Counting matching models…
I wanted to use the Dragonburner on my Voron 2.4 with galileo (G2SA), cartographer and EBB. I also wanted to keep the endstop, but didn't like the original huge pilar. The MGN12H carriage has a wireduct for the endstop and cartograph I…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
Upgrading my old CR10 v1 with the new Dragonburner v8 hotend and G2SA extruder. However I noticed a lack of filament sensor options for both, and I have just completed building my ERCF and needed a filament sensor for calibration. I chose…
Just a quick modification of an existing design to add extra length on the strain relief to enable it to be used for the Nitehawk36
Idealweise druckt man das Zahnrad natürlich in Nylon. Bei so einem kleinen Teil ist das oft auch relativ problemlos möglich. Auch in PETG sollte es aber funktionieren. Oft ist das innere Loch nach dem Druck durch Verformungen nicht exakt…
Remixed the model released by MapleLeaf Makers to fit my Rapid Burner with Cartographer's CNC mount ( https://cartographer3d.com/products/cartographer3d-cnc-stealthburner-mount-only-23-4g ) I used 20mm long spacers up top and 8.5mm on the…
I have remixed tetsu97 's umbilical mount for G2SA with PG7 fixing point by moving it to the right. Added channels for zip-tie that is meant to secure the umbilical cable. The stl is print oriented and includes sacrificial support (in…
EBB36 Mount with CNLinko Adapter for Orbiter 2.0 and G2SA. Solidworks file posted if you wish to make some changes. Needs (5) M3 heatset inserts. I've installed this is my Micron and Trizero and havent had any clearance issues.
Not a cad expert. untested.
G2SA 適用於 XOL M3 X 30
G2SA Galileo 2 Filament sensor based on 5.5mm ball bearings
more sturdy with 4 mounting points now! I suggest 4 aluminum stand offs! I designed this for XOL; G2SA orbiter pattern, and Vitalii metal tap! Update: added overmold for proper SHT36 support
Super fast printing keychain for Red Dress Day. Can be done with a layer swap or AMS/MMU. STL is just the file 3mf is pre-coloured for AMS. Thanks to my coworker for the inspiration of the design!
Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC
Found many different versions, but none met my specs. So I designed my own. You can mount a EBB36 board behind a Galileo 2 standalone extruder stepper. In my case on top of a XOL toolhead. Umbilical is placed besides the boad to not lose…
This backplate is very minimalist and keeps ebb36 directly behind extruder motor while supporting the canbus cable for StealthChanger from Draftshift Discord Hardware needed 2 - M3x38 cap bolts with 100% threads https://a.co/d/dL6dTwI 4 -…
I had a hard time finding for what I wanted so I used two different cad files to make this file. Fits the G2SA.
use flathead screws
Remixed br41ndamage's files to apply the space for an Omron switch and 5mm bearing to the extended extruder mount. Print according to standard Voron print settings. Update:9/19/24 - new design as the original had too much clearance for…
Following the assembly instruction for the G2S Pro delta printer, the GT2 belts should be mounted with a bolt through the belt. This is a rather crude and inflexible way to mount the belts and I decided to make a "Prusa style" belt mount.…
I added the mounting holes for the G2SA so the Toolhead PCB mount can be secured to the extruder as well as the X carriage. I had been previously using an Orbiter 2 toolhead mount and the holes do not line up correctly on the X carriage.…
Connecting locks Individual streets are interconnected by connectors, which act like locks. In certain instances, such as with small roundabouts, it is advisable to utilize a connecting street without a locking pin. Connecting streets are…
I removed a section of the main body of the Galileo 2 extruder to allow bits of stuck filament to be more easily removed
If you do not use the cutter, you need 10mm extra height else the extruder motor/ebb mount hit the CNC mount. Extended the original mount by 10mm. Installed and confirmed working!
Delta 3D Printer House E3D Volcano (G2S Pro Geeetech, Kossel, Rostock) 2x Fan3010 E3D Volcano + Silicone Socks 15 Led Ring 4x Screw M3 TWO TREES Titan Extruder Nema 17HS4023 Stepper Motor ABS or PETG Category: 3D Printer Extruders
Added a cable cutout to this great design. All so added a zip tie reinforcement slot.
Some users of the Jag2SNES were worried it hangs off the back of the AV port without any support. This brace helps with this concern.
The original spacer between the two bars broke as I applied minor yet obviously excessive force. Here's the data for printing a replacement spacer. Notes: Finding a good position for printing this part is a bit tricky as there is no flat…
This rethink of the original model incorporates sensor support for pre and post extruder, I made it to try and take advantage of the new auto-calibration features in Happy Hare. Uses 5mm ball bearings, some PFTE tubing, microswitches The…
Remixed toolhead pcb mount to place it angled like the original LDO
The G2SA knob with grubscrew by Jontek2 needed just a little more [insert :chefkiss: emoji] so I got hold of the CAD file (thanks!) added some extra parts to have it MMU ready. Also suitable for the WWG2 😎
Yep its just longer tensioner arm.
for this little guy self explanatory due to positionion supports are suggested unfortunately comments or suggestions on a prettier version are welcomed!
Extra support bracket for the Nitehawk-36 toolboard with the G2SA mount on a Dragonburner toolhead. On my v0.2 the lower hole on the mount (by Blamm) was unused so i made a bracket for it to prevent tilting of the toolhead during fast…
These lets you mount 50x20 mm LED lights on the side of the build platform of your Geeetech delat 3D printer. This gives good illumination of your prints, which is perfect for recording time lapse, etc. Source code (.stp & .3dm) is also…
Note: This model is not fully accurate, particularly in terms of measurements, until official specifications are publicly available. Category: 3D Printing
hey guys, installed a Hobbywing Ezrun Max8 into my Widemaxx. Enjoy
It's done quickly and dirty. You'll need 2x m3 nuts, 2x m3x8 screws, 1x m2.5 nut and 1x M2.5x8 (m3 here may work too). Do not use conductive filament or PLA. By the way, here are the latest drivers that work for windows 11:…
Fits the Galileo 2 stand alone extruder. Modification of the original model found here 2 pcs of M3 Voron style heatset insert is needed. Use with ~17,6mm standoffs.
Update 2026-06-15 : New files for the body part. Filament hole is now 4mm for the PTFE tube. Much smoother and no filament scratching. Please note: There's an issue with the filament scratching the sharp edges of the hole inside the body,…
This modified the left duct model for the existing Orbiter 2.0, so that the cutting arm and left duct could be installed when using the g2sa model in AntHead.
Adapter plate/mount to install the Creality "Unicorn" K2 Plus quick-swap hotend on a Reaper Toolhead running the G2SA WW OrbPattern hotend and a Wristwatch BMG extruder, including a mod so the tensioner spring knob doesn't interfere with…
The original Galileo 2 extruder doesn't fit on the Anthead toolhead. Anthead is only compatible with the Wristwatch Galileo 2 (WWG2) variant of Galileo 2 by default. This is a new front plate for the original Galileo 2 that allows it to…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
Idealweise druckt man das Zahnrad natürlich in Nylon. Bei so einem kleinen Teil ist das oft auch relativ problemlos möglich. Auch in PETG sollte es aber funktionieren. Oft ist das innere Loch nach dem Druck durch Verformungen nicht exakt…
Not a cad expert. untested.
