1 / 4
G2S Pro Delta Belt Holder/Clamp Upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa style belt mount for the G2S Pro delta printer.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 59
- Makes
- 1
- Views
- 423
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Following the assembly instruction for the G2S Pro delta printer, the GT2 belts should be mounted with a bolt through the belt.
This is a rather crude and inflexible way to mount the belts and I decided to make a"Prusa style" belt mount.
To assemble you will need 2x M3 nuts per belt holder. The holder has slots for the M3 nuts and replaces the belt holder aluminum block in the kit.
Shown model is printed in PETG.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 20% infill
- 3 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed