Counting matching models…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
It's like a desktop zen rock garden, but with water! https://youtu.be/dAKaOwgOqy0 Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the base with extra perimeters and a high…
I love everything about the Dummy 13. I am an official fanboy. So when I discovered about the Dummy 13, I decided to build expansion kits for this awesome model. I will not say my models are an upgrade kit because the Dummy 13 is the OG.…
I wanted to cool down my pool water overnight and have a waterfall for fun (and water sound :)) during the day or night. I wanted to create a pool fountain that satisfies the following: can easily be plugged into an existing pump hose…
🔥 Cover up that boring lighter! 🔥 Always have a flame on hand with four different styles to match your vibe or your mood! If you don't want to add a lighter to your janitor-sized wad of keys, then I have just the thing for you! I have…
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
Bring the mighty Tairn to life with this Funko-inspired dragon figurine from Rebecca Yarros’ Fourth Wing. Designed in an adorable yet fierce style, this collectible features Tairn’s iconic dark scales, golden details, and powerful wings.…
There are three variants of this bookmark; one .3mf file for printing with an AMS/Multimaterial system, one with Andarna raised up, allowing for a color-swap, and one with Andarna cut-out for a single-color only print. Tairn's tail can be…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
I designed this basic Fountain that can be screwed on the ejection hole of your Intex swimming pool... It is working great for me at the moment. I printed it in ABS but PETG or PLA would work just fine
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
🐾 Four Cats Wall Decoration Bring a touch of playful charm to your home with this silhouette-style wall art featuring four whimsical cats sitting side by side. Each feline has its own personality — from curious tails to expressive eyes —…
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
Fourth wing dragon earrings I designed. .2mm Nozzle needed for detail of the second dragon. Print pauses so the filament can be swapped out manually. I also printed this on the rainbow PEY plate so the back can be nice and sparkly too.…
Imán personalizado de los dragones de la protagonista de Alas de Sangre de Rebecca Yarros. Se necesitan 3 imanes de 8mmX1mm que están posicionados uno en cada ala y uno en la terminación de la cola del dragón. Diseño realizado a partir de…
Just adapted the four arm mod to the Type-F frame. It also uses my pinned clavicle mod.
This base has 12mm taller outer walls and a 6mm deeper basin. Add stackable spacers to raise sections of of the fountain for more vertically interesting layouts. https://youtu.be/dAKaOwgOqy0 https://youtu.be/3PsxrwF2fdY Printing All parts…
I have fond childhood memories of eating Bomb Pops with my family at our Fourth of July celebrations. I hope these strike up a warm and fuzzy nostalgic feeling for you as well. The earrings on the left are the standard size model and…
Here's a Power 4 game with spiral pieces that I designed in Fusion 360 (step and f3d files supplied). The base is magnetized to the board. Tip 1. I suggest you print the tray test piece and a piece to check tolerances and set your…
Show off your favorite pens while keeping them within reach! This is a 4x2x3 Gridfinity display case for 4 fountain pens. It also works for ballpoint pens, pencils, small screwdrivers, and similar implements. If you need a smaller case,…
Four leaf clover keychain to celebrate St. Patrick's day. Scale however you wish.
This modern holder is ideal for makeup brushes, as well as pens, brushes, and other office supplies. It's versatile, making it ideal for a variety of uses. With its four compartments, it offers plenty of space for your essentials. The…
This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.
An artistic fountain. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or download, please "Like". This one requires a large printer if…
This is a remix of the Splash guard for 3D Printy's Modular Desktop Fountain . I noticed that when water splashed onto the original splash guard, the water would trickle down the splash guard, between the guard and the base, and outside…
Hi, this is a pool fountain you can plug into your pool outlet. You can change nozzles as you want, thread is M30x3 Video: Note #1: It is ment to plug into outlet hole with plastic that is left when outlet guard breaks of sun. Note #2:…
This helps to make the waterflow a bit stronger and have less water running just along the sides. It should fit tight, so there is no glue needed - and so they are changeable if you want another color
Update 25.06.2023: 3 models added I also had tried different cutouts in order to save some filemant. Therefore I had created three different models: The first one has larger cutouts for faster to printing (3 hours instead of 4). It has…
Turn your faucet into a water fountain by just putting this under to change the water flow. See more at: Instagram: @3DBrooklyn Facebook: 3DBrooklyn Category: Bathroom
its a four pin connector used to connect four honey comb pads
Les parties ont été assemblées avec de la colle PVC pour le tuyau, coude et la rallonge (la rallonge est en option selon la hauteur que vous voulez) (Mettre un peu de scotch d'électricien/chatertone pour que le tuyau s'emboite bien dans…
This is a 3D modeled body cap for the Micro Four Thirds Platform. This design features a rotation stop so you cannot over turn the cap. There is also a position marker on the front of the lens cap, like the genuine body caps.
It is a foldable four wins. the display can be plugged together and glued witTangit PVC-U If necessary.
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. When downloading, do not forget that you do not need to click Download All, because in…
This is an accent cap to put on top of the Plateau. I felt it looked really nice with a different color
This is a model for a bog-standard 4-inch outdoor electrical junction box. It should work great for things like motion-sensing lights (what I'm personally using it for) overhead lighting fixtures, and whatever else you use round…
COBOT: Four servo legs and distance sensor robot I present my latest project, COBOT, a robot that can move thanks to 4 servo motors and get the distance to obstacles with the HC-SR04 distance sensor. This is an ongoing project I have made…
v4 foundation is confirmed compatible with OEM baseplates. This foundation piece resolves a number of issues identified with other foundation pieces I've seen on this site, mainly: tile spacing, proper hex shape, compatibility with OEM…
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
Just a pack of four non-traditional garden gnomes . You can scale them up as you want, but i do not recommend significantly reducing the size, as this could lead to errors in wall thickness. My print settings(PLA): 0.16mm layers, 2 walls,…
I have devices that like to drain batteries and then suffer leakage, (and one AAA device in particular), so I like to keep the batteries outside the device. Here's a case aiming for minimal size and reduced material, while maintaining…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Fouga Magister Here is the first aircaft a the set : the famous fighter of the…
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. When downloading, do not forget that you do not need to click Download All, because in…
🔵 Flexible Caterpillar 🔵 I created 4 versions (8,10,12,14) Versions 8 and 14 are in the video and picture. Number means the number of parts from which it is formed. I do not recommend TXT for this print . PEI is sure that it model will…
This is my take on TI4 organization including Prophecy of Kings. As with all my inserts, my goal is to minimize setup and teardown as much as possible while keeping the contents snug and protected from jostling. All files were printed…
Just a simple hex tile people can print to honour Sanjay, one of the co founders of E3D who passed away on 11/27/21. Assets include Fusion360 and STEP files should anyone wish to modify to fit a hex tile pattern they already use. Gcode…
Remixed the great Modular Desktop Fountain by 3D Printy so that both the plateau and pipe can be run off of a single pump. Changes to the original: Split Plateau Fountain: Splits a single pump source into two outlets, one for the standard…
This is a replica of the four piston bleed block that TRP sells. It is intended to be used with TRP DH-R Evo and TRP Trail Evo brakes but may work with Shimano four piston brakes as well since they use the same pads. Printing Instructions…
Basically, I needed a fountain for a broken outdoor fixture and there really weren't any that you could get at the store. So, enter 3d printing. I searched the web for an already made fountain, but that didn't work. I found this little…
Congratulations, you've found a four-leaf clover! 🥳 Two STL versions, with a groove along the contour of each leaf and without. Three profiles, the first two are the same STL, in the first profile the fuzzy skin is enabled. Easy to print,…
Larger bases for upcomming addons :-). Print them the same way as the original. (I fixed one minor issue with the outer that overhang that the original design has. The chamfer is 0.2 mm to small there, resulting an in very small 90…
I've been a fan of the Singapore Merlion since I served a mission for my Church in there. So I knew I'd need to add it to my modular fountain. I basically took the system for the tower fountain and adapted it to this, but I had to rotate…
This is a remix on 3D printy's Desktop Fountain. My fountain is using all of 3D printy's original models except the splash guard. The “splash guard with no leaks” is willsides which I used a dremmel to cut out the wire hole. This remix…
I have way too many fountain pens. I like to have them on the desk and now I have a way to safe some space. There are different versions you can print.
Wishing you good work and fun I would be happy to receive feedback and photos of the make. Thanks
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Models for the two main dragons Tairn and Andarna in The Empyrean series of books, the first of which is Fourth Wing. There are 2 versions of both dragons, with and without a minny dragon cutout in the middle. Tairn has his morningstar…
This is an improvement over https://www.printables.com/model/348815-fountain-pen-version-2 . I lengthened the cap slightly to leave more room for the nib and I made the section more sturdy. Layer Height: 0.2 Infill: 20% No supports…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
Show off your favorite pens while keeping them within reach! This is a 4x1x3 Gridfinity display case for 2 fountain pens. It also works for ballpoint pens, pencils, small screwdrivers, and similar implements. If you need a larger case,…
A backpack for arms made for the Atelidae.
It's a story. A few weeks ago we were in Paris and everywhere you could buy expensive models of the Eiffel Tower and some even flashed. So I promised the family that I would print it for them and it would be lit. :) Since I used the add…
Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
A curvy designed bowl with four compartments. Ideal for snacks... The standard dimensions are 200mm x 65mm. It can be scaled as desired. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
Someone i know wanted to print the version i remixed it from, but the bowl and cylinder itself was too tall for her purpose (chickens that are currently under a heat lamp), they would potentially drown because of the water level. So i…
Qui n'a jamais rêvé d'avoir quatre bras ? Dummy a la chance d'en avoir quatre, en plus des deux qu'il avait déjà, petit veinard. Grâce à cet accessoire de luxe, Dummy pourra réaliser ses activités favorites plus facilement et rapidement.…
bague de foulard https://www.thingiverse.com/thing:1019036
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
The flow from the original waterfall fountain tends to flow to one side. This is because of a sideways water current at the mouth of the fountain, caused by it's internal structure. I have recreated the waterfall fountain from scratch in…
Halloween-themed parts for the Modular Desktop Fountain! https://youtu.be/3PsxrwF2fdY https://youtu.be/dAKaOwgOqy0 Options Grave Plain - Water flows down the side RIP- Water flows down the front Pumpkin Merged Separate Lid Cauldron…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
A fountain top for cat fountains - shaped like a cats skull I took the original scan of a cats skull and made it a solid object before tunnelling out a channel for it to become a fountain top for my cat fountain. The skull is printed…
A fountain. Based on a real fountain located in Lodz, Poland (slightly modified to be supportless and fit fantasy theme) Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d…
Update July 28th, 2020: Added a smaller version scaled at 75% for a quicker print time and to save filament, it's less than 5 grams. It's big enough to determine cooling quality but the normal version is a little easier to see the…
Beim lesen die nervigen Seiten fetshalten!
Plateau Fountain for the "Modular Desktop Fountain" by 3D Printy, with two openings spaced 120° apart
Cookie cutters
Since it wasn't included in the original release, I made it. Also, I noticed that the Plateau Step Plate doesn't have the same 0.4mm chamfer that Plate Cord does, so I added that as well. Thanks to 3DPrinty for the original model, I think…
The design is based on the Longworth Chuck, it's a great movement and normally used for Woodturning. The chuck's original designer sadly died after showing the design at a club meeting. The late Mr. Longworth of the Hunter Valley…
I wanted to integrate an indoor fountain with a semi-hydroponic planter setup, but didn't find many options fitting my taste, so I designed this. For the substrate, just use some regular large expanded clay pebbles, they should be large…
The Death Star and The Millennium Falcon as simple Line Art earrings. I only made them with a 0.25mm nozzle so far. So I'm not entirely sure how they'll do with a standard 0.4mm nozzle. If you do, please let me know how it went.
I have this birdbath and solar powered fountain, but the nozzles that came with it shot up in the air and would pump the water out of the birdbath. Not a good design. So I made a new nozzle. This directs the water down. Now the water…
I called this pen the Alma Fountain Pen because I made several iterations (this is the 4th one) but the soul (alma) was always the same: an easy to print fountain pen body, section and cap, compatible with Jowo #6 nibs (popular and easily…
Update 2026/08/20 : V2 rollers available The V2 rollers are now available with an improved cell geometry. Thank you Kahera for your advice ! If you already printed the original version, you only need to print the new rollers…
this is a modified bowl from the step fountain which allows one to stack two bowls in one tile this allows for the step fountain to double back on itself printed on 0.25mm with no supports necessary to make this work one would need to…
Tamashii: Chronicle of Ascend is an Awaken Realms Lite game with a cyberpunk aesthetic and scenario-driven play sessions. Wanting to keep all the content together in the smallest space possible, I've created an insert that gathers the…
SpaceBalls :We Ain't Found $hi+ A free sample from the MyClub Spaceballs Little Army Men Collection
This is my version for a splittet Plateau Fountain with 2 or 3 outlets for the great 3dprinty Fountain. added a little extra fancy top and reduced the outlets a bit, so there should be enough water to make a nice fall. UPDATE: the outlets…
Hey everyone! Another day, another Halloween decoration! This time, I decided to create a spooky set of pumpkin designs with witches, bats, cats, and haunted houses. I wanted each piece to have its own eerie charm while fitting perfectly…
Commercial use is NOT allowed for this model
Python Macro for FreeCAD to create custom bases for the Modular Desktop Fountain Project. I have printed a small base which was created with the script, with default settings. The base plates fit and the other dimensions seem to be…
Cut out the base of the tower fountain so it attaches to the plateau fountain by friction, extending the maximum height (make sure your pump can handle it) The Splashguard got extended by 2.1mm so it can fit a 2mm laser cut acrylic sheet,…
A 6cm diameter four colour globe with relief including a stand. If you are using PrusaSlicer, by far the easiest way to print this is to use the two included 3mf files. Otherwise, check out the picture of the parts: that's what you want…
This is a set of different supports and braces that can be used to prevent sagging of RTX 4080 & 4090 Founders Edition GPU's in the FormD T1 v2 (and v2.1). The two braces (short & long) attach to the case spine and provide support for the…
