Counting matching models…
Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for PETGSource material: PET
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
A remix of yzfdmeier's Frankford Arsenal X-10 Case Feeder Shuttle Block . I cleaned up some details that improved the overall fit and finish. Also, added a maker's mark to differentiate mine from his. To use, push the case shuttle towards…
This amounts to nothing more than saw it being reviewed and said that's a great idea and I can make it. So I've included two versions of it with and without a top cap so you can choose which one you want. Print Settings Printer Brand:…
This model allows you to mount the Mr. Bullet Feeder collator to the Frankford Arsenal X-10 using Mr. Bullet Feeder bracket, rotated downward, and the stock mounting holes on the extrusion for the Frankford Arsenal Bullet collator. Print…
I needed a place to put the shell plate and tool head while taking measurements to design and build accessories for my Frankford Arsenal X-10. So, I whipped together this handy caliber conversation stand… The stand is comprised of two…
Anyone who's has spent any period of time with an X-10 press knows all too well that jams that can occur as a result of the shell plate retainer loosening up and rotating counter-clockwise every so slightly. This rotation repositions the…
One of the heartaches of the X-10 Powder Measure is to remove the hopper and drum assembly from the lower part that attaches to the tool head, requires removing 3 M4 cap head Allen bolts. These bushings along with these thumb screws ,…
I hated how difficult it was to load straight walled cases like 44, 38, and 357 and I kept trying to lose the included collets. So, I designed collets with a beveled mouth that I can re-print whenever I inevitably lose or break one. I…
On Frankford Arsenal X-10 presses equipped with their bullet feeder, this tool disables the bullet feeder by preventing bullets from being feed to the case and bullet seater die in station 9. To use the feeder block, hold the ridged…
For those that have the FA X-10 bullet feeder, but either don't need the collator or have the collator but wanted a coinvent place to store your case simulator, this is the model for you. You'll need four M5x30mm socket head cap screws.…
Printed 0.2mm, 3 Walls on it side with tree support and a brim.
I do a LOT of reloading and just purchased another single stage press, the Frankford Arsenal M-Press to supplement my progressive presses. So far I like the press and the ability to easily swap dies in a matter of seconds. What I don't…
Bullet feeder plates that fit the Frankford Arsenal Bullet Feeder. Rifle bullet plates are not available from FA, and each of the pistol calibers are purchased seperately (with a bullet dop and seater). I built these to fit the collator…
Spent primer bottle adapter for Frankford Arsenal X10. Print with 100% infill to get needed stability. Fits standard U.S. sized bottles.
Powder Check Die for the FA X10. Plugs into the head and sound the alarm if the charge is not correct. Case activated Uses magnetic reed sensors and some basic wiring. Reed Sensors: $10 - (…
Frankford Arsenal kinetic bullet puller wall mount. Use to screws to fasten it to the wall. Category: Other
Printable Brass Plunger/ Reducer Matched Pairs. Created these with labels to correct size pusher and brass chute exit. Others on Thingiverse, but thought I would add mine as they are matched pairs. Updated 4-6-25 to add 38 Special / 357…
Sometimes cast lead buckshot doesn't come out perfect. At trick to get them more uniform is to tumble them in a rock tumbler. However I didn't want to pay for somethin I'll only use once or twice a year. I also didn't want to coat my…
The Square Funnel for Frankfort Arsenal Rotary Tumbler (F.A.R.T) fits snugly into the drum. However, it didn’t cause any brass loss from the square box during the filling process. The funnel is printed in PETG, but PLA should work as…
Print Settings Printer Brand: PRUSA XL Supports: Yes Resolution: 0.2 Infill: 15% Filament brand: Overture PLA Filament color: Black Filament material: PLA
Remix of Frankford Arsenal X-10 Case Ejector Guide
So I have included bother version of this, with and without the pegs attached. I have taken to printing the begs and the holder separate simply because it makes for a nicer print. As I recently picked up this set I built this to get it…
Need replacement intelidropper tube look no further. Mine came in broken in the box. instead instead of returning i hopped in F360 and whipped this up.
This strainer cap allows you to pour water in one side (using the stock large-gap strainer cap) and wash out all the filth, water, and bubbles through the other side into a sink or similar without losing your stainless steel pins.
I broke my Component Catch while pulling 9mm and so I quickly designed and printed a new one. This doesn't have the ribbing like the original to attach a hose to as I never used that. Needs to be printed in a durable plastic (Maybe ASA or…
One of the biggest complaints about the M-Press is the die blocks. These will replace a die block, and allow you to use you standard die lock ring sets. These will allow you to remove the die/lock ring and place a new die/lock ring in…
Für Zusammenbau: Teil 1 + 2 mit Superkleber verbinden 3 Stk M4x16 Schrauben 3 Stk selbstsichernde M4 Mutter Gummiband Schraubverbindungen nicht festziehen. Alle verschraubten Teile müssen beweglich bleiben.
Replacement for the bullet feeder bullet release. Yes, I lost mine on my reloading bench and needed a replacement. Nowhere to be found, so I put this one together (fortunately, a buddy of mine could give me his, so I had the dimensions).…
My factory gasket went bad and started allowing powder into the bearing, causing the motor to stall. This part creates a nice, tight seal around the opening while still allowing the dropper to rotate without any tension. I trimmed up the…
I bought the Double Alpha primer tube filler and did not realize, that it requires the Double Alpha tubes to work. Well, I have a bunch of Frankford Arsenal tubes and designed this adapter to work with the tube filler. You have to remove…
Picked up the Frankford Arsenal funnel set and am really liking it, As I have all of my reloading equipment on peg board. So I made a custom holder set for it for the peg board. I've been finding it
A simple funnel for the Frankford Arsenal X-10 powder measure. Print with the big side facing the bed.
Stabilizes and increases the height of your powder trickler. Supports are needed. Scale the Z axis for height adjustment. printed with PETG.
With thanks to Printables user, steffanders for his very thorough work to create PET bottle PCO28 1810 thread standard models. IOWs those used on popular soda and water bottles. Published in Dec of 2022, it includes both caps and bottle…
Remixed this to add to the X10 Bullet Dropper set I created here ( https://www.thingiverse.com/thing:6995257 ) The 45 ACP is large so the 3 BB format did not work. So I modified this excellent model for this caliber to add to the set of…
Vaccum attachment for Frankford Arsenal Universal Case Trimmer. Attaches to 1.25" OD vaccum hose with a taper for a tight fit. ID of attachment will be a slight press fit to the case trimmer. Print with flat face down. During assembly,…
Frankford arsenal rotary case media separator bucket clip to secure the rotary unit
Updated (I hated seeing the wires exposed) with expanded box and wire cover (Version 2). Snap the wire over over the LED light wire Takes a 12V input and switches on and off based on bullets in the tube. Place on the Bullet Drop Die to…
These Stop Switches are designed to work with the Frankford Arsenal Bullet Collator and it's auto stop when the tube fills with bullits. I could not find a switch with a light enough pressure to trigger when using 55gn 5.56 etc. So I…
I needed a way to store my Extra Turret for my Frankford Arsenal Precision Turret press so I designed that thing. A dust cover will come soon.
no support easy to print easy to setup
Recommend printing vertical with wide end down.
pretty simple works with most filaments. the plastic collets that come with it feels sloppy, these feel more solid and repeatable. works for my reloading. Simply remove the plastic collet and metal bushing, slip this in and adjust. I have…
For 10mm Frankford Arsenal small primer tubes.
The Square Funnel for Frankfort Arsenal Rotary Tumbler (F.A.R.T) fits snugly into the drum. However, it didn’t cause any brass loss from the square box during the filling process. The funnel is printed in PETG, but PLA should work as…
A remix of yzfdmeier's Frankford Arsenal X-10 Case Feeder Shuttle Block . I cleaned up some details that improved the overall fit and finish. Also, added a maker's mark to differentiate mine from his. To use, push the case shuttle towards…
