166 models
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…
This is a remix of Livingroom Workbench 's design for an IKEA ALFTA. I made some changes to the model to make it better compatible with Tesa powerstrips, which are a bit smaller than IKEA strips. The model comes in two versions: The…
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
Maße können wie üblich im Slicer geändert werden. Dimensions can be changed as usual in the slicer.
foldable holder, the joint holes measure is 2.3mm, so raw filament can be used for the final assembly. some WD40 and small screwdriver to clean the passages are needed in order to ease the final assembly 2 printing files due to dimensions…
As for the title this is a SAA45 27 bullets capable container. Attention: use abundant WD40 on threads before the 1st coupling to ease it, then no more lubrication is required
Sometimes I need a pen near my 3D printer. Thus I designed a holder for it. Attached with double sided adhesive tape. In the gcode I have added a M600 change filament command. So you can print it with two colours without MMU.
Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…
All technic, liftarm LEGO Brick from the application LEGO Studio. 15 real Bricks LEGO (with the logo on it)
This model is compatible with the lego system.
Snuff box with build in catapult. New Version with a dent, for a more easy lever movement (only visible on the renderings, not the real photos). I prited it in PLA with a 0.35mm nozzle, 0.20mm layer height and a honeycomb infill of 0,20.…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…
This model is compatible with the lego system.
Parameters such as diameters and dimensions should be selected empirically, depending on the printer you have and the filament used, and you should also take into account the spare dimensions for grinding and polishing, as well as…
Eine Umlenkung für die Luftauströmer einer Heizung für Wohnwagen, Wohnmobil etc. Die Seite zum Einstecken hat einen Aussendurchmesser von 54,70 mm. Gedruckt mit Gitternetz-Stützen
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Alliance Chieftain model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This model is compatible with the lego system.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hi, this is a collection of lego technic liftarms/beams. They were created with help of this web app ---> https://marian42.de/partdesigner/ but I had to make dimensional changes. Print settings: Raft - may be useful with PLA, don't…
Parameters such as diameters and dimensions should be selected empirically, depending on the printer you have and the filament used, and you should also take into account the spare dimensions for grinding and polishing, as well as…
OO Gauge container wagon Based on an amalgamation of an FTA and FSA intermodal flat wagon. It was hard to get buffer heights correct for OO, so the mix seemed the best compromise. ISO containers (see my fork of phrxmd's container ) can…
This model is compatible with the lego system.
This model is compatible with the lego system.
M-LOK stile M4 rail 200mm length 3x m3 screws and nuts
This model is compatible with the lego system.
This model is compatible with the lego system.
Hierbei handelt es sich um einen Flash Hider, den ich angelehnt an den Originalen von der AK 74 entworfen habe. Dieser Flash Hider hat ein Linksgewinde von 14mm. Passt also auf alle Airsoftwaffen mit 14mm Linksgewinde! Print instructions…
Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Die Ausstecher in Mario Schriftart wurden während eines Twitch Streams entworfen und modelliert. Sie basieren auf einen Font von fsuarez913 den ich bei dafont.com gefunden habe. Benötigt hatte ich die Ausstecher um Fondant für eine Torte…
Kit Card for 3D print
This model is compatible with the lego system.
Printed mine with a 0.8mm nozzle and 0.2mm layer height. Supports were deactivated without problems, the space in the model is not needed anyway. Careful with tightening of the screws, they will interfer with the magazine if tightened too…
This model is compatible with the lego system.
LEGO Technic Compatible Special Liftarm 1x11x3
Perfect for your garage or man-cave. Remix I made for my father. Enjoy and check some of my other sign remixes : https://www.printables.com/model/535312-fk-around-and-find-out-street-signs
Two things included: 1:1 clone of the IKEA ALFTA hook Custom version for the RIBBA picture frame with the deep hooks on the back. Some RIBBA frames work with the original IKEA hook, but some need this one because the hook doesn't reach…
Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…
When printing a spool winder, I was wondering if I could print the ball bearings as well. I had some 6mm plastic softair BBs lying around anyways. But I did not find any models for a 608 ball bearing using 6mm BBs. So I designed this…
Battle-scarred orc chieftain bust with tribal armor, fierce gaze, and commanding presence—ideal for fantasy displays. Print with Tree Supports on build plate only. Powered by image-to-3D from MakerWorld…
Needed the thing because it was missing when I built my CADA Ferrari. Thought someone could need it :) you can download the .stl to print or the .ipa if you want to remix it in Inventor Print Settings Printer Brand: TEVO Printer:…
This model is compatible with the lego system.
Tobacco snuff tin with dose opening. Can hold about 5 gram of snuff.
Softauslöser (AR-1) für die Nikon Kameras mit Außengewinde um den Auslöser. Getestet an S2, SP, F und F2. Wie stabil der Softauslöser ist habe ich nicht gestestet, aber er funktioniert. Eventuell mit einem stabileren Material als PLA…
This model is compatible with the lego system.
Am besten druckt man es mit ABS oder HT-PLA damit auch kochend heißes Wasser ablaufen kann. Ersetzt den Originalstutzen. Original-Schraube und Dichtungen können weiterverwendet werden.
I attempted to do this image with an aged look and mildly reminiscent of a copper relief. Unfortunately, I didn't have a light color that fit the color scheme, so I opted for white silk. Plain white was just too stark a contrast. The…
Introducing topspin whistle. This is a tool to help improve your topspin at tennis. Just put it on top of your tennis racket and hear the whistle when you are doing topspin. The louder the whistle sound, better the topspin is. Printed in…
Print the lower part with the gap for the blade laying on the outside of the handle, the top cover can be placed with the inside on the bed. Can also be mounted on both sides of the blade to improve cutting force, but reduce usable blade…
This is the IKEA HALFTA! Based on the IKEA HALFTA but half the size. While there hooks are cool. Most picture frames do not need two strips of adhesive. So I made the HALFTA. Not a perfect copy, but a better copy. This can be printed…
adapter to hang IKEA RIBBA with an ALFTA adhesive hook
IKEA Bekräfta is (according to the IKEA Homepage) the most sold curtain rod. It is available in 2 sizes and extendable to increase the length. But The transition adapter between the thicker and thinner rod is designed with a little step…
1x Hex Screw M5x25 1x M5 Nut 1x Spring Ø7x19
File redesigned to be used with the selftapping screws of the original DT990 Pro Sliders
These parts are for a vertical 10 row Jagg oil cooler fan assisted for Harley Davidson. They fit for a cooler system for Dyna 91-17, 55-83 Big Twin, 82-94 FXR, 84-20 Softail, 84-16 FLT/Touring, 86-20 Sportster. To protect the cooler from…
O-ring for liftable coffee table (French : Joint torique pour table basse relevable) model used : Table basse relevable UP & DOWN Print Settings Supports: No Resolution: 0,18mm Infill: 100% Filament: tpu Category: Replacement Parts ------…
This is an addition to the vibration damper made by Hofftari (thing:1707045) , in this case made from scratch and designed to stay below the Z frame. it is larger than other models you can find, and for me work very well. the orange…
This model is compatible with the lego system.
I've been frustrated for a while for how unhandy it is to store the Lego Technic 32009 Liftarms: So I created this organizer, which saves around a factor of 2 of space!: Furthermore: One side is open, so you can directly find any color…
Abluftanlage für einen Laser-cutter/-gravierer für Kellerfenster. Passendes Youtube-Video: (1474) Laser Abluftanlage/Laser Air Exhaust DIY | Rhön Bastel - YouTube Das Abluftsystem ist für einen 150mm Abluftschlauch gedacht. Ideal wenn man…
Tropftasse bzw Untersetzer für Kanister oder Waschmittelkannen oder was auch immer. Zwei verschiedene Größen, drei verschiedene Höhen. 15 x 20 cm und 20 x 22 cm. Höhe 1, 2 bzw 3 cm. Die große Tropftasse paßt auch für 5 Liter Kanister.…
Inspired by a pilot workshop episode about total electric failure and the use of a backup handheld nav/com, I adapted a holder for a different handheld to my Yaesu FTA-850l, so I can mount it on the dash and not only use it for backup…
It is a ball bearing useing 14x 6mm BB´s outer diameter is 46 mm, inner diameter 12 mm and 14 mm high Post-Printing I printed it with original anycubic PLA Filament. It is the second version and it runs good :) Category: 3D Printing
ITA - Copertura per silenziatori, spegnifiamma, soppressori e parti terminali delle vostre repliche da applicare per permettervi di raggiungere i campi di gioco in tutta sicurezza. Troverete il file parametrico originale in OpenSCAD per…
FTAW//prime is a sci-fi reupload of the 31K-L foam dart blaster by MisplacedMoose, using his cutting tools. Parts are in print orientation, all the small bits and the turnaround at 100 percent infill, the rest at 5 walls 20 percent.…
English (translated with deepl.com) This model is a tire deflation tool for schrader valves (car valves) designed for use by fire departments. When air needs to be released from tires to immobilize a vehicle, this is typically…
Surf sign decor with a couple of Smurfs hanging out being cool….. The popular 80's cartoon/animation and beloved creatures are back with their logo! Model Shown is printed at 20MM so it can stand on its own but can be resized or sliced…
Schnupftabak case / Gletscher Prise / snuff tabacco case Die Toleranz beträgt 0,2 mm, sodass die Schnupfdose nicht rausfallen und gleichzeitig gut herausnehmbar ist. Ich habe es für einen Gürtelclip gedruckt:…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Hi I'm gabriel, I was inspired by the other model, in fact I just modified if with some things to create a working rail for the ak74, normally ak74 doen't have rails but I really needed it, I hope you like it I made three different models…
Abluftadapter zum stebst einstellen über die parameter
The matching finials for a curtain rod from the Swedish furniture store. 2 sizes for both sides.
Description Bring a classic motorcycle to your collection with this detailed miniature model of a Harley-Davidson Heritage Softail. The model is split into multiple parts, making it easy to print in different colors — no AMS required. The…
Deutsch unten On long drives, I was always bothered by the wind blowing in my face from the vents. My eyes would get dry, and I wanted to turn the wind off, which wasn't possible. Every passenger I'd had to close the vents after a short…
El texto de la tapa ha sido eliminado. The text on the lid has been removed.
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Airsoft / Softair A2 Muzzle flash suppressor M14/1 Slotted at the top, closed at the bottom to prevent dust turbulence when shooting from a prone position. I also Upload it on Cults
This is a 3D-Printed replacement for the volume knob of the Yaesu FTA-450 radio. It might work with other Yaesu products. I haven't tested that. I printed these at .05mm layer height. For the dual color - manual filament swap. Modeled in…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Drehbare Schnupftabak Dose mit zwei grössen Gedruckt mit PLA und PETG Schichthöhe 0.08mm
Base for Vikings Blade's Chieftain ATHENA Safety Razor. The hole is 11.9mm, for a snug fit. Tinkercad link to modify:…
