Counting matching models…
A two-piece corner clamp designed to help keep your fitted sheet from slipping off the mattress. The base sits against the mattress corner, underneath the fitted sheet. Pull the sheet over the base, then fit the outer clip to hold the…
Fitted sheets folds over the corners of a mattress, held in place by elastic. But sometimes they slip up, releasing from under the mattress. Additional elastic is required to keep the corners put. I tried…
Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
NASA fabric that fills a Prusa MK4 buildplate
The rugged box, itself, is a remix of - https://www.thingiverse.com/thing:4757317 I printed the yellow "inserts" with TPU to keep it from marring the GoPro. The top of the box was printed at 100% infill with PETG. The bottom of the box…
This is a hook to hold a single hat on the wall. It was designed with fitted baseball caps in mind, but it's equally useful for adjustable caps, beanies and other hats. Plus, anything else really. It gets stuck to the wall with a single…
Hello, This accessory prevents the sheets from coming loose, and the tabs keep them securely in place. It's sturdier than the basic model and not as high. the supports are already in the model Thank you for your feedback.
These are storage trays for the new edition boxes of the board game Arkham Horror LCG. Most of the trays are narrow and the same width as the token storage boxes designed by olivvybee…
Hello everyone, Here is my C920 camera mod, please follow the disasembly guide below to remove the current mount off the camera. Please keep the 4 bottom screws from the mount as you will need them for my mod. Instructions For Disassembly…
Friction fitted Magwell for hi capa airsoft gun
I modified the model to fix the problem with the oval hinges. You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
This is designed to hold a 28BYJ stepper motor in place to rotate the worm gear driver found in most household blinds. There are other projects which mount a motor in a 2" track and drive the rod directly. My blinds are a 1" track and…
Cutting template for making cloth sewn face masks. Instructions at Hacktastic: https://mathgrrl.com/hacktastic/2020/07/fitted-face-mask/ Print instructions Cutting template for making cloth sewn face masks. Instructions at Hacktastic:…
Looking at all the other ammo boxes around I did not find anything I liked. Either they used square holes, limiting how much they held, or they were an odd size that didn't fit my ammo cans... So I just made my own. I targeted the 3 types…
Needed some new lampshades for 2.5" lip-fitter pendant lamps. Print upside down, be mindful your overhangs for the first few layers. Insert color changes for added fun!
Its a box to catch plastic waste. Insert 2 magnets into the slots. put 2 more on the outside of the box and attach foam tape to those magnets. Gently push against the side of the printer to align the mounting magnets. Includes design file.
Remix of this silencer but including slots to hook a badge holder so that your silencer doesn't take off on you.
This variation is exactly the same size as a standard 80mm fan to appear flush when mounted directly to fan. Low profile
Odell Creations presents the Paint Carousel designed to fit 12, 24, or 36 Apple Barrel acrylic water paint containers or similar bottles. Each tray holds 12 containers. You have the option of just printing a two tier or a three tier or…
I adjusted the Originalmodell V2 so it fits on a Bambu P1/X1
This is a custom fitted 2-piece shelf that I use for my personal homelab. Feel free to use it or modify it if you have similar setups as mine: The lower shelf features a drawer for storing cables/accessories, it is designed to fit a 4-bay…
0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors). I apply these gear wheels for focuser & rotator control of telescopes via ONSTEP ASCOM driver. One M4 flat-head (8mm in length) screw is…
https://www.youtube.com/@Wild190cart If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly…
This is a remix of a 5015 fitted Satsana Remix
This is designed to work with the TZe tape organizers from ICT Avatar's model here - Modular P-Touch TZe Tape/Cassette Holder organizer rack This is a simple shelf that attaches to standard US size pegboard but might work with different…
2 versions, one for the standard installation and one for a second spool in the right back or front left. The original spool holder arm just has to be mirrored to fit. Quickly made up in Tinkercad, feel free to modify yourself:…
Its a holder for magic wands, fitted to an older IKEA shelf. I know, thats not quite universal. But the required changes in thickness and hole distance are easy to make. The bottom part has two sides. The one with the center hole is for…
A Gimbal protector fitted to the Qx7, I've lost a few and I thought it would be a good item to do while trying out a new cad program for the first time. The ones in the photos are not 3d printed but they are what this model is based on.
Its a holder for lightsabers, fitted to an older IKEA shelf. I know, thats not quite universal. But the required changes in thickness and hole distance are easy to make. The bottom holder is very sturdy and holds heavy sabers with…
This is to attach the H2V2S mount to the MAD fan system.
An ESP32 Cam mount for the Prusa Mini. The mount fits on the X axis over the motor so as to move the camera in line with the layers as the printer prints. I designed this after finding other models didn't mesh with the modifications I had…
Each hole is 16.5mm across. I found that, on average, each Burt's Bees was 15.88mm to 16.35mm from a sample size of 40 tubes. Of these 40, there was one significantly greater at 17.33, With this information, this should fit the majority…
convert your chevy shift knob to from fitted to modular screw on. stick thread 16mm must be TPU
If you use one of the many filament clips that attach to Bambu spools, and want to use the spools on an Ender 3 (or other bed-slinger) printer, then this little adapter may be of use to you. I did not expect that the clip I have been…
I like to cover unused spots and when I saw @DaHouzKat's “Advanced Filtration System Adjustable Exhaust” I thought the mounting plate model would make a great cover or gasket. And it did!
https://www.dropbox.com/scl/fi/2ww611knefv24lxs8k7zz/example-of-both-lids.mp4?rlkey=2d20vxtzsfbiueqn7opoq62fm&dl=0 The lid was too loose for my liking. When I pulled the toilet paper through the lid would come off so I tightened up the…
This is a model i made long ago to replace a broken slider bracket on an integrated fitted fridge freezer door. I hope it's useful. I printed originally in PLA .4mm nozzle and was fine The posted image is in PLA .2mm nozzle Recommended…
This is a 3D printable toy, the front wheels actuates the head and the back shaft can be configured to actuate the tail. it is possible to attach 4 N20 geared DC motors to the unit or two plane shafts can be used for the wheels. In my…
After looking through many dryboxes, I finally decided to mix and match models to create the perfect drybox for me! I chose models for the drybox where the parts can be found and bought on Indonesian online shop (Shopee). For the print…
Made this one as an afterthought for additional nozzle storage towards the rear of the shelf.
A parametric design tool which will allow one to design fitted boxes which may optionally have dividers. A system for generating a cut list and SVG files using lualatex and METAPOST is under development, see:…
I made a remix of the original to fit my printer. My building plate is 20x20x20 so I needed to split the large pieces. I split the holders of God and large guardian figures into individuals holders. Since I also have the Guardians set…
Print settings:1 Use PETG or ABS 2% 15% filling Object 3 0.2mm layer height If you enjoy appreciating it, please support and follow me The use of this model for commercial and other profit-making activities is prohibited and violators…
I made some custom wing servo covers for the 3dLabPrint Hawker Hurricane. These are most useful for the version of the plane for belly landings. Hopefully they will protect the aileron and servo horns. They are made in LWPLA but in a…
I made this to press fit close the snowball press instead of the other thing, (This might need to be put in a wrench for press fitting) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2…
This part is more of a temporary solution for myself and is meant more as an inspiration for an improved design. Installation is as follows: install manometer with the fixed capillary tube inside the machine route the capillary tube to…
a center cap for a marine steering wheel
I had a "Time Machine" rolling ball clock for many years however the PCB board had too many issues and I didn't want to purchase a new clock. I bought a 1rpm clock motor and designed and 3D printed a bracket to hold the motor onto the…
Make a bookcase that fits your dollhouse perfectly. Set the size, choose your scale, and the generator builds it, with board thicknesses tuned to your nozzle so the small scales still print cleanly. Ready-made STLs Don’t want to…
What’s changed: 3x 18650 instead of 2x: The case has been enlarged so three 18650 cells without batteryholder fit inside, for significantly longer runtime off-grid. Adapted button: Due to the larger case, the original button no longer sat…
a prototype for a project of a simple 3d printed practice french horn kit which will be a simple less than 200 g print in which vinyl piping is fitting a 3d printed chunk valve and key mechanism in which just piping is fitted and strapped…
Looking at all the other ammo boxes around I did not find anything I liked. Either they used square holes, limiting how much they held, or they were an odd size that didn't fit my ammo cans... So I just made my own. I targeted the 3 types…
This is a model i made long ago to replace a broken slider bracket on an integrated fitted fridge freezer door. I hope it's useful. I printed originally in PLA .4mm nozzle and was fine The posted image is in PLA .2mm nozzle Recommended…
Remix of this silencer but including slots to hook a badge holder so that your silencer doesn't take off on you.
Templates for sewing fitted face masks. Comes in three sizes. How-to videos for sewing: Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3mm Filament: Any PLA Category: Accessories
Printed with supports, .8 nozzle in PLA. I'm sure there would be absolutely no issue printing this with .4 nozzle
This is a simple form-fitted case for your Google TV device, I was tired of carrying it around in a mess of cables and decided to put an end to that. The model consists of three items: a top, a middle and a bottom part. The top and middle…
Honda groms have one problem in my eyes, THEY DON'T HOLD MONSTER ENERGY CANS ON EITHER SIDE. This model remedies it, you'll need 2 m8x35 screws just like the original can clip but I widened the opening slightly so more various sizes can…
This is a remix of https://www.thingiverse.com/thing:1547126 Dial indicator case. It includes the modification for the harbor freight indicator and I added a modification to support the Amazon Exclusive 1" Brass Premium Dial Indicator. I…
I couldn't find the shelf I wanted to fit the top rail of my printer, so I designed this one using TinkerCAD . I dropped in the tube/inset sized to fit the glue sticks I use.
Kingroon KP3S - X Belt Tensioner for a commercial aluminum tensioner from amazon
Some task from my wife to design fitted flower pot to her special flower stand. Simple and fast project - Satisfaction wife - prizeless: D
