Counting matching models…
Ultra-compact 9mm tall rear lens cap for Fujinon X mount lenses. Standard Fujinon cap is 13.5mm tall, I like more compact Voigtlander cap design for Fuji X lenses. At some point I realized that most Fuji X lenses I have do not protrude…
The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…
Square hood for fuji 23mm f2. It's designed to fit snugly on the original hood mount.
@MortenKolve_243546's Lens cone for the Fujinon SWD 90mm f5.6. A mock-up of the rear element and the needed lens board are included.
I decided to take the .step files and piece out all the components for the V6. The lens cone is specifically for the Fujinon SWD 75mm f5.6 lens. You will need to print a different lens cone if you do not have that exact lens.
specialy designed for this part : https://www.printables.com/model/831321-open-617-camera-v8-lens-cone-for-90mm-fujinon-
I designed a square hood for the FUJINON XF 50mm F2 R WR . The print works well with the 0,4 nozzle but I printed a version with the o,2 nozzle to make it look even more seamless.
I made this replacement top cap cover for my Fujinon 2x Teleconverter because I lost the original one. Since the 2x is the tallest of the Fujinon teleconverters (like the 1.4x, etc.), this should also fit those just fine. The cap fits…
Originated from - https://www.photrio.com/forum/threads/disks-for-fujinon-180mm-soft-focus-lens.177973/
A heavy duty C-Mount lens cap with a 12mm deep cavity, to accommodate lenses that had protruding rear elements. I have also designed this cap to be wider and heavier than most factory caps, so the lens may stand on the capped end and…
This is one of the weirdest things I have done. Still working on Links and will update you soon. I own a few Large format lenses from 90mm up to 1070mm. Most of the lenses I own would just look ridiculous and absurd on a 35mm/full frame.…
Everything is printable without supports, print the inserts and Seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try…
Everything is printable without supports, print the Seal out of TPU or similar flexible material. You will need 3x M3x30mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down…
This lens cap is specifically designed for the Fujinon 50-140mm lens with sunshield and should be printed using flexible Flex40 material in order to effectively protect the lens. Provided gcode file contains changes to default Flex…
I designed a square hood for the FUJINON XF 30mm F2.8 R LM WR Macro. The print works well with the 0,4 nozzle but I printed a version with the 0,2 nozzle to make it look even more seamless.
Lehká a minimalistická clona je navržena speciálně pro objektiv Fujinon XC 35mm f/2. Je ideální volbou pro ty, kteří chtějí chránit svůj objektiv a eliminovat odlesky, aniž by výrazně zvětšili rozměry své sestavy. Hlavní vlastnosti:…
An Open 6x17 v8 lenscone for the Fujinon CMW (W) 125mm f5.6 large format lens. This version has a Focal Flange Distance of 119.9mm. This will need to be paired with a 17-31mm M65 helicoid, and a 3D printed lensboard to attach the lens.…
This is a front lens cap for the objective lens on the Fujinon Techno Stabi 12x28 Image Stabilized binoculars These binos do not have objective lens caps as part of the original purchase. I've tweaked the model so they are a more precise…
This is an adapter ring that allows for a Fujinon SW 125mm 5.6 aperture medium format lens to fit the appropriate lens cone and board for the chroma six 17 camera. I received mine and the shutter isn't what was recommended so the lens…
An Open 6x17 v8 lenscone for the Fujinon CMW (W) 125mm f5.6 large format lens. This version has a Focal Flange Distance of 119.9mm. This will need to be paired with a 17-31mm M65 helicoid, and a 3D printed lensboard to attach the lens.…
This is an adapter ring that allows for a Fujinon SW 125mm 5.6 aperture medium format lens to fit the appropriate lens cone and board for the chroma six 17 camera. I received mine and the shutter isn't what was recommended so the lens…
Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling…
Everything is printable without supports, print the inserts and Seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try…
Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling…
Everything is printable without supports, print the inserts and the seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box,…
Everything is printable without supports, print the inserts and the seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box,…
For those of you who don't care much about taking a lens hood with you, like me, a much more compact version of my case design for the XF 23mm F/1.4 R lens. Everything is printable without supports, print the inserts out of TPU or similar…
Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling…
print without supports, bayonet side down. I would recommend PETG. Scale up or down in the X and Y Axis to adapt the fit to the tolerances of your specific printer.
Rugged Lens Box that fits Fujifilm Fujinon XF 18-55mm w/ Lens Hood, Cap, and Polarizing Filter I printed the exterior box and latches with PETG, and the internal cutout with TPU Requires 6x M3*30mm screws for the latches and hinges
An adapter that attaches a FUJINON-EX 50mm enlarge lens to the SONY NEX E mount for close-up photography from inf.
A case for a Fujinon 75mm large format lens. Also available on my website .
This is a custom designed lensboard for Lens Fujinon 210mm lens for use on a Afghan Box Camera. For more info refer to the following video
