121 models
Comes with 2 variants - standard or keychain Fully print in place with no brim (printers with low adhesion may require a small support under the beak only) Highly flexible but can stand on his feet
The Flexi Flamingo is a charming and interactive model that consists of a series of interlocking parts, designed to mimic the graceful shape of a flamingo. Once assembled, the flamingo's body can be bent and posed thanks to its…
May need to scale down a bit. The image is about 15% scale
A graceful little flamingo with a smooth curved neck, rounded body, and simple stick-like legs. Its beak is softly stylized, and dot eyes add a gentle, calm expression. With a clean silhouette and subtle 3D printed texture, this flamingo…
Flamingo Bookmark, or for any other flamingo needs. The pictured Flamingo was printed at 90% scale Category: 2D Art
One piece Best way to call Don Quichotte Doflamingo
A new 3D figurine generated by AI, a pink flamingo. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
The tele snail from Donquixote Doflamingo from One Piece! Size: 13cm (1:1)
Embosser for paper and cardboard with hearts, Rose, Bird, Hummingbird, Swallow, Seagull, Flamingo, Dolphin, Seahorse, Angelfish, Cheetah, Clover, Infinity symbol Try version V2 with 0.3mm clearance if the hinge sticks. Hinge system…
A few "beads" to make necklaces or bracelets or something like this. Owl Unicorn Flamingo Butterfly
Flamingo Cookie cutter ~10 cm height Printed 0,2 mm layer Pay attention to the legs when you cut the dough (need some care).
This is a cool model that I found on Sketchfab from RISD Nature Lab. This model is easy to print. Just follow these quick tips and you should have no troubles printing. Make sure that the model is printed in the same orientation as given…
Flamingo Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This design will need supports and should be scalable to most sizes.
Step in to your own oasis! Print instructions I printed with PLA with a color change at 2.3mm. I used green for the base and pink for the top layer. Check out the Thingiverse link at: https://www.thingiverse.com/thing:4279375
Because flamingos have long legs, they can wade into much deeper water than most other birds . Webbed feet support them on soft mud. When the water is beyond their wading depth, flamingos swim at the surface while feeding. Webbed feet…
It works, but make sure you use a bit thicker dough for this one.
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position. The flamingo…
A shopping cart coin with a cool flamingo on it. It is made to fit shopping carts, that work with 1€/50ct coins. Multi color printing To print the coin multi colored, you can use a printer that supports multiple filaments at once or you…
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
I made this one shaped like a flamingo
As I wanted a larger flamingo than my build plate accommodated, I cut the model in 3 parts and added little tabs for alignment and glueing. The resulting height is about 45cm. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
I recommend printing with organic supports with a minimum fill of 25%
I designed this keychain myself so feel free to download, print and sell, but please mention me when you make this and, if you fell like, donate as well! Good printing!!! Category: Accessories
I made this, along with the strawberry model I made for a family member a few months back. Just a neat addition for someone's letterboard! I printed this with 0.12mm layer height (0.16mm should also work fine) with no supports needed. In…
This is an stylish flamingo led lamp. The flamingo part can be fitted with an led strip, its hollow and consist's in 2 parts. With a little crazyglue at certain spots it fits togheter perfectly. In the base you can put the electronics.…
Have you ever thought to yourself that your plant looks a little lonely? Maybe that dead plant you sitting in the corner could use a pop of color to hide the dead leaves and brown stem. The solution? A miniature flamingo! Inspired by…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring a splash of tropical charm to your collection with…
It starts off with pink then goes to white then to black then finally blue.
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
What is it ? It's a goose that has a body like a flamingo. Print settings : Scale : This is up to you, but be careful not to print it too small because then the details might not be visible well. Layer height : This is up to you as well,…
fp-5 flamingo missile Dana 1 (Dana Drábová)
Elegant flamingo in one-leg pose, simplified geometry with decorative appeal.
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Flamingo is designed in a faceted geometric…
Great little keycharm to impress. This is a very quick and straightforward print. Great way to consume the last meters of your roll of filament. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long…
Please like and download. More wall art on my profile.
This sassy flamingo keychain is ready to flock around with you wherever you go! It's the perfect accessory for anyone who loves a touch of fun and a pop of color. Plus, it's sure to keep your keys from getting lost in the jungle of your…
Druckeinstellungen PLA Füllung 10% Schichthöhe 0,3mm mit Stützen, ohne Rand (Augen und Schnabel habe ich von Hand angemalt, da die bestellte MMU3 noch nicht eingetroffen ist)
The original model by mishkin2 in this link has been slightly modified to compensate for a few weak points. Printed for gifting (as a wall decoration). 3D Printer: Elegoo Neptune 3 Pro Filament: Porima PETG Black Nozzle: 0.4mm Slicer:…
This 3D-printed pink flamingo isn’t just a decorative piece—it’s designed to hold a roll of toilet paper, combining function and personality. The flamingo stands on a sturdy black base and was printed in separate pieces to allow for easy…
Was bored on a Sunday morning and came up with this hanger. If you print this and like it please post your makes and any ideas to improve this design is very welcome. Thanks :) UPDATED VERSION!
It's a FLAMINGO! Set the same scale for every element ;]
This is my first CAD model/project and im very excited for those of you who do decide to print this. I personally can say I've lost a lot of bookmarks, and with this model i know i can get a chapter or two in while this prints!
Copy/Paste from Thingiverse If you ever wanted a 3D printable Pink Flamingo, here it is! Designed as a table center piece for a birthday event. Came out pretty well, so I thought I'd share. Enjoy! FACT. Apparently there are more plastic…
Flamingo from photo found online. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Inland Black Transmission Distance: 0.3 PLA Polar Candy Red Transmission Distance: 4 PLA Inland Pink…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
This is a model of an Ukrainian Flamingo FP5 Cruise Missile. The geometry has been slightly adapted for supportless printing. You can choose from 2 printing options. Use the full model to print in 1 piece with supports. Use the 3-part…
A great Wall Art of a pink flamingo. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
Do you have a special someone who likes Flamingos a lot? Say No more! The Flamingo Head is now mountable on the Wall! The original Model was KI-generated, the changes were not. You can either Print the Full model or the three Parts…
Other keychains can be found here: https://www.printables.com/@Wonter_1354734/models Printed on Ender 3 pro Drawing software: Inventor Autodesk 3D-Print slicer: Creality Slicer
Designed a print in place adapter to use a high quality flamingo razor handle with the lots of schick hydro silk blades we had. No supports necessary. printed at a 0.16 layer height for better finish. Print Settings Printer Brand:…
The model requires by default an 1x8mm magnet but you can change this easily in the provided fusion file. You can always secure the magnet in place with a little bit of glue but it should be a press fit. Printing Information: Print it on…
Have fun with this low poly flamingo! Check out my profile for more low poly animals.
I wanted to make a remix of the base model but had to make this version of the model first. I figured it might be interesting for others to have it already done. You can print the model and its symmetry to obtain a complete flamingo by…
One Piece - Donquixote Doflamingo
This is my Flamingoid. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . Character concept art by SheTheTDE If you like…
I printed a few of the original flamingos as table decorations for a birthday party my wife was coordinating at work. The model will not stand by itself (note, it was never stated that it would). This base will snap into place with the…
Set the perfect mood at home with this sleek 3D printable flamingo model, designed to glow like a neon sign when wrapped with LEDs. This compact design is easy to print and can be mounted on the wall using adhesive or a nail. Simple and…
Thank you for checking these out. I tried for a long time to find a model of these. so i created this model using photogrammetry from a set of original featherstone flamingos made by Union Plastic. You will notice they are not perfect.…
Add a Splash of Color and Elegance to Your Scouting Gear
Transform your space with this stunning flamingo 3D print that captures the graceful elegance of one of nature's most iconic birds. This detailed STL model showcases the flamingo's distinctive curved neck and serene pose, making it…
Hey Scouts! Check out this unique neckerchief slide designed in the shape of a 2D flamingo, in honor of the beloved Marala. This design was created at the request of Martijn van Dijk (@MartijnvanDi_1837562), and it’s sure to bring a touch…
Add a fun tropical accent to your drinks setup with this Flamingo Can Holder , 3D printed in matte plastic and designed in a playful pink flamingo shape with a curved neck, beak detail, and built-in handle. Made to fit 300 ml cans , it…
this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
to put the Body in form use heat gun or hot water. For the axel use a 2mm rod fixe rod with super glue
this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
[Commercial license access is now provided for this model at Thangs dot com/designer/tlavedas1] This is a three-part HueForge Lithophane of a Flamingo in a stained-glass style. The first part has the blues and greens of the foreground…
This flamingo keychain features a simple yet attractive silhouette, capturing the elegance and distinct profile of a flamingo. The use of pink and black contrasts enhances visibility and aesthetics. Purpose Designed as a stylish and…
this is a coin that is used to take a cart if there is no coin
Prints 3 0.2mm layers for light to shine through the colored area and 3 more 0.2mm layers for the outline.
Model is prepared for Bambu Lab printers. Print and have fun.
The model requires by default an 1x8mm magnet but you can change this easily in the provided fusion file. You can always secure the magnet in place with a little bit of glue but it should be a press fit. Note that if you want to obtain…
This is a head base that can be used to build a puppet-, plushie- or robot-head. I included some parts in the mesh that are only needed for a hand puppet (like the surface at the top of the lower beak). If you scale it up it could be used…
This is a 3d scan from one that I purchased for my wife.
While playing Gartic Phone, a friend of mine drew what he described as being a flamingo. It was not a flamingo, but it became a great in-joke. As a gift, I modeled Not-A-Flamingo in Blender and printed it – and now you can too! Printing…
Bring a vibrant, tropical vibe to your space with this 3D printable flamingo model, designed to glow like a neon sign when wrapped with LEDs. Perfect for setting the mood at home, this striking piece can be mounted on the wall using…
Skizz's interpretation of a flaming from the youtube series "Guess the build".
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
I need an holder for my Nooelec Flamingo (FM filter) and LaNA (LNA) and I want to use Grifinty system from Zack Freedman! So I made it! Magnet are friction-fit, it could be too tight… If needed I could upload standard 6.5mm hole for…
Turn your gaming corner into something unforgettable with this playful flamingo controller holder. Designed to bring both function and style, it holds your controller securely while adding a bold, tropical accent to your desk or shelf.…
✨ Welcome to Phixfeiss A creative mix of 3D models made for people who enjoy printing something fun, unique, and different. Here you’ll find a variety of designs — from figures and props to keychains, decorations, fan-inspired models, and…
(sale of the entire set upon request) This model is designed for further model modification after printing. Included: • A one-piece hull in actual size, for self-preparation for printing • A 1:50 scale hull cutout (final length - 424 mm)…
Ein dreifarbig gedruckter Flamingo-Anstecker mit beweglichen Beinen. Zwischen den beiden Schalen ist eine Sicherheitsnadel eingebaut. Die beiden Schalen sind miteinander verklebt. A three-color printed flamingo pin with movable legs. A…
Designed for multi material (MMU) printers. Discover more of our incredible designs: https://StarLabs3D.com See our design process in action: https://www.youtube.com/@StarLabs3D
Flamingo Cover für das Handy CMF Phone 2 Pro https://de.nothing.tech/pages/cmf-phone-2-pro https://de.nothing.tech/pages
![[for test printing] Project 1415 Flamingo type motorboat hull for 3D printing and customization, version 1.0](https://media.printables.com/media/prints/a3cfaf12-ca2a-4764-b593-61ba72ea9356/images/11141636_ada29b9c-f262-4ed7-ba78-89e2b2b0baec_975fca58-19af-4ab1-bbd0-008837fa6883/1415-hullstl.png)
