Counting matching models…
This is a bar for Frigidaire FFTR1821 door shelf. Ours broke after 2 years so I design a replacement. It's a bit deeper to reduce the stress on the bar when storing oversized jug (in our case soy sauce). Should fit 30" fridge with the…
The door bins that came in our ~20-year-old refrigerator gave out about 15 years ago. Frigidaire wants a whopping $55/ea to replace with an official Frigidaire part. But I am a 3D Printer! This design doesn't quite mimic the appearance of…
This is a replacement shelf for a Frigidaire 241691311 refrigerator. It goes on the upper section of the door. The shelves that come with this refrigerator are an extremely poor design, and break almost immediately if you put any weight…
Thanks to @Kemmotar for the excellent design of the original. I made a few different sizes, and decided to put my Ender Extender kit to work. The result is marvelous. 30% Infill was used here, in Cubic Subdivision arrangement. I only did…
Originally modeled in Tinkercad as a replacement for a lost hinge courtesy of my kids…. Printed in PLA, general, defaults are ok, supports recommended for pin. This should slide onto the hook built into the door, however, in my case,…
The door shelves on every Frigidaire refrigerator Ive owned has broken in the same spot in the middle. This model helps fix that problem. Recommend printing with at least 3 walls and 20% infill. I printed in PETG as its a little more…
Nothing special. I just made a prototype in PETG. Update- Added a version 2 that allows the barrel section to be modular making the print quicker and cleaner. Also the tabs are offset to very slightly to allow only one direction of…
Multiple knobs from my Frigidaire gas range broke within two years. Replacements are expensive, so I modeled this myself with measurements taken from a working knob. The length of the shaft is 30mm. The outer diameter of the shaft is…
Note that this is not the depth of the original shelfs. It is much thinner just due to weight concerns if I made it larger coupled with me not wanting to split the model to print on my 330X330mm bed. If you do have to to split the model…
WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…
Multiple knobs from my Frigidaire drop-in range were broken in various degrees. Replacements are expensive, so I modeled this myself in Fusion 360 with measurements taken from a mostly working knob. I printed mine in ASA/ABS for heat…
A simple mag-mount for the ice scoop that accompanies the ice maker. Remixed from a model found on thingiverse.
The original button broke. Replacement cost is prohibitive (30$ on Amazon !!!). Category: Replacement Parts
Bracket to repair a broken refrigerator handle on a Frigidaire LFHT1817LW3. This is for the fridge handle, not the freezer handle. Requires cutting off an exact amount of the handle due to the spacers inside the cap part. Improves…
I had a soda can explode in my mini fridge this winter which broke my original Frigidaire mini fridge soda shelf. I designed this one to match the factory shelf. I printed with supports under each side at 30% with PETG filament. It fit…
Fits Frigidaire Model: FGHD2368T and Im sure many others.
Our metal (cast zinc?) strike broke so I modeled this from scratch and printed it while we waited for a replacement. Worked well enough that we could do a couple loads of laundry - printed part seems like it actually holds up pretty well,…
A replacement knob for my Frigidaire Stove. I printed it at .10 with PLA, but you do you boo.
Clips to hold stop shelves from falling off on Frigidaire FFSS2625TS0. Printed with .4mm nozzle with layer height of .3mm
My Frigidaire refrigerator water dispenser catch tray warped so badly that it was looking horrible. Decided to print this using a light grey ABS (unbranded) and improved upon the OEM by adding vent slats throughout to A: see if the catch…
This model will replace a broken bottom cam for many refrigerator models. Part was created in Fusion360. Here is link to part file, if you care to make edits to the original design. https://a360.co/49LX8ie
17 years ago, we bought a Frigidaire "Heavy Duty Commercial Freezer" to keep bulk frozen goods in (we often shop at Sam's Club or Costco). It still works... but the door handle broke a year or two ago. Actually, the holes in door aren't…
The stem broke on mine so I printed a new one.
Replacement starter knob for a Frigidaire Dryer. Designed in AutoDesk Inventor 2013 and printed on DaVinci 2.0Duo by xyzprinting. Updated STL file to correct Dimension issue. Print Settings Printer Brand: Creality Printer: CR-10S Rafts:…
This ice scoop holder is designed to provide a convenient and hygienic storage solution for your ice scoop. Whether you’re organizing your home bar or keeping your ice machine tidy, this holder ensures your scoop is always within easy…
French: Le logo de l'USAP (L'Union sportive arlequins Perpignan-Roussillon) l'équipe de rugby à 15 de Perpignan. Ce logo est disponible avec ou sans emplacement pour mettre des aimants. Les aimants doivent être de taille maximum: 10mm de…
Designed for three (3) 8x3mm disc magnets to attach the plate to any flat metallic siding. What You'll Need 8x3mm disc magnets https://amzn.to/4hJ8OVI * 9oz (3.3in wide) Ice Scoop https://amzn.to/3Gr8Ncp * *Amazon Affiliate Link Different…
The gas burner knobs on our Frigidaire gas stove are very easy to turn and activate accidentally, or, by a child. This is a simple “lock” that prevents the knobs from being able to be pressed and turned.
Replacement upper rack roller for Frigidaire Dishwasher, Model No. FDB2410HIS2A. This part did not have a manufacturers part number as it was only sold (that i can find) assembled with the upper rack. The original part was made of a…
I really appreciated the existence of a replica dryer knob since the "official" version is over $30 to buy, however, the thin and shallow mechanical connection broke even when printed with polycarbonate. This version fills in the gaps and…
Frigidaire Washer/Dryer Combo Adjusting Bracket 5303212877 Made this discontinued part for someone but they didn't end up buying it. Please help me verify the fit! Part Information This washer suspension spring adjuster insert (part…
After almost 15 years of heavy use, the door interlock mechanism of my Frigidaire washing machine gave out. This replacement faithfully re-creates the functional aspects of the part while being slightly adapted for easier FDM printing by…
Our fridge has frustratingly never had more than one of these spacers as they were lost almost immediately. I put these together quickly after using a caliper and they work excellently! Hopefully this can help someone else.
This lid hinge will fit many chest freezers using plastic hinges: Beko Freezer : CF381, CF380 Electra Freezer : EFC38 Frigidaire Freezer : FC1500, FC388 Norfrost Freezer : C4DE, C4BES, C43F, C4EFG, C4EF, C4EF110, C4EF110L, C185DL, C60,…
It is frustrating when you want to turn on the night light on the microwave, but cannot see the button. And all buttons are smooth, so you can't feel where it is. I created this light bulb icon to print and place on the lightbulb icon on…
I've included the STEP file in case you want to modify it for your microwave. I printed in PLA with relatively high infill (50% or so). I expect it won't last as long as the original, but it'll be a lot less than $150 when I need a new…
We bought a Frigidaire Gallery AC unit (Model GHPC132AB1) last summer. We own an older house, and knew that the room that we would want it in the most did not have any windows that would open. Our front door did, however, have a small…
This may look like some futuristic font where every number is stretched and a breathy voice is just saying “fiiiiiiive” the whole time, but it’s actually a replacement bracket to hold the glass shelves on a Frigidaire FRSS26L3AF7…
Fits a bit snug. Use a bit of grease on the knob shaft (….uh).
This is a replacement door latch for Frigidaire microwaves. Modeled after original part with slight modifications to fix known issues with Frigidaire microwaves. Print with supports, only on build plate. Recommend printing in ABS or PETG.…
The drawer guide for my Frigidaire oven broke. this is a replacement for the part that attaches to the oven which the drawer's guide rail slides over. The photo of it in my oven there is a bit that sticks out. I've edited that out of this…
Printed from pla, then fixed in place with VHB double-sided tape.
The main handle on this microwave is made of steel, but it mounts via 2 plastic pieces (painted to look like steel). The plastic parts are fairly easy to break, and the handle is only sold as a complete unit, as far as I could find. Print…
I modeled this as a replacement for Frigidaire part number 316407301. I recommend printing it so the curved part that the drawer slides on is parallel to the print bed so the layer lines help it slide.
Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill, lots of top/bottom layers and perimeters. I suggest in ABS or PETG, not PLA which would be too brittle. My picture is of a…
This holds the remote control for my air conditioner. There's a countersunk hole to screw it or you can double stick tape it. Category: Tool Holders & Boxes
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
Ice drum replacement for in-door icemaker for Frigidaire Gallery LGUB2642. Tolerances are tight, but only required minor filing to fit the ice auger. Printed in PLA+ and has been in use for several weeks now, seemingly without any…
This is a riser for the leveling foot on a 30" Frigidaire free standing range/stove to gain additional height. There are models for 4 heights 5/10/15/20mm. Print with 4 or more walls and 15-20% honeycomb infill for compressive strength.…
This is a knob and 2 different inserts depending on the size dial that you have on a Frigidaire Oven, stove, or range.
This is a gas stove knob safety that fits the Frigidaire Gas Stove. It prevents the knob from being turned on accidently. Printed with no-supports, in the flat position with PETG Tough.
Handle upgrade for Frigidaire Microwave: FRIGIDAIRE Model No. FFMV162LBA. Designed and printed for a customer :) 4 Piece print, no support required. Uses original screws for mounting. Update: added step file of the clip if anyone needs.…
A bracket broke in the freezer so I decided to try and print one instead of spending $50+ on one. I split the bracket in two because it wouldn't fit on my MK3S or Mini, but it turned out to fit on the Mini in two pieces. It's identical to…
So our newer Frigidair has a deli drawer that keeps popping out of it's connection to the sides when you pull it open (there's a pic of it like this) so I printed this clip to prevent that. I didn't need any tape or glue it just popped on.
DIY Lower Spray Arm for Frigidaire Dishwashers Durable DIY lower spray arm , engineered for simple assembly and heat resistance. Built using CPVC piping for spray arms and a 3D-printed ABS connector head reliable OEM alternative, this…
This fixes a very common problem on Frigidaire door shelves that reinforces the hooks that hold the shelf in. Simply glue them to the shelf and it will last years longer than any replacement.
This is for Frigidaire dish washer model # FGID2468UD0A Works best in poly carbonate
A clip for the inside of Fridgidaire refrigerators to mount the handle to the door.
Designed for the Frigidaire Custom-Flex system that comes in their refrigerator doors. By utilizing the modular mounting system, you can now add quick and easy access for your eggs! Print a second one to store a full dozen! Printed in PLA…
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Fridge handle broke, oh no! Not really sure which refrigerators these would be compatible with but if your handle looks like this one maybe it will fit your needs, it seems from some cursory online research most Frigidaire refrigerators…
If you own one of these stoves you know. The backlights on the knobs don't need to be this bright. These will block most of the light but still glow to let you know a burner is on.
This is for Frigidare dishwasher model #FRID2468UD0A works best in Polly Carbonate
Replacement part for Frigidaire Dishwasher, Model No. FDB2410HIS2A. The original manufacturer's part number is 5304482490. On the parts diagram it is item 135. The original part supplied by the manufacturer is made a an inferior plastic…
This is a very simple fix to a problem that I encountered on my Frigidaire Gallery fridge with french doors, where the flap on the left door wouldn't always open/close properly. There is quite a bit of play in the flap assembly, so over…
Freezer Drawer Basket Attachment Clip (Frigidaire Model PLHS269ZDB0) Clip for attaching the basket drawer in the freezer to the rails. Designed for my Frigidaire Model PLHS269ZDB0 The drawer clips broke on one side so this file was…
This is a repair coupler for Frigidaire refrigerator door bars . These bars are known to break, and replacement parts can be surprisingly expensive. This coupler is designed to join the broken sections back together , extending the life…
Drain extender for Frigidaire window air conditioner model #FFRE08L3S1 (may fit other models). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used. Needs supports between part…
This is a repair “kit” for the sagging hinge problem. If you’ve owned a Frigidaire Affinity washing machine for some time (or one of several similar models with various other brand names), you might have developed the same problem—sagging…
This is for anyone with this particular model that experienced the same issues I did. The freezer stopped working 3 months after I got it, and warranty repair or replacement was refused. I had no choice but to attempt to fix myself. The…
A wall-mount Frigidaire AC remote control (YX1F8F or YX1F9F) holder I designed so I could put the remote on the far side of my room and use it like a thermostat instead of leaving it precariously perched on the back of my couch near the…
A buddy of mine has an old 50s era pickup that is nicknamed the Frigidaire. I designed this logo based on the old fridge logos that could be found on vintage appliances. This is designed to have magnets inserted in the back so it can be…
The lower hinge pin (that the fridge door sits on) on my Frigidaire FGHT2055VF1 came cross threaded from the factory. I needed to switch which way the fridge door was hung, and until I could get a metal replacement pin sent to me I…
As requested by a Reddit user.
This is a remote holder for my Frigidaire window AC units. I mounted one under my office desk and one on my headboard in my bedroom. I have been using these around 4 years and are probably the most daily used 3D print I have ever made…
The detergent dispenser door on our Frigidaire Dishwasher stopped opening during a wash. I also noticed that there wasn't a decent spring back on the dispenser door lock when you manually cycled it. It turns out the arm which captures the…
My fridge did not come with the left bracket to reverse the door swing, so I mirrored the right bracket design. Both left and right brackets can be found here.
These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…
These clips hold the long thin door trim strips on a Fridgidaire side by side fridge/freezer. They cost $15 used each on Ebay, or $20 new. Or probably 1 penny to make.
I printed this out of TPU with 3 walls, 8 top and bottom layers with 20% gyroid infill. There are two types of dimmers here to account for the presence of a screw head protruding from the behind the knobs. On my range, I needed one of the…
This is my own model for and replacement Hinge Bearing for Frigidaire and electrolux (5304507146) I took the measurements and created it
Frigidaire Dishwasher Wheel for Upper Rack One of the wheels on our Frigidaire dishwasher wore down to the point that it fell out of the track. This simple model replaces that wheel. This was designed for model LFID2426TF2A, but may fit…
This is a replacement bracket for the top crisper drawer of a Frigidaire FRSS26L3AF7 side-by-side refrigerator. It may fit other models. The original bracket has self-tapping screws with a very thin wall separating them from the fridge…
I needed to make a new one since i never had the clip, and what i found; https://provencherappliance.ca/product/frigidaire-fridge-freezer-door-handle-end-cap-white-215870629/ Was the wrong color and expensive.
I was missing the cam hinge on my fridge and couldn't figure out which was the correct replacement as none of them seemed to mount correctly or seemed like it would work right. On my Fridgidaie there is a plate at the bottom where the cam…
Hinge pin for Frigidaire fridge door. 100% infill for strength. Supports. Recommend printing at 50% speed in ABS or ASA. For best results, print at 5 degrees C higher than the material calls for to get good layer bonding.
FRIGIDAIRE oven Replacement for a Drawer or Glider
This was designed specifically for the Frigidaire 20.0 CUFT Garage upright freezer (Model FFUE2024AW). A friend of mine asked me to make one since he couldn't find one online anywhere. He gave me an existing clip (which was extruded…
The switch that controls the damper in my refrigerator broke, preventing the motor from turning and opening and closing the damper. This is a direct replacement for that part, that's more sturdy than the original. When replacing, ensure…
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
Fridge handle broke, oh no! Not really sure which refrigerators these would be compatible with but if your handle looks like this one maybe it will fit your needs, it seems from some cursory online research most Frigidaire refrigerators…
I've included the STEP file in case you want to modify it for your microwave. I printed in PLA with relatively high infill (50% or so). I expect it won't last as long as the original, but it'll be a lot less than $150 when I need a new…
I printed this out of TPU with 3 walls, 8 top and bottom layers with 20% gyroid infill. There are two types of dimmers here to account for the presence of a screw head protruding from the behind the knobs. On my range, I needed one of the…
I was missing the cam hinge on my fridge and couldn't figure out which was the correct replacement as none of them seemed to mount correctly or seemed like it would work right. On my Fridgidaie there is a plate at the bottom where the cam…
