Ender 3 Filament Guide when using Bambu Spools with Clip Fitted
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small accessory to stop filament jamming when using Bambu Reusable Spools that have a filament clip attached.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you use one of the many filament clips that attach to Bambu spools, and want to use the spools on an Ender 3 (or other bed-slinger) printer, then this little adapter may be of use to you.
I did not expect that the clip I have been using on the reusable spools would have caused a problem on the Ender 3. I came to check on a print on my Ender 3 only to find that the filament had jammed under the clip (which I didn't think could happen). The Ender 3 tried to keep printing with the filament as tight as a guitar string (obviously the print failed).
My solution, make a simple removable adapter to clip onto the top rail of the bed-slinger. It can be positioned anywhere on the top rail and is simple to remove. I have decided to use it for my non-Bambu spools as well.
Printed versions in PLA and PETG - both worked well.