Counting matching models…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
Created this cover to create a nice visual appearance on the back of the GameSir G8 Controller. Especially helpful if you cut the tabs to hyperextend the controller to fit a tablet (such as the Legion Y700 pictured). Recommend printing…
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
No tools to assemble and remove The spring tension and clips hold the extender in place. Easy to install and remove. This mod requires that the end stops be clipped on the controller. (which can be done without any disassembly) Print both…
Back bracket to allow an over-extended GameSir G8 Plus to fit on an Apple M4 iPad Pro comfortably. You do have to really pull the springs apart to get this on but I'm quite happy with the results! Printed upright (lip facing up) in PLA…
This modification allows you to use the Gamesir G8 with a Lenovo Y700 tablet. If you are confident in your first layer adhesion and ability to print 45° overhangs, print with smallest section facting the bed as seen in the image. A brim…
Remix of https://www.printables.com/model/1182209-gamesir-g8-plus-extension-for-samsung-tab-s9 and fits my m4 13" iPad perfectly and is super stable. Please see the video on the original model for assembly instructions.
I wanted a case for my new phone, but being a budget option, it's not overly popular. This case is admittedly somewhat thick, but I wanted it to be able to sit flat on flat surfaces, rather than rocking around due to the camera. Printed…
a revised version from the first i made. small improvements and in easier files to print. used with M3 screw inserts. Fits ipad pro 11". but u can cut it down to fit smaller screens.
Side cover compatible with Gamesir G8 plus controller
This complete redesign from "Back Cover for GameSir G8 (universal and Y700)" was created by bassderek. This two-part design allows you to extend the GameSir G8 out to fit an iPad Mini 6. The case covers both the back and front and is…
Simple design prints lying on the side without supports -> Please print 2 for the open version In the slicer you can easily change the z height of the model to your liking, but don't change x and y 15% infill should be enough. Attention:…
Coming from the Logitech G910 keyboard, the thing I'm missing the most (the only thing I'm missing TBH) is the phone holder. I got used to it and now I find myself trying to place my phone in a non existent holder. So I made a very very…
Logitech G810 Keyboard Stand/Foot Printed in PLA - should be fine Print instructions I chose 0.1 layer height for more detail on the slope Supports just for the pins
Big thanks to tokyo2ooo for the original model. Printed with 15% infill density (gyroid) and 0.2mm layer height (0.27mm initial layer height) and black PLA from DasFilament. Please ignore the wobbling layer for the rounding on the large…
Made this so that the iPad mini 6's volume buttons aren't engaged by the sides of the gamepad. Printed mine in TPU at 0.16mm, let me know if PLA works! Also pictured: this back plane extension
This model is a fun SciFi inspired grenade. I plan to print a few and paint them out in a number of different schemes. There is a functional lock pin and handle. Pull the pin and release the handle, the body extends, exposing the liquid…
The previous owner of my Audi A6 C7 (Facelift) had lost a couple of the Isofix covers. I found a model online which works really well. Credit to the original author over at…
Made a remix of the streamdeck mount for my Logitech G815 keyboard. Fits pretty well, but lacks a bit of fricton on the keyboard "claw" when pressing the outer left or right buttons. Printed on Prusa Mini+ with PLA on its back (like in…
Description: FDM friendly print however I resin printed mine. Has holes for RGB light. ----------------------------------------------------------------------------------------------------- Print Settings: Layer Height 0.12mm (I used a…
I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
This is a tray for the DeLonghi KG89 coffee grinder . The KG89 is a very messy grinder and each time you pull out or insert the container for the ground coffee it'll spill some coffee grounds all over your kitchen counter. This tray will…
A hardshell phone case made for the moto g84. Print with PETG, 100% infill. I used the default 0.2 mm STRUCTURAL printing profile in prusa slicer printed on my MK4S. Make sure to print both the case back and the camera guard. Supports are…
BMW M4 G82 Competition This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
Made in 2 styles, one with sliding rails to make it more compact for a carry case (My personal fav) or a one print piece that dose NOT have the sliding rail function, In my instance you will need to add supports where the bottom hooks to…
Purchased the WOLFBOX G850 camera on Amazon but on my 2018 Buick Regal TourX Wagon (aka Opel Insignia) - there was no good spot to mount it near the back window. This PETG printed shroud has holes on the underside for common sized…
Legion go side rail cover extended under angle for Gamesir G8 plus controller for more comfortable viewing angle
In my opinion the GameSir Galileo G8 Plus is currently the best way to play Nintendo Switch 2 in handheld mode. The grip is great but I did not like how the controller put pressure on the consoles joy con pins. This spacer keeps pressure…
I was missing the Vesa mount adapter of my Samsung Monitor so I designed one. :-) It fits my Samsung Odyssey Neo G8 (LS32BG850NUXEN) perfectly. You need 4 screws M4x12 to mount the adapter to the monitor. I decided to use M6 screws to…
Doesn't need supports.
The Gamesir G8 Plus bluetooth controller is just a little too wide to hold the Nintendo Switch in portrait mode so I designed this sleeve to fill in the gap. I started with the holder from…
This bracket is used to mount VG80 light bars to the Modular Hydroponic Tower Garden. Use the metal bracket included with the VG80 light bar and mount it to the support using an M3 bolt and nut. Then the light bar will clip into the…
Shorter Gamesir G8+ holder for RRTronics extender. settings: .2mm nozzle
This two-piece magnetic adapter lets you comfortably use a Samsung Galaxy Z Fold 8 with a case inside the GameSir G8+ controller. The open center provides clearance for many cases with hinge protection, while the separate left and right…
This makes using the OnePlus Open with the G8+ more comfortable by keeping it centered and leveled as the phone has an absurdly large camera bump making it lopsided, giving it a chance to pop out of the controller.
Samsung Odyssey G6,G7,G8 100mm Vesa Mount Adapter I got a second hand monitor and it was missing the Vesa adapter, so I made this today. The following models is used to adapt the Samsung Odyssey interface of the monitor from the original…
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
Originally published here: (WIP) Samsung Galaxy S8 Active g892 case by tato_713 - Thingiverse Thanks to Eryn Hribal for testing this case. This test case was made for the Samsung Galaxy S8 Active ; the case for the regular S8 is here ;…
Since the original is 50€ and hard to get I decided to design this one. This bracket allow you to mount two M.2 SSDs instead of the 2.5 inch drive under the battery of a HP ZBook Fury 15 G8, should also work for the 17 inch model as well…
BMW M3 G80 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
wore rugged version of this case for a month, liked it, so i decided to make my own version :) .3mf file contains settings for honeycomb print, I added my logo and picture and printed with Prusa XL flawlessly dual color :)
Use this piece in place of the ground coffee bin to guide the ground coffee straight to a portafilter. Category: Kitchen & Dining
Adapted as per the instructions in the original model to fit a Samsung Galaxy Tab S10 Plus. This has been printed and tested, but does come up a little large for a Samsung Galaxy Tab S10 Plus without a case, testing with some cases to see…
This is one among a series of modifications I made a couple of years ago for my old childhood keyboard, a Cherry G80-3000 HAO (WKL). The date code on the back indicates it was made in week 27 of 1990 (and “Made in West Germany” :D). The…
This is a stand for holding the Game sir G8. This design did not take into account any modifications to hold against a mobile phone or to use a tablet. Pirnt : Ender-3 V3 Se Slicer : Orca Slicer V 2.1.0. Beta Layer height : 0.2mm infill :…
Case for moto G84 made to be printed with TPU. Print at 100% infill. I used the default 0.2 mm STRUCTURAL printing profile in prusa slicer printed on my MK4S. Print "case-tpu.stl" with TPU and "case-camera.stl" with PLA or PETG (havent…
I just wanted a way to get low-latency audio on my GameSir G8+ and couldn’t find anything online, so I created this myself. It holds my Galaxy Tab S9 without any issues, and I designed it so it should work with different tablets and…
A Cool Looking mag plate for the SMG8. Airsoft use only!!!
I remixed the osvac F32-H32 thing to adapt to my Starmix SG8 vaccum cleaner. Settings are for PETG from manufacturer Material for Print. The attached gcode is for a 0.6mm nozzle. The model will be printable with a 0.4mm nozzle too but…
This small adapter was made to make it easier to mount inexpensive AMG8833 Thermal Camera boards from Aliexpress into this case: https://www.thingiverse.com/thing:2799023 These cheap board have a smaller PCB compared to those sold by…
BMW M3 G81 Touring Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Simple docking station for the HP Elitebook 840 G8 14" mounted in a IKEA Kallax. Splitted in multiple parts to fit in my Bambu X1 and better printability. I used this calbe to connect to an USB-C Hub. https://www.amazon.de/dp/B09J8TRLNX
Discord Key Cap der Tastatur Logitech G815
ENG Some keyboards already have a smartphone holder. Unfortunately, the Logitech G815 is not one of them. So here is the remedy. My version was printed in PLA-CF, but this is purely for the smooth look. The model should work just as well…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
This is an attachment for mounting a smartphone vertically on the GameSir G8 Galileo Controller. By using a mapping app such as Mantis Gamepad, you can control smartphone games that do not support controllers. (Can't the GameSir app map…
Logitech G915 / G815 keyboard switch button (Tactile switch) On the first image there are two transparent ones printed (one in switch, one standing as a model) and the brown is original. Story: I broke my G915 CTRL-key peg that keeps the…
Simple DIN rail mount for Huawei OptiXstar EG8010Hv6 modem. Part1 and Part2 should be glued together
I had a 2,5" SATA SSD lying around. So I wanted to fit it to my newish HP ZBook Fury 15 G8 but it didnt come with the apropriate cage. So I designed this one. It slips under some montign brackets in the frame of the Laptop therefore it…
Remix for the Sage/Breville standalone coffee grinder (Model BCG820 BSS) of a great desing by @Simbungu. The screws go too low in this grinder and you can't tighten the inner part to the base, so it keeps unlocking. Altered the dimension…
Remix of https://makerworld.com/en/models/16169#profileId-57570 for the Samsung Odyssey OLED G8 curved monitor. Tested with an iphone 15 pro
I whipped this together as a proof of concept, I don't own the phone myself - will need feedback from S24 Ultra owners on what doesn't work/fit/etc. I'm hoping the phone can mostly slide in from the top and sit in firmly place thanks to…
Problem: When putting GameSir G8+ gamepad into bag thumb stick always gets caught up in the pockets and items. That's why i design this ultra low profile thumb stick to allow this gamebad to be kept easily into your bags. Model gives you…
Spacer that prevents the USB-C from entering too deep into the phone, thus preventing connection between devices.
Dosing cup for Sage Smart Grinder (BCG820 BSS). Holds up to about 45g of coffee beans which means I can use this for my espresso and pour over grinds. Easy print.
Egy tartóelem az általában panelházakban megtalálható DIGi által adott Huawei routerekhez.
because of heavy use, the antenna of the radio tends to brake. here is my try on a replacement cover.
BMW M4 G82 This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
Mount pattern 25.5mm. TPU printing, no supports needed
I modified The File Slightly so its not Corupted Anymore
Vertical stand for HP elite book 850 G8 have more space on your desk with this easy print! the vents are facing upwards so the the risk of blocking them is reduced :-) rough dimensions: 140mm x 56mm x 55mm (w d h) printer/material related…
Visit my muscle truck series here: https://www.printables.com/@AleksandrBro_3742143/collections/2913550
After upgrading a few lights on my car which mind you is a Holden VE with a Pontiac G8 front conversion. Months after posting this I've noticed Mars Performance (Melbourne, Australia) no longer sell these fog lights... however they do…
Replacement caps for the LostVape Centaurus G80 Pod Mod, inspired by the Ultrakill. The front cap with buttons and the top cap have been tested on a real device; the other models should also match the dimensions, but I ran out of money to…
I’m using a Gamesir G8+ Bluetooth gaming controller paired with a Samsung Galaxy Z Fold7. The problem? The phone doesn’t sit firmly, especially when it’s in its case. It works, but not in a way that inspires confidence. So I designed a…
Descripción General Este mod es la solución que ayuda con el estrangulamiento térmico ( thermal throttling ) cuando juegas títulos pesados o usas emuladores con el GameSir G8 Galileo. El diseño original del control bloquea la parte…
The model is 0.40mm high. I printed at 0.12mm layer height on a smooth plate with top surfaces ironing on. I left the default 0.20mm initial layer so the final print ended up 0.44mm actual height with three print layers. My ironing wasn't…
Detailed silhouette of an M2 g87 !decent adhesion needed!
Samsung Galaxy Fold 8-Gamesir G8+ adapter with magnet for those who are worried the hinge is under stress. Just install the adapter and put your Fold 8 with a Magsafe back protection on the adapter magnet. Magnet:…
Key Cap für die Tastatur Logitech G815
I have remixed a good G82 case. As I prefer the closed bottom with individual cutouts for usb and headphones. I printed with a .4 hotend in TPU95 with 100% infil, 2 walls and tree supports only from the build plate and painted some on for…
Mit 0,25mm Düse in PLA gedruckt.
https://www.thingiverse.com/thing:4556985 I liked thie design from DIY3DTech for my G8 and G7 lenses, but the allways it was lose and the laser wasn´t consistent with moving. Even with a foam pad it wasn´t as stable as i wished, so i…
I was toying with the idea of making the controller more like a drone controller with longer sticks. I figured it might be good for both drone sims and racing games. For sim racing games it's definitely better in terms of precision but I…
Replacement slider cap / knob for Roland JX-10 / JX-8P synths and PG800 controller. Single material, fill the dot manually w/ paint.
cover for motorola moto g85
A small frame for a loop antenna made from RG8 coax. Based on this video's dimensions https://www.youtube.com/watch?v=Ivr9VbSgjUU , just with BNC connectors. The frame is to support it since RG8 is quite thin and flimsy. The loop is…
I wanted to be able to get the lights further away from the plants compared to my original model. Additionally, I wanted to reduce the time to print, enable printing on smaller printers, and be able to provide plant supports. This version…
Dual print with transparent interior so that the button lights up nicely. Nozzle 0.4 Layer 0.2
A spacer for the Gamesir G8+ which allows you to passthrough a USB cable to your phones charging port to charge while playing.
Here are a couple of the custom Lug Nut Covers I made for the G8 GT. One is embossed and the other engraved style. You can print the top few layers in a different color to give more visual effect or you can paint them of course. You are…
Wind deflector inserts for the BMW M4 Convertible (G83). Tab of the insert presses the sensor wire in the slot which allows automatic top operation without the wind deflector installed, which is required for the US model. The car needs…
Remix of https://www.printables.com/model/510666-joystick-savers-v2 combined with oval "Wings" from https://www.thingiverse.com/thing:5349829 for GameSir G8/G8 Plus. Print Settings Printer Brand: Monoprice Printer: Select Mini V2 (E3D)…
Y'know the drill, control surfaces and swing wings.
All printable without support at 0.1mm layer
Modified to fit TBS UNIFY PRO 5G8 HV VTX. Check this it you need complete Chameleon Ti rear end: https://www.thingiverse.com/thing:3654907 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2…
Problem: When putting GameSir G8+ gamepad into bag thumb stick always gets caught up in the pockets and items. That's why i design this ultra low profile thumb stick to allow this gamebad to be kept easily into your bags. Model gives you…
