Counting matching models…
OpenFormicaria A Open Source modular ant formicarium and home with simple space saving connectors. Updates/Changelog 2020.11.02 Added 6xGateway More space or broader attachement to other modules! 2020.11.01 Small fixes Added Connector…
My Messor barbarus ant colony was growing very fast, and I was housing them in several small formicaria, so I decided to make an extra large formicarium for them. Once I connected the new nest, they quickly started exploring it and after…
modular ant farm infinite combinations Note - All of the tops may need a bit of sanding to fit right, Tube Adaptors - I may move these at a later time, but for now they are part of this. these are for 3/8 tubing(I said 1/4 inch before, I…
My take on the modular ant farm system, smaller than others because i am growing Lasius niger colony. I used these test tubes: https://s.click.aliexpress.com/e/_Dl55U1N Category: Biology
Id like to be able to expand my nest without any tubes whenever i need to and id like it one day to be very big. Problem is i have a small printer. Well that is why i made this. Small form factor modules that connect to each other. The…
🐜 Upcycled PET Bottle Formicarium Core Turn a standard 2L soda PET bottle into an interactive, professional-looking Ant Farm (Formicarium)! This 3D-printed nest insert is designed to fit inside a cut 2L Coca-Cola PET bottle, transforming…
This is a mini formicarium for a starting colony which is still in the test tube. The connection is for a 14/10mm hose. All you need is some cotton, a 16mm test tube for water and a Pringles lid. The lid fits pretty tight to prevent ants…
Modular Formicarium - Ant Farm
I started my adventure with ants this week, and I loved the idea of Test Tube nest from Wakooshi, so I designed similar nest compatible with OpenFormicaria. Dimensions: Entire Module: 210 x 70 x 20mm Arena Internal: 64 x 41 mm Compatible…
Hallo Ameisenjunkie, willkommen zu meinem Projekt, dem Little Formicarium. Angelehnt an mein erstes Projekt gibt es hier ein Formicarium, welches nach Belieben erweitert werden kann. Dies wird durch die modulare Bauart erreicht. Neue…
Ant Arena for the OpenFormicaria Project Size M Plexiglass sizing The glass cutout is 98mm x 97mm.
Demo: Here's a new connection method I'm working on for formicarium modules. These modules will be 3/4 to 1 turn screw on to connect modules. There will be a nub at the top of the screw to align and lock the modules when screwed together.…
This is a Lid mini formicarium (nest for ants). My research project to find the best design ants nest... Lid Ferrero Rocher box / dimensions: 3.1 x 5.8 x 2.8 inches / 77 x 144 x 72 mm. 3D model mini formicarium available in >> my shop <<…
Simple supports for your Test Tubes while attached to your formicarium available in 15mm and 20mm centerline height.
Formicarium for ants. Fits a 16mm test tube. The glass is from a 10x15 inspire LILA photo frame, available at Leroy Merlin. You need a few m3 screws
ABS Formicarium for small species Print Settings Supports: No Category: Animals
Step 1: Print the files You need 4 of part 4 and 1 of the water tower. If you are starting with one module, you need 3 plugs and 1 connector. (or no connector if you use vinyl tubing to connect to the outworld; if you are, use 10mm OD…
Lamp Holder for Terrariums and Formicariums Description: This adjustable lamp holder is designed specifically for use with terrariums and formicariums, offering a flexible lighting solution for your setup. The design features a sturdy…
Formicarium / Ant enclosure The formicarium is made for a tube size of 16.3mm ! Lid dimensions: 96,4x67,8x2 mm For the complete assembly of the formicarium, a magnetic tape of 2 mm is needed (depending on how thick you use the glass) and…
This is a test-tube holder modular mini formicarium (nest for ants). My project to find the best design ants nest... Model test-tube holder (d:17-18 mm.) Full 3D model formicarium available >> in my shop << now... See creation blog:…
OpenFormicaria medium for Messor
Bulkhead for my formicarium for 11mm tube Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,12 Infill: 10% Category: Hobby
A fully 3D printable formicarium (ant nest) that expands to grow with your colony. This project is described in full here: https://youtu.be/kuLnrrM9C5c Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: varies Filament: X3D PLA…
Added a draft to the of_portal_feederlid to aid alignment and keep the lids in place.
This is a set of useful parts that I use when the size of the current formicarium is not sufficient anymore. It is designed for 160mm x 16mm test tubes and tubing with 14mm outer diameter. Entrance The entrance part has open holes for the…
poner una tapa de cristal TRANSPARENTE arriba cerrada solo con algunos respiraderos separados de los costados para que las hormigas no se escapen. si necesita agregar alguna cosa es facil de editar en tinkercad, se llama “granja de…
Karl132's Original Model Original test tube connectors were designed for a 12mm test tube, so I tried my hand at altering it to hold a 16mm tube. Currently untested, will be printing soon to see if it works out or needs any additional…
CV2 16mm Connector to connect to other stuff via tube Print in TPU or similar flexible material
This is a formicarium, or an ant farm. This particular project was a test to see if it was possible to make a 45° angled nest. Everything is printable apart for the acrylic glass which is 2.5mm thick. You can link this nest to other nest…
🐜 Upcycled PET Bottle Formicarium Core (Ant Head Edition) Transform a standard 2L PET bottle into an interactive, 360-degree educational Ant Farm! This updated version features a fun, custom Ant Head Top Cap that serves as both a…
General Overview: This 3D model is a modular formicarium expansion, measuring 10x10cm, compatible with existing setups. It features three access points and serves purposes such as separate feeding areas or isolation chambers. Assembly…
This structure adds chambers and pathways to your 100x50mm formicarium, enabling your ant colony to properly adapt to and partition the space. The maze is 20mm tall and meant to be used with this formicarium…
A heat cable holder for my 200mm formicarium.
I have created this model for your ants. The hole for the tube is 12mm. The gradient is about 30 degrees , so it's easy for the ants to overcome. Printing time at 150mm/s about 1 hour. Happy printing!
i made this 3d model and i am really proud of it :) you need one hole for a test tube with water you can use the cover to give the ants darkness you need to add an acrylic plate (or plexiglass plate) on the roof ⚠warning!⚠ i haven't print…
Modular ant farm - formicarium for beginner colony. As a material I used PLA and it worked great. Features: The rectangular cavity inside the model serves as a water reservoir. You can either insert a water-soaked sponge to provide a…
My own take on a formicarium out of the 3d printer and would like some input, inspired by https://www.printables.com/model/628724-ameisennest building and printing instructions: uses standard microscope slides as lids for the…
this design was to be supported with the OpenFormicarium project on thingverese. designed for larger ants
es un formicarium (hormiguero), redondo con sistema de humedad centralizado
It is just the founding nest that came with an outworld originally, but I separated it so we can use it as the replacement for test-tubes. You should fill the watering chamber with cotton wool. It does not have any issues with…
Remixed simply to replace the block style connector with a twist style connector, compatible with my other formicarium modules. See compatible Twist modules here: https://www.thingiverse.com/thing:4058633 Demo: Print Settings Printer:…
This ant food dish has a slot for the proteins, sugar liquid, and the water. I left a fourth slot open so it is easy to grab with tweezers and prevents the tweezers from getting messy, or it can just be used as an extra food slot.
The hole for E27 socket has a diameter of 41mm and a height of 15mm. Used Material: PLA Example Formicarium:…
Desigend for https://www.amazon.de/dp/B0044MTK5G?ref=ppx_yo2ov_dt_b_fed_asin_title&th= and…
Add 3 PMMA tubes to get a cool new ant home.
This is the connector to turn the Ant formicarium into 15mm, I did this so that I wouldn't break the formicarium and force something into it, and would instead break the connector if needed. This should be ant proof, as I've been using it…
This is the connector to turn the Ant formicarium into 15mm, I did this so that I wouldn't break the formicarium and force something into it, and would instead break the connector if needed. This should be ant proof, as I've been using it…
A parametric OpenSCAD remake of the modular ant housing platform OpenFormicaria. It is inspired by the original project by Schemen and is not an official part of it. You get one script with Customizer support. Set the size, switch…
Another tube connector for OpenFormicaria. If you want a tube connector for another dimension that hasnt been modeled, then you can head over to https://github.com/schemen/OpenFormicaria and download a FreeCAD file to modify. You can also…
This Modular ant formicarium part was inspired by “Lab Ants.” See link below. It uses ⅜” tubing for connections and can be placed on a Gridfinity base. Windows are made using 1” x 3” microscope slides. Links below. Three different…
I made an enclosure for a larger ant colony (for starting one, please use sth smaller!) Instructions Use an acrylic sheet for the front panel (either red or clear with red window screen => ants can't see red, you can => you can see ants…
es un formicarium (hormiguero), redondo con sistema de humedad centralizado
Desigend for https://www.amazon.de/dp/B0044MTK5G?ref=ppx_yo2ov_dt_b_fed_asin_title&th= and…
this is a model I made it inspired by ant nest by esthetic ants but its not a copy but still chek out his website so to make this model u need to change mesh settings in per model settings and make top and bottom layer 0 and infill 65 and…
My Messor barbarus ant colony was growing very fast, and I was housing them in several small formicaria, so I decided to make an extra large formicarium for them. Once I connected the new nest, they quickly started exploring it and after…
hormiguero para especies de hormigas grandes, como camponotus, pogonomirmex, etc. sistema de humedad lateral para usar con esponja de pva. y 2 conexiones traseras 1 modelo 2 pisos de 15cm de largo 1 modelo 2 pisos de 20 cm de largo 1…
this is a model I made it inspired by ant nest by esthetic ants but its not a copy but still chek out his website so to make this model u need to change mesh settings in per model settings and make top and bottom layer 0 and infill 65 and…
![formicarium BetterForm [BF7] mini DIY lid Ferrero Rocher box](https://media.printables.com/media/prints/56943/images/564834_a8075420-5f70-481f-8423-d32aa42d2a2a/large_display_5211_56943.jpg)
