the alternating engager. A…
Printed using PLA with supports “everywhere” using the AnyCubic Slicer. Printed perfect first time in about 7 hours with 20% infill.
Tivo Remote and Firestick Remote Holder Combo Category: 3D Printing
This one fitted nicely on the sheath but i have a cheap Chinese firestarter with a 4,35 mm rod and a 1 mm x 12 mm sawblade style scraper. Made it to fit those. I also made a few other versions for ferrocerium rods with 6, 8 and 10 mm in…
This is (what I call) a 'leveling block' for a NGP (No Ground Plane) Side Mount Firestik CB Antenna. My truck cap (Jason brand) is angled and not straight (up) and so in order for me to mount my antenna so it is level (plumb) and not…
Not quite a remix but an addition, it holds up to 8 of the molds at the same time so you can mass produce them and not have to wait for singular ones. You need 2 of them to hold them properly, it is a bit tight so you might need to add to…
This custom-fit FireStick remote cover was designed using a 3D scan of the original remote. The scan was converted into a solid model, then offset to create a snug protective shell. Button cutouts were added for usability, resulting in a…
Simple firesteel protection for storage in a box.
This is a model of the Firestorm Matrix from the Flash on CW. Check out more of my write up here. https://nerd-sniped.com/works/firestormmatrix
A detailed miniature figurine of a classic municipal building, styled as a traditional firehouse or police station. Rendered in a solid, matte dark grey finish, this charming architectural piece features two large garage bays, a…
Housing to seat 17/32 brass barrel, fits Nerf Firestrike. Used in conjunction with mnorton95's venturi . Intended for sleeper builds with shorter barrels. Print as imported with supports enabled touching the build plate. Simply orient and…
VFL-MK1 (VonFires Laser MK1) This laser is based on a lot of design ideas and because I wanted to build my own one ,Mostly will be used to make pcb’s engrave stuff and maybe one day as a component to a SLS Printer. Its mostly printed with…
Print without support & attache with 2x zip ties + 1x velcro strap
Bed Mount Controller Holder FireStick and one other controller Basic Print settings Supports for holes 3 Shells
A small sign with "Forged in the Fires of Ender" in a LOTR style for above your printer. Just a fun sign, by request. Untested.
A cover for a the Robens Fire Steel magnesium firestarter. The firestarter has the dimensions 8x70mm, so it should fit any similar brands. You will need a piece of string or elastic to fir through the holes on the sides, so that the cover…
Made a batteryplate for my friends car. It will fit for a 5000mah 3s 30c battery. Print instructions Unassociated tags: battery holder, E firestorm, HPI E-Firestorm Category: R/C Vehicles Summary Made a batteryplate for my friends car. It…
This is hanging brackets so you can hang the stovetop firestop over the 3d printer. You need to add a ceiling hook and have some wires to tie both end of the fire extinguisher. (Used fishing wires as it is light and strong) The reason I…
Dual Stovetop Firestop mount Mounting Clip For Cocoon Create and Wanhao i3 I previously created a mount for mounting on the roof, but this may be more convenient for folded metal 3d printer frame. 3D printer Frame Clip [<====y====>] [ ^ ]…
Made these parts for a Nerf DragonPower Fireshot mod, MGK-MSL3. Watch the build video here: https://youtu.be/3py-mhcekac Not much hardware needed for the parts. About 160mm of 10/32 threaded rod and nuts, 50mm of 17/32 brass and 9/16…
📚 Cozy Winter Fireside Reading Bookmark
Forma pro podpalovače z vosku o rozměru kostky 2 x 2 x 2 cm. Doba hoření jedné kostky je cca 8 minut. Podpalovače jsou vhodné pro vodotěsnou krabičku, kam se vejdou 3 kusy (viz odkaz dole) a pro krabičku, kam se vejde 8 ks (viz odkaz).…
This Wall Dispenser It is used to place the remote control on the wall
COMBO LG, FIRESTICK, ROKU, ONN REMOTE HOLDER Category: 3D Printing
🔥 This playful mummy comes alive with a flaming staff, spreading both mischief and magic. Its wide grin and outstretched arms make it a fun yet eerie character for your spooky setup. A perfect mix of scary and whimsical for Halloween…
Sized for the Stanley 014725 25-Removable Compartment Professional Organizer This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cJcu85bPoTY Category: 3D Printing
COMBO LG, FIRESTICK, TIVO REMOTE HOLDER Category: 3D Printing
Mark your page with the warmth of family! This 3D printable accessory captures a cozy, nostalgic indoor scene. Family or children are gathered by a roaring fireplace (with hung stockings) on a winter night, looking out through a large…
I bought a Black & Decker Firestorm table saw from a local seller but it was missing parts. As the saw itself is out of production, most of its parts are as well. I have purchased a few parts where I could but I fabricated this part…
🐈 Fireside Stocking Mantel Bookmark
Created a motor mount, top plate with battery tray. Installed a brushless motor using stock spur gear and a 32P 19T pinion. I printed them using abs-CF for strength. I printed the motor mount on the side for strength. Printing flat makes…
Cestovní krabička na 8 podpalovačů, ideální např. do kempu. Odkazy na vodotěsnou krabičku a formu na výrobu podpalovačů jsou níže. Každý podpalovač hoří cca 8 minut. English: Travel box for 8 fire starters, ideal for camping. Links to the…
Spinning easter egg. The end of the spin is quite different. Use color change in the slicer to make it look nice: https://help.prusa3d.com/article/color-change_1687 Get the launcher here:
This will keep four firestick remote from being lost in the cushions. It holds an Apple Airtag that can be used to locate your remote. It just slips on and will stay on! You are free to remix and share! Category: Organization
A stacking board game for 2–4 players where everything on the table is printed: one hexagonal plate, 36 rings, 4 hills. No dice, no cards, no text. ▶ Watch it explained and played — 10 minutes: https://youtu.be/ThitDa0DtpY Nineteen posts…
Remove the battery cover (keep the screw) and screw in the new stock. It may not be a perfect fit, so some cutting with pliers may be needed. Not very practical and kinda short, but still cool. Note: Firestrike laser won't work with…
This one fitted nicely on the sheath but i have a cheap Chinese firestarter with a 4,35 mm rod and a 1 mm x 12 mm sawblade style scraper. Made it to fit those. I also made a few other versions for ferrocerium rods with 6, 8 and 10 mm in…
Forma pro podpalovače z vosku o rozměru kostky 2 x 2 x 2 cm. Doba hoření jedné kostky je cca 8 minut. Podpalovače jsou vhodné pro vodotěsnou krabičku, kam se vejdou 3 kusy (viz odkaz dole) a pro krabičku, kam se vejde 8 ks (viz odkaz).…
A 6mm firesteel holder for the basic Morakniv Companion sheath. Recommendations from @vger1981: A firesteel can be held in place by a rubber band cut from the old bicycle tube. Print with 10perimeters to get a rigid piece, PETG…
After failing to find a replacement battery cover for my firestick remote after the latch brock on the original I modeled my own. The specific remote i have was supplied with the Firestick 4k Plus (2nd Gen) which has the back cover end…
Discover the ultimate solution to keeping your Fire-stick remote safe and easily accessible with my 3D-printed Fire-stick Remote Holder. Designed with precision to snugly cradle your remote, this sleek and practical gadget ensures your…
The original relies on an external mold to make the firestarters first before putting them into the container. This one is intended to do away with the plunger and mold. To use: Print 1 body and 2 lids. Screw 1 lid onto the bottom (the…
Check out the original model for the full details and the other parts! <3
